]> sigrok.org Git - libsigrok.git/blobdiff - sigrok.h
sr: adjust copyright year
[libsigrok.git] / sigrok.h
index e3b6ac78c56dbd5de0e27d626671ad9e3ce28fa6..e12c5bc5acc6b4479f88cdb07e42f26c17b05b63 100644 (file)
--- a/sigrok.h
+++ b/sigrok.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the sigrok project.
  *
- * Copyright (C) 2010 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef SIGROK_SIGROK_H
-#define SIGROK_SIGROK_H
+#ifndef LIBSIGROK_SIGROK_H
+#define LIBSIGROK_SIGROK_H
 
 #include <stdio.h>
 #include <sys/time.h>
 #include <stdint.h>
 #include <inttypes.h>
 #include <glib.h>
-#include <libusb.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -48,131 +47,120 @@ extern "C" {
  * or reused for different #defines later. You can only add new #defines and
  * return codes, but never remove or redefine existing ones.
  */
-#define SIGROK_OK                 0 /* No error */
-#define SIGROK_ERR               -1 /* Generic/unspecified error */
-#define SIGROK_ERR_MALLOC        -2 /* Malloc/calloc/realloc error */
-#define SIGROK_ERR_SAMPLERATE    -3 /* Incorrect samplerate */
+#define SR_OK                 0 /* No error */
+#define SR_ERR               -1 /* Generic/unspecified error */
+#define SR_ERR_MALLOC        -2 /* Malloc/calloc/realloc error */
+#define SR_ERR_ARG           -3 /* Function argument error */
+#define SR_ERR_BUG           -4 /* Errors hinting at internal bugs */
+#define SR_ERR_SAMPLERATE    -5 /* Incorrect samplerate */
 
-/* limited by uint64_t */
-#define MAX_NUM_PROBES 64
-#define MAX_PROBENAME_LEN 32
+#define SR_MAX_NUM_PROBES    64 /* Limited by uint64_t. */
+#define SR_MAX_PROBENAME_LEN 32
 
 /* Handy little macros */
-#define KHZ(n) ((n) * 1000)
-#define MHZ(n) ((n) * 1000000)
-#define GHZ(n) ((n) * 1000000000)
+#define SR_HZ(n)  (n)
+#define SR_KHZ(n) ((n) * 1000)
+#define SR_MHZ(n) ((n) * 1000000)
+#define SR_GHZ(n) ((n) * 1000000000)
 
-#define HZ_TO_NS(n) (1000000000 / (n))
+#define SR_HZ_TO_NS(n) (1000000000 / (n))
 
-#ifndef ARRAY_SIZE
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
-#endif
+/* libsigrok loglevels. */
+#define SR_LOG_NONE               0 /**< Output no messages at all. */
+#define SR_LOG_ERR            1 /**< Output error messages. */
+#define SR_LOG_WARN               2 /**< Output warnings. */
+#define SR_LOG_INFO               3 /**< Output informational messages. */
+#define SR_LOG_DBG            4 /**< Output debug messages. */
+#define SR_LOG_SPEW               5 /**< Output very noisy debug messages. */
 
-#ifndef ARRAY_AND_SIZE
-#define ARRAY_AND_SIZE(a) (a), ARRAY_SIZE(a)
-#endif
+/*
+ * Use SR_API to mark public API symbols, and SR_PRIV for private symbols.
+ *
+ * Variables and functions marked 'static' are private already and don't
+ * need SR_PRIV. However, functions which are not static (because they need
+ * to be used in other libsigrok-internal files) but are also not meant to
+ * be part of the public libsigrok API, must use SR_PRIV.
+ *
+ * This uses the 'visibility' feature of gcc (requires gcc >= 4.0).
+ *
+ * Details: http://gcc.gnu.org/wiki/Visibility
+ */
 
-typedef int (*receive_data_callback) (int fd, int revents, void *user_data);
+/* Marks public libsigrok API symbols. */
+#define SR_API __attribute__((visibility("default")))
 
-/* Data types used by hardware plugins for set_configuration() */
-enum {
-       T_UINT64,
-       T_CHAR,
-};
+/* Marks private, non-public libsigrok symbols (not part of the API). */
+#define SR_PRIV __attribute__((visibility("hidden")))
 
-enum {
-       PROTO_RAW,
-};
+typedef int (*sr_receive_data_callback) (int fd, int revents, void *user_data);
 
-/* (Unused) protocol decoder stack entry */
-struct protocol {
-       char *name;
-       int id;
-       int stackindex;
+/* Data types used by hardware plugins for set_configuration() */
+enum {
+       SR_T_UINT64,
+       SR_T_CHAR,
+       SR_T_BOOL,
 };
 
-/* datafeed_packet.type values */
+/* sr_datafeed_packet.type values */
 enum {
-       DF_HEADER,
-       DF_END,
-       DF_TRIGGER,
-       DF_LOGIC,
-       DF_ANALOG,
-       DF_PD,
+       SR_DF_HEADER,
+       SR_DF_END,
+       SR_DF_TRIGGER,
+       SR_DF_LOGIC,
+       SR_DF_PD,
 };
 
-struct datafeed_packet {
+struct sr_datafeed_packet {
        uint16_t type;
-       uint64_t length;
-       uint16_t unitsize;
        void *payload;
 };
 
-struct datafeed_header {
+struct sr_datafeed_header {
        int feed_version;
        struct timeval starttime;
        uint64_t samplerate;
-       int protocol_id;
-       int num_analog_probes;
        int num_logic_probes;
 };
 
-struct analog_probe {
-       uint8_t att;
-       uint8_t res;    /* Needs to be a power of 2, FIXME */
-       uint16_t val;   /* Max hardware ADC width is 16bits */
-};
-
-struct analog_sample {
-       uint8_t num_probes; /* Max hardware probes is 256 */
-       struct analog_probe probes[];
+struct sr_datafeed_logic {
+       uint64_t length;
+       uint16_t unitsize;
+       void *data;
 };
 
-struct input {
-       struct input_format *format;
+struct sr_input {
+       struct sr_input_format *format;
        char *param;
-       struct device *vdevice;
+       struct sr_device *vdevice;
 };
 
-struct input_format {
-       char *extension;
+struct sr_input_format {
+       char *id;
        char *description;
        int (*format_match) (const char *filename);
-       int (*init) (struct input *in);
-       int (*loadfile) (struct input *in, const char *filename);
+       int (*init) (struct sr_input *in);
+       int (*loadfile) (struct sr_input *in, const char *filename);
 };
 
-struct output {
-       struct output_format *format;
-       struct device *device;
+struct sr_output {
+       struct sr_output_format *format;
+       struct sr_device *device;
        char *param;
        void *internal;
 };
 
-struct output_format {
-       char *extension;
+struct sr_output_format {
+       char *id;
        char *description;
        int df_type;
-       int (*init) (struct output *o);
-       int (*data) (struct output *o, char *data_in, uint64_t length_in,
-                    char **data_out, uint64_t *length_out);
-       int (*event) (struct output *o, int event_type, char **data_out,
+       int (*init) (struct sr_output *o);
+       int (*data) (struct sr_output *o, const char *data_in,
+                    uint64_t length_in, char **data_out, uint64_t *length_out);
+       int (*event) (struct sr_output *o, int event_type, char **data_out,
                      uint64_t *length_out);
 };
 
-struct analyzer {
-       char *name;
-       char *filename;
-       /*
-        * TODO: Parameters? If so, configured plugins need another struct.
-        * TODO: Input and output format?
-        */
-};
-
-/* Size of a chunk in units */
-#define DATASTORE_CHUNKSIZE 512000
-
-struct datastore {
+struct sr_datastore {
        /* Size in bytes of the number of units stored in this datastore */
        int ds_unitsize;
        unsigned int num_units; /* TODO: uint64_t */
@@ -185,23 +173,22 @@ struct datastore {
  * to the device index within that plugin; it may be handling more than one
  * device. All relevant plugin calls take a device_index parameter for this.
  */
-struct device {
+struct sr_device {
        /* Which plugin handles this device */
-       struct device_plugin *plugin;
+       struct sr_device_plugin *plugin;
        /* A plugin may handle multiple devices of the same type */
        int plugin_index;
-       /* List of struct probe* */
+       /* List of struct sr_probe* */
        GSList *probes;
        /* Data acquired by this device, if any */
-       struct datastore *datastore;
+       struct sr_datastore *datastore;
 };
 
 enum {
-       PROBE_TYPE_LOGIC,
-       PROBE_TYPE_ANALOG,
+       SR_PROBE_TYPE_LOGIC,
 };
 
-struct probe {
+struct sr_probe {
        int index;
        int type;
        gboolean enabled;
@@ -209,34 +196,87 @@ struct probe {
        char *trigger;
 };
 
-extern GSList *devices;
-
 /* Hardware plugin capabilities */
 enum {
-       HWCAP_DUMMY,             /* Used to terminate lists */
-       /* device classes */
-       HWCAP_LOGIC_ANALYZER,
-
-       /* device options */
-       HWCAP_SAMPLERATE,        /* Change samplerate */
-       HWCAP_PROBECONFIG,       /* Configure probe mask */
-       HWCAP_CAPTURE_RATIO,     /* Set pre/post-trigger capture ratio */
-       HWCAP_PATTERN_MODE,      /* Pattern generator mode */
-
-       /* acquisition modes */
-       HWCAP_LIMIT_MSEC,        /* Set a time limit for sample acquisition */
-       HWCAP_LIMIT_SAMPLES,     /* Set a limit on number of samples */
-       HWCAP_CONTINUOUS,
+       SR_HWCAP_DUMMY = 0, /* Used to terminate lists. Must be 0! */
+
+       /*--- Device classes ------------------------------------------------*/
+
+       /** The device can act as logic analyzer. */
+       SR_HWCAP_LOGIC_ANALYZER,
+
+       /* TODO: SR_HWCAP_SCOPE, SW_HWCAP_PATTERN_GENERATOR, etc.? */
+
+       /*--- Device types --------------------------------------------------*/
+
+       /** The device is demo device. */
+       SR_HWCAP_DEMO_DEVICE,
+
+       /*--- Device options ------------------------------------------------*/
+
+       /** The device supports setting/changing its samplerate. */
+       SR_HWCAP_SAMPLERATE,
+
+       /* TODO: Better description? Rename to PROBE_AND_TRIGGER_CONFIG? */
+       /** The device supports setting a probe mask. */
+       SR_HWCAP_PROBECONFIG,
+
+       /** The device supports setting a pre/post-trigger capture ratio. */
+       SR_HWCAP_CAPTURE_RATIO,
+
+       /* TODO? */
+       /** The device supports setting a pattern (pattern generator mode). */
+       SR_HWCAP_PATTERN_MODE,
+
+       /** The device supports Run Length Encoding. */
+       SR_HWCAP_RLE,
+
+       /*--- Special stuff -------------------------------------------------*/
+
+       /* TODO: Better description. */
+       /** The device supports specifying a capturefile to inject. */
+       SR_HWCAP_CAPTUREFILE,
+
+       /* TODO: Better description. */
+       /** The device supports specifying the capturefile unit size. */
+       SR_HWCAP_CAPTURE_UNITSIZE,
+
+       /* TODO: Better description. */
+       /** The device supports setting the number of probes. */
+       SR_HWCAP_CAPTURE_NUM_PROBES,
+
+       /*--- Acquisition modes ---------------------------------------------*/
+
+       /**
+        * The device supports setting a sample time limit, i.e. how long the
+        * sample acquisition should run (in ms).
+        */
+       SR_HWCAP_LIMIT_MSEC,
+
+       /**
+        * The device supports setting a sample number limit, i.e. how many
+        * samples should be acquired.
+        */
+       SR_HWCAP_LIMIT_SAMPLES,
+
+       /**
+        * The device supports continuous sampling, i.e. neither a time limit
+        * nor a sample number limit has to be supplied, it will just acquire
+        * samples continuously, until explicitly stopped by a certain command.
+        */
+       SR_HWCAP_CONTINUOUS,
+
+       /* TODO: SR_HWCAP_JUST_SAMPLE or similar. */
 };
 
-struct hwcap_option {
+struct sr_hwcap_option {
        int capability;
        int type;
        char *description;
        char *shortname;
 };
 
-struct sigrok_device_instance {
+struct sr_device_instance {
        int index;
        int status;
        int instance_type;
@@ -244,38 +284,23 @@ struct sigrok_device_instance {
        char *model;
        char *version;
        void *priv;
-       union {
-               struct usb_device_instance *usb;
-               struct serial_device_instance *serial;
-       };
 };
 
-/* sigrok_device_instance types */
+/* sr_device_instance types */
 enum {
-       USB_INSTANCE,
-       SERIAL_INSTANCE,
-};
-
-struct usb_device_instance {
-       uint8_t bus;
-       uint8_t address;
-       struct libusb_device_handle *devhdl;
-};
-
-struct serial_device_instance {
-       char *port;
-       int fd;
+       SR_USB_INSTANCE,
+       SR_SERIAL_INSTANCE,
 };
 
 /* Device instance status */
 enum {
-       ST_NOT_FOUND,
+       SR_ST_NOT_FOUND,
        /* Found, but still booting */
-       ST_INITIALIZING,
+       SR_ST_INITIALIZING,
        /* Live, but not in use */
-       ST_INACTIVE,
+       SR_ST_INACTIVE,
        /* Actively in use in a session */
-       ST_ACTIVE,
+       SR_ST_ACTIVE,
 };
 
 /*
@@ -285,18 +310,20 @@ enum {
 
 /* Device info IDs */
 enum {
-       /* struct sigrok_device_instance for this specific device */
-       DI_INSTANCE,
+       /* struct sr_device_instance for this specific device */
+       SR_DI_INSTANCE,
        /* The number of probes connected to this device */
-       DI_NUM_PROBES,
-       /* Samplerates supported by this device, (struct samplerates) */
-       DI_SAMPLERATES,
+       SR_DI_NUM_PROBES,
+       /* The probe names on this device */
+       SR_DI_PROBE_NAMES,
+       /* Samplerates supported by this device, (struct sr_samplerates) */
+       SR_DI_SAMPLERATES,
        /* Types of trigger supported, out of "01crf" (char *) */
-       DI_TRIGGER_TYPES,
+       SR_DI_TRIGGER_TYPES,
        /* The currently set samplerate in Hz (uint64_t) */
-       DI_CUR_SAMPLERATE,
+       SR_DI_CUR_SAMPLERATE,
        /* Supported pattern generator modes */
-       DI_PATTERNMODES,
+       SR_DI_PATTERNMODES,
 };
 
 /*
@@ -304,23 +331,24 @@ enum {
  * granularity, or is limited to a set of defined samplerates. Use either
  * step or list, but not both.
  */
-struct samplerates {
+struct sr_samplerates {
        uint64_t low;
        uint64_t high;
        uint64_t step;
        uint64_t *list;
 };
 
-struct device_plugin {
+struct sr_device_plugin {
        /* Plugin-specific */
        char *name;
+       char *longname;
        int api_version;
-       int (*init) (char *deviceinfo);
+       int (*init) (const char *deviceinfo);
        void (*cleanup) (void);
 
        /* Device-specific */
-       int (*open) (int device_index);
-       void (*close) (int device_index);
+       int (*opendev) (int device_index);
+       int (*closedev) (int device_index);
        void *(*get_device_info) (int device_index, int device_info_id);
        int (*get_status) (int device_index);
        int *(*get_capabilities) (void);
@@ -329,21 +357,13 @@ struct device_plugin {
        void (*stop_acquisition) (int device_index, gpointer session_device_id);
 };
 
-struct gsource_fd {
-       GSource source;
-       GPollFD gpfd;
-       /* Not really using this */
-       GSource *timeout_source;
-};
-
-struct session {
-       /* List of struct device* */
+struct sr_session {
+       /* List of struct sr_device* */
        GSList *devices;
-       /* List of struct analyzer* */
-       GSList *analyzers;
-       /* Datafeed callbacks */
+       /* list of sr_receive_data_callback */
        GSList *datafeed_callbacks;
        GTimeVal starttime;
+       gboolean running;
 };
 
 #include "sigrok-proto.h"