#include <config.h>
#include "protocol.h"
-#include "dslogic.h"
#include <math.h>
static const struct fx2lafw_profile supported_fx2[] = {
"fx2lafw-cwav-usbeezx.fw",
0, NULL, NULL},
- /* DreamSourceLab DSLogic (before FW upload) */
- { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL,
- "dreamsourcelab-dslogic-fx2.fw",
- DEV_CAPS_16BIT, NULL, NULL},
- /* DreamSourceLab DSLogic (after FW upload) */
- { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL,
- "dreamsourcelab-dslogic-fx2.fw",
- DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"},
-
- /* DreamSourceLab DSCope (before FW upload) */
- { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL,
- "dreamsourcelab-dscope-fx2.fw",
- DEV_CAPS_16BIT, NULL, NULL},
- /* DreamSourceLab DSCope (after FW upload) */
- { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL,
- "dreamsourcelab-dscope-fx2.fw",
- DEV_CAPS_16BIT, "DreamSourceLab", "DSCope"},
-
- /* DreamSourceLab DSLogic Pro (before FW upload) */
- { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL,
- "dreamsourcelab-dslogic-pro-fx2.fw",
- DEV_CAPS_16BIT, NULL, NULL},
- /* DreamSourceLab DSLogic Pro (after FW upload) */
- { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL,
- "dreamsourcelab-dslogic-pro-fx2.fw",
- DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"},
-
/*
* Saleae Logic
* EE Electronics ESLA100
SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
};
-static const uint32_t dslogic_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET | SR_CONF_GET,
- SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
- SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
- SR_CONF_CONN | SR_CONF_GET,
- SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
- SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
- SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
- SR_CONF_EXTERNAL_CLOCK | SR_CONF_GET | SR_CONF_SET,
- SR_CONF_CLOCK_EDGE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
-};
-
static const int32_t soft_trigger_matches[] = {
SR_TRIGGER_ZERO,
SR_TRIGGER_ONE,
SR_TRIGGER_EDGE,
};
-/* Names assigned to available edge slope choices. */
-static const char *const signal_edge_names[] = {
- [DS_EDGE_RISING] = "rising",
- [DS_EDGE_FALLING] = "falling",
-};
-
-static const struct {
- int range;
- gdouble low;
- gdouble high;
-} volt_thresholds[] = {
- { DS_VOLTAGE_RANGE_18_33_V, 0.7, 1.4 },
- { DS_VOLTAGE_RANGE_5_V, 1.4, 3.6 },
-};
-
static const uint64_t samplerates[] = {
SR_KHZ(20),
SR_KHZ(25),
SR_MHZ(24),
};
-static const uint64_t dslogic_samplerates[] = {
- SR_KHZ(10),
- SR_KHZ(20),
- SR_KHZ(50),
- SR_KHZ(100),
- SR_KHZ(200),
- SR_KHZ(500),
- SR_MHZ(1),
- SR_MHZ(2),
- SR_MHZ(5),
- SR_MHZ(10),
- SR_MHZ(20),
- SR_MHZ(25),
- SR_MHZ(50),
- SR_MHZ(100),
- SR_MHZ(200),
- SR_MHZ(400),
-};
+static gboolean is_plausible(const struct libusb_device_descriptor *des)
+{
+ int i;
+
+ for (i = 0; supported_fx2[i].vid; i++) {
+ if (des->idVendor != supported_fx2[i].vid)
+ continue;
+ if (des->idProduct == supported_fx2[i].pid)
+ return TRUE;
+ }
+
+ return FALSE;
+}
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
libusb_get_device_descriptor( devlist[i], &des);
- if ((ret = libusb_open(devlist[i], &hdl)) < 0)
+ if (!is_plausible(&des))
continue;
+ if ((ret = libusb_open(devlist[i], &hdl)) < 0) {
+ sr_warn("Failed to open potential device with "
+ "VID:PID %04x:%04x: %s.", des.idVendor,
+ des.idProduct, libusb_error_name(ret));
+ continue;
+ }
+
if (des.iManufacturer == 0) {
manufacturer[0] = '\0';
} else if ((ret = libusb_get_string_descriptor_ascii(hdl,
des.idProduct == supported_fx2[j].pid &&
(!supported_fx2[j].usb_manufacturer ||
!strcmp(manufacturer, supported_fx2[j].usb_manufacturer)) &&
- (!supported_fx2[j].usb_manufacturer ||
+ (!supported_fx2[j].usb_product ||
!strcmp(product, supported_fx2[j].usb_product))) {
prof = &supported_fx2[j];
break;
devc = fx2lafw_dev_new();
devc->profile = prof;
- if ((prof->dev_caps & DEV_CAPS_16BIT) || (prof->dev_caps & DEV_CAPS_AX_ANALOG))
- devc->sample_wide = TRUE;
sdi->priv = devc;
devices = g_slist_append(devices, sdi);
- if (!strcmp(prof->model, "DSLogic")
- || !strcmp(prof->model, "DSLogic Pro")
- || !strcmp(prof->model, "DSCope")) {
- devc->dslogic = TRUE;
- devc->samplerates = dslogic_samplerates;
- devc->num_samplerates = ARRAY_SIZE(dslogic_samplerates);
- has_firmware = match_manuf_prod(devlist[i], "DreamSourceLab", "DSLogic")
- || match_manuf_prod(devlist[i], "DreamSourceLab", "DSCope");
- } else {
- devc->dslogic = FALSE;
- devc->samplerates = samplerates;
- devc->num_samplerates = ARRAY_SIZE(samplerates);
- has_firmware = match_manuf_prod(devlist[i],
- "sigrok", "fx2lafw");
- }
+ devc->samplerates = samplerates;
+ devc->num_samplerates = ARRAY_SIZE(samplerates);
+ has_firmware = usb_match_manuf_prod(devlist[i],
+ "sigrok", "fx2lafw");
if (has_firmware) {
/* Already has the firmware, so fix the new address. */
struct sr_dev_driver *di = sdi->driver;
struct sr_usb_dev_inst *usb;
struct dev_context *devc;
- const char *fpga_firmware = NULL;
int ret;
int64_t timediff_us, timediff_ms;
return SR_ERR;
}
- if (devc->dslogic) {
- if (!strcmp(devc->profile->model, "DSLogic")) {
- if (devc->dslogic_voltage_threshold == DS_VOLTAGE_RANGE_18_33_V)
- fpga_firmware = DSLOGIC_FPGA_FIRMWARE_3V3;
- else
- fpga_firmware = DSLOGIC_FPGA_FIRMWARE_5V;
- } else if (!strcmp(devc->profile->model, "DSLogic Pro")){
- fpga_firmware = DSLOGIC_PRO_FPGA_FIRMWARE;
- } else if (!strcmp(devc->profile->model, "DSCope")) {
- fpga_firmware = DSCOPE_FPGA_FIRMWARE;
- }
-
- if ((ret = dslogic_fpga_firmware_upload(sdi, fpga_firmware)) != SR_OK)
- return ret;
- }
if (devc->cur_samplerate == 0) {
/* Samplerate hasn't been set; default to the slowest one. */
devc->cur_samplerate = devc->samplerates[0];
usb = sdi->conn;
if (!usb->devhdl)
- return SR_ERR;
+ return SR_ERR_BUG;
sr_info("fx2lafw: Closing device on %d.%d (logical) / %s (physical) interface %d.",
usb->bus, usb->address, sdi->connection_id, USB_INTERFACE);
libusb_release_interface(usb->devhdl, USB_INTERFACE);
libusb_close(usb->devhdl);
usb->devhdl = NULL;
- sdi->status = SR_ST_INACTIVE;
return SR_OK;
}
{
struct dev_context *devc;
struct sr_usb_dev_inst *usb;
- GVariant *range[2];
- unsigned int i;
char str[128];
(void)cg;
snprintf(str, 128, "%d.%d", usb->bus, usb->address);
*data = g_variant_new_string(str);
break;
- case SR_CONF_VOLTAGE_THRESHOLD:
- for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
- if (volt_thresholds[i].range != devc->dslogic_voltage_threshold)
- continue;
- range[0] = g_variant_new_double(volt_thresholds[i].low);
- range[1] = g_variant_new_double(volt_thresholds[i].high);
- *data = g_variant_new_tuple(range, 2);
- break;
- }
- break;
case SR_CONF_LIMIT_SAMPLES:
*data = g_variant_new_uint64(devc->limit_samples);
break;
case SR_CONF_CAPTURE_RATIO:
*data = g_variant_new_uint64(devc->capture_ratio);
break;
- case SR_CONF_EXTERNAL_CLOCK:
- *data = g_variant_new_boolean(devc->dslogic_external_clock);
- break;
- case SR_CONF_CONTINUOUS:
- *data = g_variant_new_boolean(devc->dslogic_continuous_mode);
- break;
- case SR_CONF_CLOCK_EDGE:
- i = devc->dslogic_clock_edge;
- if (i >= ARRAY_SIZE(signal_edge_names))
- return SR_ERR_BUG;
- *data = g_variant_new_string(signal_edge_names[0]);
- break;
default:
return SR_ERR_NA;
}
return SR_OK;
}
-/*
- * Helper for mapping a string-typed configuration value to an index
- * within a table of possible values.
- */
-static int lookup_index(GVariant *value, const char *const *table, int len)
-{
- const char *entry;
- int i;
-
- entry = g_variant_get_string(value, NULL);
- if (!entry)
- return -1;
-
- /* Linear search is fine for very small tables. */
- for (i = 0; i < len; i++) {
- if (strcmp(entry, table[i]) == 0)
- return i;
- }
-
- return -1;
-}
-
static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
uint64_t arg;
int i, ret;
- gdouble low, high;
(void)cg;
if (!sdi)
return SR_ERR_ARG;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR;
-
devc = sdi->priv;
ret = SR_OK;
devc->capture_ratio = g_variant_get_uint64(data);
ret = (devc->capture_ratio > 100) ? SR_ERR : SR_OK;
break;
- case SR_CONF_VOLTAGE_THRESHOLD:
- g_variant_get(data, "(dd)", &low, &high);
- ret = SR_ERR_ARG;
- for (i = 0; (unsigned int)i < ARRAY_SIZE(volt_thresholds); i++) {
- if (fabs(volt_thresholds[i].low - low) < 0.1 &&
- fabs(volt_thresholds[i].high - high) < 0.1) {
- devc->dslogic_voltage_threshold = volt_thresholds[i].range;
- break;
- }
- }
- if (!strcmp(devc->profile->model, "DSLogic")) {
- if (devc->dslogic_voltage_threshold == DS_VOLTAGE_RANGE_5_V)
- ret = dslogic_fpga_firmware_upload(sdi, DSLOGIC_FPGA_FIRMWARE_5V);
- else
- ret = dslogic_fpga_firmware_upload(sdi, DSLOGIC_FPGA_FIRMWARE_3V3);
- } else if (!strcmp(devc->profile->model, "DSLogic Pro")) {
- ret = dslogic_fpga_firmware_upload(sdi, DSLOGIC_PRO_FPGA_FIRMWARE);
- }
- break;
- case SR_CONF_EXTERNAL_CLOCK:
- devc->dslogic_external_clock = g_variant_get_boolean(data);
- break;
- case SR_CONF_CONTINUOUS:
- devc->dslogic_continuous_mode = g_variant_get_boolean(data);
- break;
- case SR_CONF_CLOCK_EDGE:
- i = lookup_index(data, signal_edge_names,
- ARRAY_SIZE(signal_edge_names));
- if (i < 0)
- return SR_ERR_ARG;
- devc->dslogic_clock_edge = i;
- break;
default:
ret = SR_ERR_NA;
}
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
- GVariant *gvar, *range[2];
+ GVariant *gvar;
GVariantBuilder gvb;
- unsigned int i;
(void)cg;
drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
} else {
devc = sdi->priv;
- if (!devc->dslogic)
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
- else
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- dslogic_devopts, ARRAY_SIZE(dslogic_devopts), sizeof(uint32_t));
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
+ devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
}
break;
- case SR_CONF_VOLTAGE_THRESHOLD:
- if (!sdi->priv)
- return SR_ERR_ARG;
- devc = sdi->priv;
- if (!devc->dslogic)
- return SR_ERR_NA;
- g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
- for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
- range[0] = g_variant_new_double(volt_thresholds[i].low);
- range[1] = g_variant_new_double(volt_thresholds[i].high);
- gvar = g_variant_new_tuple(range, 2);
- g_variant_builder_add_value(&gvb, gvar);
- }
- *data = g_variant_builder_end(&gvb);
- break;
case SR_CONF_SAMPLERATE:
devc = sdi->priv;
g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
soft_trigger_matches, ARRAY_SIZE(soft_trigger_matches),
sizeof(int32_t));
break;
- case SR_CONF_CLOCK_EDGE:
- *data = g_variant_new_strv(signal_edge_names,
- ARRAY_SIZE(signal_edge_names));
- break;
default:
return SR_ERR_NA;
}
return SR_OK;
}
-static int receive_data(int fd, int revents, void *cb_data)
-{
- struct timeval tv;
- struct drv_context *drvc;
-
- (void)fd;
- (void)revents;
-
- drvc = (struct drv_context *)cb_data;
-
- tv.tv_sec = tv.tv_usec = 0;
- libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
-
- return TRUE;
-}
-
-static int start_transfers(const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- struct sr_usb_dev_inst *usb;
- struct sr_trigger *trigger;
- struct libusb_transfer *transfer;
- unsigned int i, num_transfers;
- int endpoint, timeout, ret;
- unsigned char *buf;
- size_t size;
-
- devc = sdi->priv;
- usb = sdi->conn;
-
- devc->sent_samples = 0;
- devc->acq_aborted = FALSE;
- devc->empty_transfer_count = 0;
-
- if ((trigger = sr_session_trigger_get(sdi->session)) && !devc->dslogic) {
- int pre_trigger_samples = 0;
- if (devc->limit_samples > 0)
- pre_trigger_samples = devc->capture_ratio * devc->limit_samples/100;
- devc->stl = soft_trigger_logic_new(sdi, trigger, pre_trigger_samples);
- if (!devc->stl)
- return SR_ERR_MALLOC;
- devc->trigger_fired = FALSE;
- } else
- devc->trigger_fired = TRUE;
-
- num_transfers = fx2lafw_get_number_of_transfers(devc);
-
- //if (devc->dslogic)
- // num_transfers = dslogic_get_number_of_transfers(devc);
-
- if (devc->dslogic) {
- if (devc->cur_samplerate == SR_MHZ(100))
- num_transfers = 16;
- else if (devc->cur_samplerate == SR_MHZ(200))
- num_transfers = 8;
- else if (devc->cur_samplerate == SR_MHZ(400))
- num_transfers = 4;
- }
-
- size = fx2lafw_get_buffer_size(devc);
- devc->submitted_transfers = 0;
-
- devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
- if (!devc->transfers) {
- sr_err("USB transfers malloc failed.");
- return SR_ERR_MALLOC;
- }
-
- timeout = fx2lafw_get_timeout(devc);
- endpoint = devc->dslogic ? 6 : 2;
- devc->num_transfers = num_transfers;
- for (i = 0; i < num_transfers; i++) {
- if (!(buf = g_try_malloc(size))) {
- sr_err("USB transfer buffer malloc failed.");
- return SR_ERR_MALLOC;
- }
- transfer = libusb_alloc_transfer(0);
- libusb_fill_bulk_transfer(transfer, usb->devhdl,
- endpoint | LIBUSB_ENDPOINT_IN, buf, size,
- fx2lafw_receive_transfer, (void *)sdi, timeout);
- sr_info("submitting transfer: %d", i);
- if ((ret = libusb_submit_transfer(transfer)) != 0) {
- sr_err("Failed to submit transfer: %s.",
- libusb_error_name(ret));
- libusb_free_transfer(transfer);
- g_free(buf);
- fx2lafw_abort_acquisition(devc);
- return SR_ERR;
- }
- devc->transfers[i] = transfer;
- devc->submitted_transfers++;
- }
-
- if (devc->profile->dev_caps & DEV_CAPS_AX_ANALOG)
- devc->send_data_proc = mso_send_data_proc;
- else
- devc->send_data_proc = la_send_data_proc;
-
- std_session_send_df_header(sdi);
-
- return SR_OK;
-}
-
-static void LIBUSB_CALL dslogic_trigger_receive(struct libusb_transfer *transfer)
-{
- const struct sr_dev_inst *sdi;
- struct dslogic_trigger_pos *tpos;
- struct dev_context *devc;
-
- sdi = transfer->user_data;
- devc = sdi->priv;
- if (transfer->status == LIBUSB_TRANSFER_CANCELLED) {
- sr_dbg("Trigger transfer canceled.");
- /* Terminate session. */
- std_session_send_df_end(sdi);
- usb_source_remove(sdi->session, devc->ctx);
- devc->num_transfers = 0;
- g_free(devc->transfers);
- if (devc->stl) {
- soft_trigger_logic_free(devc->stl);
- devc->stl = NULL;
- }
- } else if (transfer->status == LIBUSB_TRANSFER_COMPLETED
- && transfer->actual_length == sizeof(struct dslogic_trigger_pos)) {
- tpos = (struct dslogic_trigger_pos *)transfer->buffer;
- sr_info("tpos real_pos %d ram_saddr %d cnt %d", tpos->real_pos,
- tpos->ram_saddr, tpos->remain_cnt);
- devc->trigger_pos = tpos->real_pos;
- g_free(tpos);
- start_transfers(sdi);
- }
- libusb_free_transfer(transfer);
-}
-
-static int dslogic_trigger_request(const struct sr_dev_inst *sdi)
-{
- struct sr_usb_dev_inst *usb;
- struct libusb_transfer *transfer;
- struct dslogic_trigger_pos *tpos;
- struct dev_context *devc;
- int ret;
-
- usb = sdi->conn;
- devc = sdi->priv;
-
- if ((ret = dslogic_stop_acquisition(sdi)) != SR_OK)
- return ret;
-
- if ((ret = dslogic_fpga_configure(sdi)) != SR_OK)
- return ret;
-
- /* If this is a DSLogic Pro, set the voltage threshold. */
- if (!strcmp(devc->profile->model, "DSLogic Pro")){
- if (devc->dslogic_voltage_threshold == DS_VOLTAGE_RANGE_18_33_V) {
- dslogic_set_vth(sdi, 1.4);
- } else {
- dslogic_set_vth(sdi, 3.3);
- }
- }
-
- if ((ret = dslogic_start_acquisition(sdi)) != SR_OK)
- return ret;
-
- sr_dbg("Getting trigger.");
- tpos = g_malloc(sizeof(struct dslogic_trigger_pos));
- transfer = libusb_alloc_transfer(0);
- libusb_fill_bulk_transfer(transfer, usb->devhdl, 6 | LIBUSB_ENDPOINT_IN,
- (unsigned char *)tpos, sizeof(struct dslogic_trigger_pos),
- dslogic_trigger_receive, (void *)sdi, 0);
- if ((ret = libusb_submit_transfer(transfer)) < 0) {
- sr_err("Failed to request trigger: %s.", libusb_error_name(ret));
- libusb_free_transfer(transfer);
- g_free(tpos);
- return SR_ERR;
- }
-
- devc->transfers = g_try_malloc0(sizeof(*devc->transfers));
- if (!devc->transfers) {
- sr_err("USB trigger_pos transfer malloc failed.");
- return SR_ERR_MALLOC;
- }
- devc->num_transfers = 1;
- devc->submitted_transfers++;
- devc->transfers[0] = transfer;
-
- return ret;
-}
-
-static int configure_channels(const struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- const GSList *l;
- int p;
- struct sr_channel *ch;
-
- devc = sdi->priv;
-
- g_slist_free(devc->enabled_analog_channels);
- devc->enabled_analog_channels = NULL;
- memset(devc->ch_enabled, 0, sizeof(devc->ch_enabled));
-
- for (l = sdi->channels, p = 0; l; l = l->next, p++) {
- ch = l->data;
- if ((p <= NUM_CHANNELS) && (ch->type == SR_CHANNEL_ANALOG)) {
- devc->ch_enabled[p] = ch->enabled;
- devc->enabled_analog_channels =
- g_slist_append(devc->enabled_analog_channels, ch);
- }
- }
-
- return SR_OK;
-}
-
-static int dev_acquisition_start(const struct sr_dev_inst *sdi)
-{
- struct sr_dev_driver *di;
- struct drv_context *drvc;
- struct dev_context *devc;
- int timeout, ret;
- size_t size;
-
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- di = sdi->driver;
- drvc = di->context;
- devc = sdi->priv;
-
- devc->ctx = drvc->sr_ctx;
- devc->sent_samples = 0;
- devc->empty_transfer_count = 0;
- devc->acq_aborted = FALSE;
-
- if (configure_channels(sdi) != SR_OK) {
- sr_err("Failed to configure channels.");
- return SR_ERR;
- }
-
- timeout = fx2lafw_get_timeout(devc);
- usb_source_add(sdi->session, devc->ctx, timeout, receive_data, drvc);
-
- if (devc->dslogic) {
- dslogic_trigger_request(sdi);
- } else {
- size = fx2lafw_get_buffer_size(devc);
- /* Prepare for analog sampling. */
- if (devc->profile->dev_caps & DEV_CAPS_AX_ANALOG) {
- /* We need a buffer half the size of a transfer. */
- devc->logic_buffer = g_try_malloc(size / 2);
- devc->analog_buffer = g_try_malloc(
- sizeof(float) * size / 2);
- }
- start_transfers(sdi);
- if ((ret = fx2lafw_command_start_acquisition(sdi)) != SR_OK) {
- fx2lafw_abort_acquisition(devc);
- return ret;
- }
- }
-
- return SR_OK;
-}
-
static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
- struct dev_context *devc;
-
- devc = sdi->priv;
-
- if (devc->dslogic)
- dslogic_stop_acquisition(sdi);
-
fx2lafw_abort_acquisition(sdi->priv);
return SR_OK;
.config_list = config_list,
.dev_open = dev_open,
.dev_close = dev_close,
- .dev_acquisition_start = dev_acquisition_start,
+ .dev_acquisition_start = fx2lafw_start_acquisition,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
projects / libsigrok.git / blobdiff