/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
- * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
extern "C" {
#endif
-/*
- * Status/error codes returned by libsigrok functions.
+/**
+ * @file
+ *
+ * The public libsigrok header file to be used by frontends.
+ *
+ * This is the only file that libsigrok users (frontends) are supposed to
+ * use and \#include. There are other header files which get installed with
+ * libsigrok, but those are not meant to be used directly by frontends.
*
+ * The correct way to get/use the libsigrok API functions is:
+ *
+ * @code{.c}
+ * #include <libsigrok/libsigrok.h>
+ * @endcode
+ */
+
+/*
* All possible return codes of libsigrok functions must be listed here.
* Functions should never return hardcoded numbers as status, but rather
- * use these #defines instead. All error codes are negative numbers.
+ * use these enum values. All error codes are negative numbers.
*
* The error codes are globally unique in libsigrok, i.e. if one of the
* libsigrok functions returns a "malloc error" it must be exactly the same
* same return code.
*
* Also, for compatibility reasons, no defined return codes are ever removed
- * or reused for different #defines later. You can only add new #defines and
+ * or reused for different errors later. You can only add new entries and
* return codes, but never remove or redefine existing ones.
*/
-#define SR_OK 0 /* No error */
-#define SR_ERR -1 /* Generic/unspecified error */
-#define SR_ERR_MALLOC -2 /* Malloc/calloc/realloc error */
-#define SR_ERR_ARG -3 /* Function argument error */
-#define SR_ERR_BUG -4 /* Errors hinting at internal bugs */
-#define SR_ERR_SAMPLERATE -5 /* Incorrect samplerate */
-
-#define SR_MAX_NUM_PROBES 64 /* Limited by uint64_t. */
+
+/** Status/error codes returned by libsigrok functions. */
+enum {
+ SR_OK = 0, /**< No error. */
+ SR_ERR = -1, /**< Generic/unspecified error. */
+ SR_ERR_MALLOC = -2, /**< Malloc/calloc/realloc error. */
+ SR_ERR_ARG = -3, /**< Function argument error. */
+ SR_ERR_BUG = -4, /**< Errors hinting at internal bugs. */
+ SR_ERR_SAMPLERATE = -5, /**< Incorrect samplerate. */
+ SR_ERR_NA = -6, /**< Not applicable. */
+ SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but needs to be open. */
+ SR_ERR_TIMEOUT = -8, /**< A timeout occurred. */
+ SR_ERR_PROBE_GROUP= -9, /**< A probe group must be specified. */
+
+ /*
+ * Note: When adding entries here, don't forget to also update the
+ * sr_strerror() and sr_strerror_name() functions in error.c.
+ */
+};
+
#define SR_MAX_PROBENAME_LEN 32
/* Handy little macros */
#define SR_HZ(n) (n)
-#define SR_KHZ(n) ((n) * 1000)
-#define SR_MHZ(n) ((n) * 1000000)
-#define SR_GHZ(n) ((n) * 1000000000)
+#define SR_KHZ(n) ((n) * (uint64_t)(1000ULL))
+#define SR_MHZ(n) ((n) * (uint64_t)(1000000ULL))
+#define SR_GHZ(n) ((n) * (uint64_t)(1000000000ULL))
-#define SR_HZ_TO_NS(n) (1000000000 / (n))
+#define SR_HZ_TO_NS(n) ((uint64_t)(1000000000ULL) / (n))
-/* libsigrok loglevels. */
-#define SR_LOG_NONE 0 /**< Output no messages at all. */
-#define SR_LOG_ERR 1 /**< Output error messages. */
-#define SR_LOG_WARN 2 /**< Output warnings. */
-#define SR_LOG_INFO 3 /**< Output informational messages. */
-#define SR_LOG_DBG 4 /**< Output debug messages. */
-#define SR_LOG_SPEW 5 /**< Output very noisy debug messages. */
+/** libsigrok loglevels. */
+enum {
+ SR_LOG_NONE = 0, /**< Output no messages at all. */
+ SR_LOG_ERR = 1, /**< Output error messages. */
+ SR_LOG_WARN = 2, /**< Output warnings. */
+ SR_LOG_INFO = 3, /**< Output informational messages. */
+ SR_LOG_DBG = 4, /**< Output debug messages. */
+ SR_LOG_SPEW = 5, /**< Output very noisy debug messages. */
+};
/*
* Use SR_API to mark public API symbols, and SR_PRIV for private symbols.
typedef int (*sr_receive_data_callback_t)(int fd, int revents, void *cb_data);
-/* Data types used by hardware drivers for dev_config_set() */
+/** Data types used by sr_config_info(). */
enum {
- SR_T_UINT64,
+ SR_T_UINT64 = 10000,
SR_T_CHAR,
SR_T_BOOL,
SR_T_FLOAT,
SR_T_RATIONAL_PERIOD,
SR_T_RATIONAL_VOLT,
SR_T_KEYVALUE,
+ SR_T_UINT64_RANGE,
+ SR_T_DOUBLE_RANGE,
};
-struct sr_rational {
- /* numerator */
- uint64_t p;
- /* denominator */
- uint64_t q;
-};
-
-/* sr_datafeed_packet.type values */
+/** Value for sr_datafeed_packet.type. */
enum {
- SR_DF_HEADER,
+ SR_DF_HEADER = 10000,
SR_DF_END,
+ SR_DF_META,
SR_DF_TRIGGER,
SR_DF_LOGIC,
- SR_DF_META_LOGIC,
SR_DF_ANALOG,
- SR_DF_META_ANALOG,
SR_DF_FRAME_BEGIN,
SR_DF_FRAME_END,
};
-/* sr_datafeed_analog.mq values */
+/** Values for sr_datafeed_analog.mq. */
enum {
- SR_MQ_VOLTAGE,
+ SR_MQ_VOLTAGE = 10000,
SR_MQ_CURRENT,
SR_MQ_RESISTANCE,
SR_MQ_CAPACITANCE,
SR_MQ_CONTINUITY,
SR_MQ_PULSE_WIDTH,
SR_MQ_CONDUCTANCE,
-};
-
-/* sr_datafeed_analog.unit values */
+ /** Electrical power, usually in W, or dBm. */
+ SR_MQ_POWER,
+ /** Gain (a transistor's gain, or hFE, for example). */
+ SR_MQ_GAIN,
+ /** Logarithmic representation of sound pressure relative to a
+ * reference value. */
+ SR_MQ_SOUND_PRESSURE_LEVEL,
+ SR_MQ_CARBON_MONOXIDE,
+ SR_MQ_RELATIVE_HUMIDITY,
+ SR_MQ_TIME, /**< Time */
+};
+
+/** Values for sr_datafeed_analog.unit. */
enum {
- SR_UNIT_VOLT,
+ SR_UNIT_VOLT = 10000,
SR_UNIT_AMPERE,
SR_UNIT_OHM,
SR_UNIT_FARAD,
SR_UNIT_PERCENTAGE,
SR_UNIT_BOOLEAN,
SR_UNIT_SECOND,
+ /** Unit of conductance, the inverse of resistance. */
SR_UNIT_SIEMENS,
+ /**
+ * An absolute measurement of power, in decibels, referenced to
+ * 1 milliwatt (dBu).
+ */
+ SR_UNIT_DECIBEL_MW,
+ /** Voltage in decibel, referenced to 1 volt (dBV). */
+ SR_UNIT_DECIBEL_VOLT,
+ /**
+ * Measurements that intrinsically do not have units attached, such
+ * as ratios, gains, etc. Specifically, a transistor's gain (hFE) is
+ * a unitless quantity, for example.
+ */
+ SR_UNIT_UNITLESS,
+ /** Sound pressure level relative so 20 micropascals. */
+ SR_UNIT_DECIBEL_SPL,
+ /**
+ * Normalized (0 to 1) concentration of a substance or compound with 0
+ * representing a concentration of 0%, and 1 being 100%. This is
+ * represented as the fraction of number of particles of the substance.
+ */
+ SR_UNIT_CONCENTRATION,
+ SR_UNIT_REVOLUTIONS_PER_MINUTE,
+ SR_UNIT_VOLT_AMPERE,
+ SR_UNIT_WATT,
+ SR_UNIT_WATT_HOUR,
};
-/** sr_datafeed_analog.flags values */
+/** Values for sr_datafeed_analog.flags. */
enum {
- /** Voltage measurement is alternating current. */
+ /** Voltage measurement is alternating current (AC). */
SR_MQFLAG_AC = 0x01,
- /** Voltage measurement is direct current. */
+ /** Voltage measurement is direct current (DC). */
SR_MQFLAG_DC = 0x02,
/** This is a true RMS measurement. */
SR_MQFLAG_RMS = 0x04,
/** Value is voltage drop across a diode, or NAN. */
SR_MQFLAG_DIODE = 0x08,
- /** Device is in "hold" mode, i.e. repeating the last measurement. */
+ /** Device is in "hold" mode (repeating the last measurement). */
SR_MQFLAG_HOLD = 0x10,
- /** Device is in "max" mode, only updating when a new max value is found. */
+ /** Device is in "max" mode, only updating upon a new max value. */
SR_MQFLAG_MAX = 0x20,
- /** Device is in "min" mode, only updating when a new min value is found. */
+ /** Device is in "min" mode, only updating upon a new min value. */
SR_MQFLAG_MIN = 0x40,
/** Device is in autoranging mode. */
SR_MQFLAG_AUTORANGE = 0x80,
/** Device is in relative mode. */
SR_MQFLAG_RELATIVE = 0x100,
-};
+ /** Sound pressure level is A-weighted in the frequency domain,
+ * according to IEC 61672:2003. */
+ SR_MQFLAG_SPL_FREQ_WEIGHT_A = 0x200,
+ /** Sound pressure level is C-weighted in the frequency domain,
+ * according to IEC 61672:2003. */
+ SR_MQFLAG_SPL_FREQ_WEIGHT_C = 0x400,
+ /** Sound pressure level is Z-weighted (i.e. not at all) in the
+ * frequency domain, according to IEC 61672:2003. */
+ SR_MQFLAG_SPL_FREQ_WEIGHT_Z = 0x800,
+ /** Sound pressure level is not weighted in the frequency domain,
+ * albeit without standards-defined low and high frequency limits. */
+ SR_MQFLAG_SPL_FREQ_WEIGHT_FLAT = 0x1000,
+ /** Sound pressure level measurement is S-weighted (1s) in the
+ * time domain. */
+ SR_MQFLAG_SPL_TIME_WEIGHT_S = 0x2000,
+ /** Sound pressure level measurement is F-weighted (125ms) in the
+ * time domain. */
+ SR_MQFLAG_SPL_TIME_WEIGHT_F = 0x4000,
+ /** Sound pressure level is time-averaged (LAT), also known as
+ * Equivalent Continuous A-weighted Sound Level (LEQ). */
+ SR_MQFLAG_SPL_LAT = 0x8000,
+ /** Sound pressure level represented as a percentage of measurements
+ * that were over a preset alarm level. */
+ SR_MQFLAG_SPL_PCT_OVER_ALARM = 0x10000,
+ /** Time is duration (as opposed to epoch, ...). */
+ SR_MQFLAG_DURATION = 0x20000,
+};
+
+struct sr_context;
struct sr_datafeed_packet {
uint16_t type;
- void *payload;
+ const void *payload;
};
struct sr_datafeed_header {
struct timeval starttime;
};
-struct sr_datafeed_meta_logic {
- int num_probes;
- uint64_t samplerate;
+struct sr_datafeed_meta {
+ GSList *config;
};
struct sr_datafeed_logic {
void *data;
};
-struct sr_datafeed_meta_analog {
- int num_probes;
-};
-
struct sr_datafeed_analog {
+ /** The probes for which data is included in this packet. */
+ GSList *probes;
int num_samples;
- /** Measured quantity (e.g. voltage, current, temperature) */
+ /** Measured quantity (voltage, current, temperature, and so on). */
int mq;
/** Unit in which the MQ is measured. */
int unit;
/** Bitmap with extra information about the MQ. */
uint64_t mqflags;
+ /** The analog value(s). The data is interleaved according to
+ * the probes list. */
float *data;
};
+/** Input (file) format struct. */
struct sr_input {
+ /**
+ * A pointer to this input format's 'struct sr_input_format'.
+ * The frontend can use this to call the module's callbacks.
+ */
struct sr_input_format *format;
+
GHashTable *param;
+
struct sr_dev_inst *sdi;
+
void *internal;
};
struct sr_input_format {
+ /** The unique ID for this input format. Must not be NULL. */
char *id;
+
+ /**
+ * A short description of the input format, which can (for example)
+ * be displayed to the user by frontends. Must not be NULL.
+ */
char *description;
+
+ /**
+ * Check if this input module can load and parse the specified file.
+ *
+ * @param filename The name (and path) of the file to check.
+ *
+ * @return TRUE if this module knows the format, FALSE if it doesn't.
+ */
int (*format_match) (const char *filename);
- int (*init) (struct sr_input *in);
+
+ /**
+ * Initialize the input module.
+ *
+ * @param in A pointer to a valid 'struct sr_input' that the caller
+ * has to allocate and provide to this function. It is also
+ * the responsibility of the caller to free it later.
+ * @param filename The name (and path) of the file to use.
+ *
+ * @return SR_OK upon success, a negative error code upon failure.
+ */
+ int (*init) (struct sr_input *in, const char *filename);
+
+ /**
+ * Load a file, parsing the input according to the file's format.
+ *
+ * This function will send datafeed packets to the session bus, so
+ * the calling frontend must have registered its session callbacks
+ * beforehand.
+ *
+ * The packet types sent across the session bus by this function must
+ * include at least SR_DF_HEADER, SR_DF_END, and an appropriate data
+ * type such as SR_DF_LOGIC. It may also send a SR_DF_TRIGGER packet
+ * if appropriate.
+ *
+ * @param in A pointer to a valid 'struct sr_input' that the caller
+ * has to allocate and provide to this function. It is also
+ * the responsibility of the caller to free it later.
+ * @param filename The name (and path) of the file to use.
+ *
+ * @return SR_OK upon success, a negative error code upon failure.
+ */
int (*loadfile) (struct sr_input *in, const char *filename);
};
+/** Output (file) format struct. */
struct sr_output {
+ /**
+ * A pointer to this output format's 'struct sr_output_format'.
+ * The frontend can use this to call the module's callbacks.
+ */
struct sr_output_format *format;
+
+ /**
+ * The device for which this output module is creating output. This
+ * can be used by the module to find out probe names and numbers.
+ */
struct sr_dev_inst *sdi;
+
+ /**
+ * An optional parameter which the frontend can pass in to the
+ * output module. How the string is interpreted is entirely up to
+ * the module.
+ */
char *param;
+
+ /**
+ * A generic pointer which can be used by the module to keep internal
+ * state between calls into its callback functions.
+ *
+ * For example, the module might store a pointer to a chunk of output
+ * there, and only flush it when it reaches a certain size.
+ */
void *internal;
};
struct sr_output_format {
+ /**
+ * A unique ID for this output format. Must not be NULL.
+ *
+ * It can be used by frontends to select this output format for use.
+ *
+ * For example, calling sigrok-cli with <code>-O hex</code> will
+ * select the hexadecimal text output format.
+ */
char *id;
+
+ /**
+ * A short description of the output format. Must not be NULL.
+ *
+ * This can be displayed by frontends, e.g. when selecting the output
+ * format for saving a file.
+ */
char *description;
+
int df_type;
+
+ /**
+ * This function is called once, at the beginning of an output stream.
+ *
+ * The device struct will be available in the output struct passed in,
+ * as well as the param field -- which may be NULL or an empty string,
+ * if no parameter was passed.
+ *
+ * The module can use this to initialize itself, create a struct for
+ * keeping state and storing it in the <code>internal</code> field.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*init) (struct sr_output *o);
+
+ /**
+ * Whenever a chunk of data comes in, it will be passed to the
+ * output module via this function. The <code>data_in</code> and
+ * <code>length_in</code> values refers to this data; the module
+ * must not alter or g_free() this buffer.
+ *
+ * The function must allocate a buffer for storing its output, and
+ * pass along a pointer to this buffer in the <code>data_out</code>
+ * parameter, as well as storing the length of the buffer in
+ * <code>length_out</code>. The calling frontend will g_free()
+ * this buffer when it's done with it.
+ *
+ * IMPORTANT: The memory allocation much happen using a glib memory
+ * allocation call (not a "normal" malloc) since g_free() will be
+ * used to free the memory!
+ *
+ * If there is no output, this function MUST store NULL in the
+ * <code>data_out</code> parameter, so the caller knows not to try
+ * and g_free() it.
+ *
+ * Note: This API call is obsolete, use receive() instead.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ * @param data_in Pointer to the input data buffer.
+ * @param length_in Length of the input.
+ * @param data_out Pointer to the allocated output buffer.
+ * @param length_out Length (in bytes) of the output.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*data) (struct sr_output *o, const uint8_t *data_in,
uint64_t length_in, uint8_t **data_out,
uint64_t *length_out);
+
+ /**
+ * This function is called when an event occurs in the datafeed
+ * which the output module may need to be aware of. No data is
+ * passed in, only the fact that the event occurs. The following
+ * events can currently be passed in:
+ *
+ * - SR_DF_TRIGGER: At this point in the datafeed, the trigger
+ * matched. The output module may mark this in some way, e.g. by
+ * plotting a red line on a graph.
+ *
+ * - SR_DF_END: This marks the end of the datafeed. No more calls
+ * into the output module will be done, so this is a good time to
+ * free up any memory used to keep state, for example.
+ *
+ * Any output generated by this function must have a reference to
+ * it stored in the <code>data_out</code> and <code>length_out</code>
+ * parameters, or NULL if no output was generated.
+ *
+ * Note: This API call is obsolete, use receive() instead.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ * @param event_type Type of event that occured.
+ * @param data_out Pointer to the allocated output buffer.
+ * @param length_out Length (in bytes) of the output.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*event) (struct sr_output *o, int event_type, uint8_t **data_out,
- uint64_t *length_out);
- GString *(*recv) (struct sr_output *o, const struct sr_dev_inst *sdi,
- struct sr_datafeed_packet *packet);
- int (*cleanup) (struct sr_output *o);
-};
+ uint64_t *length_out);
-struct sr_datastore {
- /* Size in bytes of the number of units stored in this datastore */
- int ds_unitsize;
- unsigned int num_units; /* TODO: uint64_t */
- GSList *chunklist;
-};
+ /**
+ * This function is passed a copy of every packed in the data feed.
+ * Any output generated by the output module in response to the
+ * packet should be returned in a newly allocated GString
+ * <code>out</code>, which will be freed by the caller.
+ *
+ * Packets not of interest to the output module can just be ignored,
+ * and the <code>out</code> parameter set to NULL.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ * @param sdi The device instance that generated the packet.
+ * @param packet The complete packet.
+ * @param out A pointer where a GString * should be stored if
+ * the module generates output, or NULL if not.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
+ int (*receive) (struct sr_output *o, const struct sr_dev_inst *sdi,
+ const struct sr_datafeed_packet *packet, GString **out);
-/*
- * This represents a generic device connected to the system.
- * For device-specific information, ask the driver. The driver_index refers
- * to the device index within that driver; it may be handling more than one
- * device. All relevant driver calls take a dev_index parameter for this.
- */
-struct sr_dev {
- /* Which driver handles this device */
- struct sr_dev_driver *driver;
- /* A driver may handle multiple devices of the same type */
- int driver_index;
- /* List of struct sr_probe* */
- GSList *probes;
- /* Data acquired by this device, if any */
- struct sr_datastore *datastore;
+ /**
+ * This function is called after the caller is finished using
+ * the output module, and can be used to free any internal
+ * resources the module may keep.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
+ int (*cleanup) (struct sr_output *o);
};
enum {
- SR_PROBE_LOGIC,
+ SR_PROBE_LOGIC = 10000,
SR_PROBE_ANALOG,
};
struct sr_probe {
+ /* The index field will go: use g_slist_length(sdi->probes) instead. */
int index;
int type;
gboolean enabled;
char *trigger;
};
-struct sr_hwopt {
- int hwopt;
- const void *value;
+/** Structure for groups of probes that have common properties. */
+struct sr_probe_group {
+ /** Name of the probe group. */
+ char *name;
+ /** List of sr_probe structs of the probes belonging to this group. */
+ GSList *probes;
+ /** Private data for driver use. */
+ void *priv;
};
-/* Hardware driver options */
-enum {
- SR_HWOPT_DUMMY = 0, /* Used to terminate lists. Must be 0! */
-
- /** Some drivers cannot detect the exact model they're talking to. */
- SR_HWOPT_MODEL,
-
- /** Specification on how to connect to a device */
- SR_HWOPT_CONN,
+struct sr_config {
+ int key;
+ GVariant *data;
+};
- /** Serial communication spec: <data bits><parity><stop bit> e.g. 8n1 */
- SR_HWOPT_SERIALCOMM,
+struct sr_config_info {
+ int key;
+ int datatype;
+ char *id;
+ char *name;
+ char *description;
};
-/* Hardware device capabilities */
enum {
- SR_HWCAP_DUMMY = 0, /* Used to terminate lists. Must be 0! */
-
/*--- Device classes ------------------------------------------------*/
/** The device can act as logic analyzer. */
- SR_HWCAP_LOGIC_ANALYZER,
+ SR_CONF_LOGIC_ANALYZER = 10000,
/** The device can act as an oscilloscope. */
- SR_HWCAP_OSCILLOSCOPE,
+ SR_CONF_OSCILLOSCOPE,
/** The device can act as a multimeter. */
- SR_HWCAP_MULTIMETER,
+ SR_CONF_MULTIMETER,
/** The device is a demo device. */
- SR_HWCAP_DEMO_DEV,
+ SR_CONF_DEMO_DEV,
+
+ /** The device can act as a sound level meter. */
+ SR_CONF_SOUNDLEVELMETER,
+
+ /** The device can measure temperature. */
+ SR_CONF_THERMOMETER,
+
+ /** The device can measure humidity. */
+ SR_CONF_HYGROMETER,
+
+ /** The device can measure energy consumption. */
+ SR_CONF_ENERGYMETER,
+ /*--- Driver scan options -------------------------------------------*/
+
+ /**
+ * Specification on how to connect to a device.
+ *
+ * In combination with SR_CONF_SERIALCOMM, this is a serial port in
+ * the form which makes sense to the OS (e.g., /dev/ttyS0).
+ * Otherwise this specifies a USB device, either in the form of
+ * @verbatim <bus>.<address> @endverbatim (decimal, e.g. 1.65) or
+ * @verbatim <vendorid>.<productid> @endverbatim
+ * (hexadecimal, e.g. 1d6b.0001).
+ */
+ SR_CONF_CONN = 20000,
+
+ /**
+ * Serial communication specification, in the form:
+ *
+ * @verbatim <baudrate>/<databits><parity><stopbits> @endverbatim
+ *
+ * Example: 9600/8n1
+ *
+ * The string may also be followed by one or more special settings,
+ * in the form "/key=value". Supported keys and their values are:
+ *
+ * rts 0,1 set the port's RTS pin to low or high
+ * dtr 0,1 set the port's DTR pin to low or high
+ * flow 0 no flow control
+ * 1 hardware-based (RTS/CTS) flow control
+ * 2 software-based (XON/XOFF) flow control
+ *
+ * This is always an optional parameter, since a driver typically
+ * knows the speed at which the device wants to communicate.
+ */
+ SR_CONF_SERIALCOMM,
/*--- Device configuration ------------------------------------------*/
- /** The device supports setting/changing its samplerate. */
- SR_HWCAP_SAMPLERATE,
+ /** The device supports setting its samplerate, in Hz. */
+ SR_CONF_SAMPLERATE = 30000,
/** The device supports setting a pre/post-trigger capture ratio. */
- SR_HWCAP_CAPTURE_RATIO,
+ SR_CONF_CAPTURE_RATIO,
- /* TODO? */
/** The device supports setting a pattern (pattern generator mode). */
- SR_HWCAP_PATTERN_MODE,
+ SR_CONF_PATTERN_MODE,
/** The device supports Run Length Encoding. */
- SR_HWCAP_RLE,
+ SR_CONF_RLE,
/** The device supports setting trigger slope. */
- SR_HWCAP_TRIGGER_SLOPE,
+ SR_CONF_TRIGGER_SLOPE,
/** Trigger source. */
- SR_HWCAP_TRIGGER_SOURCE,
+ SR_CONF_TRIGGER_SOURCE,
- /** Horizontal trigger position */
- SR_HWCAP_HORIZ_TRIGGERPOS,
+ /** Horizontal trigger position. */
+ SR_CONF_HORIZ_TRIGGERPOS,
/** Buffer size. */
- SR_HWCAP_BUFFERSIZE,
+ SR_CONF_BUFFERSIZE,
/** Time base. */
- SR_HWCAP_TIMEBASE,
+ SR_CONF_TIMEBASE,
/** Filter. */
- SR_HWCAP_FILTER,
+ SR_CONF_FILTER,
/** Volts/div. */
- SR_HWCAP_VDIV,
+ SR_CONF_VDIV,
/** Coupling. */
- SR_HWCAP_COUPLING,
+ SR_CONF_COUPLING,
+
+ /** Trigger types. */
+ SR_CONF_TRIGGER_TYPE,
+
+ /** The device supports setting its sample interval, in ms. */
+ SR_CONF_SAMPLE_INTERVAL,
+ /** Number of timebases, as related to SR_CONF_TIMEBASE. */
+ SR_CONF_NUM_TIMEBASE,
+
+ /** Number of vertical divisions, as related to SR_CONF_VDIV. */
+ SR_CONF_NUM_VDIV,
+
+ /** Sound pressure level frequency weighting. */
+ SR_CONF_SPL_WEIGHT_FREQ,
+
+ /** Sound pressure level time weighting. */
+ SR_CONF_SPL_WEIGHT_TIME,
+
+ /** Sound pressure level measurement range. */
+ SR_CONF_SPL_MEASUREMENT_RANGE,
+
+ /** Max hold mode. */
+ SR_CONF_HOLD_MAX,
+
+ /** Min hold mode. */
+ SR_CONF_HOLD_MIN,
+
+ /** Logic low-high threshold range. */
+ SR_CONF_VOLTAGE_THRESHOLD,
+
+ /** The device supports using a external clock. */
+ SR_CONF_EXTERNAL_CLOCK,
+
+ /**
+ * The device supports swapping channels. Typical this is between
+ * buffered and unbuffered channels.
+ */
+ SR_CONF_SWAP,
/*--- Special stuff -------------------------------------------------*/
- /** Session filename */
- SR_HWCAP_SESSIONFILE,
+ /** Scan options supported by the driver. */
+ SR_CONF_SCAN_OPTIONS = 40000,
+
+ /** Device options for a particular device. */
+ SR_CONF_DEVICE_OPTIONS,
+
+ /** Session filename. */
+ SR_CONF_SESSIONFILE,
- /* TODO: Better description. */
/** The device supports specifying a capturefile to inject. */
- SR_HWCAP_CAPTUREFILE,
+ SR_CONF_CAPTUREFILE,
- /* TODO: Better description. */
/** The device supports specifying the capturefile unit size. */
- SR_HWCAP_CAPTURE_UNITSIZE,
+ SR_CONF_CAPTURE_UNITSIZE,
- /* TODO: Better description. */
/** The device supports setting the number of probes. */
- SR_HWCAP_CAPTURE_NUM_PROBES,
-
+ SR_CONF_CAPTURE_NUM_PROBES,
+
+ /** Power off the device. */
+ SR_CONF_POWER_OFF,
+
+ /** Data source for acquisition. If not present, acquisition from
+ * the device is always "live", i.e. acquisition starts when the
+ * frontend asks and the results are sent out as soon as possible.
+ *
+ * If present, it indicates that either the device has no live
+ * acquisition capability (for example a pure data logger), or
+ * there is a choice. sr_config_list() returns those choices.
+ *
+ * In any case if a device has live acquisition capabilities, it
+ * is always the default. */
+ SR_CONF_DATA_SOURCE,
/*--- Acquisition modes ---------------------------------------------*/
/**
- * The device supports setting a sample time limit, i.e. how long the
- * sample acquisition should run (in ms).
+ * The device supports setting a sample time limit (how long
+ * the sample acquisition should run, in ms).
*/
- SR_HWCAP_LIMIT_MSEC,
+ SR_CONF_LIMIT_MSEC = 50000,
/**
- * The device supports setting a sample number limit, i.e. how many
- * samples should be acquired.
+ * The device supports setting a sample number limit (how many
+ * samples should be acquired).
*/
- SR_HWCAP_LIMIT_SAMPLES,
+ SR_CONF_LIMIT_SAMPLES,
/**
- * The device supports setting a frame limit, i.e. how many
- * frames should be acquired.
+ * The device supports setting a frame limit (how many
+ * frames should be acquired).
*/
- SR_HWCAP_LIMIT_FRAMES,
+ SR_CONF_LIMIT_FRAMES,
/**
- * The device supports continuous sampling, i.e. neither a time limit
+ * The device supports continuous sampling. Neither a time limit
* nor a sample number limit has to be supplied, it will just acquire
* samples continuously, until explicitly stopped by a certain command.
*/
- SR_HWCAP_CONTINUOUS,
+ SR_CONF_CONTINUOUS,
-};
-
-struct sr_hwcap_option {
- int hwcap;
- int type;
- char *description;
- char *shortname;
+ /** The device has internal storage, into which data is logged. This
+ * starts or stops the internal logging. */
+ SR_CONF_DATALOG,
};
struct sr_dev_inst {
char *model;
char *version;
GSList *probes;
+ /* List of sr_probe_group structs */
+ GSList *probe_groups;
+ void *conn;
void *priv;
};
-/* sr_dev_inst types */
+/** Types of device instances (sr_dev_inst). */
enum {
/** Device instance type for USB devices. */
- SR_INST_USB,
+ SR_INST_USB = 10000,
/** Device instance type for serial port devices. */
SR_INST_SERIAL,
+ /** Device instance type for USBTMC devices. */
+ SR_INST_USBTMC,
};
-/* Device instance status */
+/** Device instance status. */
enum {
- SR_ST_NOT_FOUND,
- /* Found, but still booting */
+ /** The device instance was not found. */
+ SR_ST_NOT_FOUND = 10000,
+ /** The device instance was found, but is still booting. */
SR_ST_INITIALIZING,
- /* Live, but not in use */
+ /** The device instance is live, but not in use. */
SR_ST_INACTIVE,
- /* Actively in use in a session */
+ /** The device instance is actively in use in a session. */
SR_ST_ACTIVE,
-};
-
-/*
- * TODO: This sucks, you just kinda have to "know" the returned type.
- * TODO: Need a DI to return the number of trigger stages supported.
- */
-
-/* Device info IDs */
-enum {
- /* A list of options supported by the driver. */
- SR_DI_HWOPTS,
- /* A list of capabilities supported by the device. */
- SR_DI_HWCAPS,
- /* The number of probes connected to this device */
- SR_DI_NUM_PROBES,
- /* The probe names on this device */
- SR_DI_PROBE_NAMES,
- /* Samplerates supported by this device, (struct sr_samplerates) */
- SR_DI_SAMPLERATES,
- /* Types of logic trigger supported, out of "01crf" (char *) */
- SR_DI_TRIGGER_TYPES,
- /* The currently set samplerate in Hz (uint64_t) */
- SR_DI_CUR_SAMPLERATE,
- /* Supported patterns (in pattern generator mode) */
- SR_DI_PATTERNS,
- /* Supported buffer sizes */
- SR_DI_BUFFERSIZES,
- /* Supported time bases */
- SR_DI_TIMEBASES,
- /* Supported trigger sources */
- SR_DI_TRIGGER_SOURCES,
- /* Supported filter targets */
- SR_DI_FILTERS,
- /* Valid volts/div values */
- SR_DI_VDIVS,
- /* Coupling options */
- SR_DI_COUPLING,
-};
-
-/*
- * A device supports either a range of samplerates with steps of a given
- * granularity, or is limited to a set of defined samplerates. Use either
- * step or list, but not both.
- */
-struct sr_samplerates {
- uint64_t low;
- uint64_t high;
- uint64_t step;
- const uint64_t *list;
+ /** The device is winding down its session. */
+ SR_ST_STOPPING,
};
struct sr_dev_driver {
char *name;
char *longname;
int api_version;
- int (*init) (void);
+ int (*init) (struct sr_context *sr_ctx);
int (*cleanup) (void);
GSList *(*scan) (GSList *options);
GSList *(*dev_list) (void);
int (*dev_clear) (void);
+ int (*config_get) (int id, GVariant **data,
+ const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group);
+ int (*config_set) (int id, GVariant *data,
+ const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group);
+ int (*config_list) (int info_id, GVariant **data,
+ const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group);
/* Device-specific */
int (*dev_open) (struct sr_dev_inst *sdi);
int (*dev_close) (struct sr_dev_inst *sdi);
- int (*info_get) (int info_id, const void **data,
- const struct sr_dev_inst *sdi);
- int (*dev_config_set) (const struct sr_dev_inst *sdi, int hwcap,
- const void *value);
int (*dev_acquisition_start) (const struct sr_dev_inst *sdi,
void *cb_data);
- int (*dev_acquisition_stop) (const struct sr_dev_inst *sdi,
+ int (*dev_acquisition_stop) (struct sr_dev_inst *sdi,
void *cb_data);
/* Dynamic */
void *priv;
};
-/* Private driver context. */
-struct drv_context {
- GSList *instances;
-};
-
-struct sr_session {
- /* List of struct sr_dev* */
- GSList *devs;
- /* list of sr_receive_data_callback_t */
- GSList *datafeed_callbacks;
- GTimeVal starttime;
-
- unsigned int num_sources;
-
- /* Both "sources" and "pollfds" are of the same size and contain pairs of
- * descriptor and callback function. We can not embed the GPollFD into the
- * source struct since we want to be able to pass the array of all poll
- * descriptors to g_poll.
- */
- struct source *sources;
- GPollFD *pollfds;
- int source_timeout;
-};
+/**
+ * Opaque data structure representing a libsigrok session. None of the fields
+ * of this structure are meant to be accessed directly.
+ */
+struct sr_session;
#include "proto.h"
#include "version.h"
projects / libsigrok.git / blobdiff