#ifdef HAVE_HW_DEMO
extern SR_PRIV struct sr_dev_driver demo_driver_info;
#endif
+#ifdef HAVE_HW_GMC_MH_1X_2X
+extern SR_PRIV struct sr_dev_driver gmc_mh_1x_2x_rs232_driver_info;
+#endif
#ifdef HAVE_HW_IKALOGIC_SCANALOGIC2
extern SR_PRIV struct sr_dev_driver ikalogic_scanalogic2_driver_info;
#endif
extern SR_PRIV struct sr_dev_driver mic_98581_driver_info;
extern SR_PRIV struct sr_dev_driver mic_98583_driver_info;
#endif
+#ifdef HAVE_HW_NORMA_DMM
+extern SR_PRIV struct sr_dev_driver norma_dmm_driver_info;
+#endif
#ifdef HAVE_HW_OLS
extern SR_PRIV struct sr_dev_driver ols_driver_info;
#endif
-#ifdef HAVE_HW_RIGOL_DS1XX2
-extern SR_PRIV struct sr_dev_driver rigol_ds1xx2_driver_info;
+#ifdef HAVE_HW_RIGOL_DS
+extern SR_PRIV struct sr_dev_driver rigol_ds_driver_info;
#endif
#ifdef HAVE_HW_SALEAE_LOGIC16
extern SR_PRIV struct sr_dev_driver saleae_logic16_driver_info;
extern SR_PRIV struct sr_dev_driver mastech_mas345_driver_info;
extern SR_PRIV struct sr_dev_driver va_va18b_driver_info;
extern SR_PRIV struct sr_dev_driver metex_m3640d_driver_info;
+extern SR_PRIV struct sr_dev_driver metex_m4650cr_driver_info;
extern SR_PRIV struct sr_dev_driver peaktech_4370_driver_info;
extern SR_PRIV struct sr_dev_driver pce_pce_dm32_driver_info;
extern SR_PRIV struct sr_dev_driver radioshack_22_168_driver_info;
extern SR_PRIV struct sr_dev_driver radioshack_22_812_driver_info;
extern SR_PRIV struct sr_dev_driver tecpel_dmm_8061_ser_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_m3650d_driver_info;
+extern SR_PRIV struct sr_dev_driver voltcraft_m4650cr_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc820_ser_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc830_ser_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc840_ser_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc820_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc830_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc840_driver_info;
+extern SR_PRIV struct sr_dev_driver tenma_72_7745_driver_info;
#endif
/** @endcond */
#ifdef HAVE_HW_DEMO
&demo_driver_info,
#endif
+#ifdef HAVE_HW_GMC_MH_1X_2X
+ &gmc_mh_1x_2x_rs232_driver_info,
+#endif
#ifdef HAVE_HW_IKALOGIC_SCANALOGIC2
&ikalogic_scanalogic2_driver_info,
#endif
&mic_98581_driver_info,
&mic_98583_driver_info,
#endif
+#ifdef HAVE_HW_NORMA_DMM
+ &norma_dmm_driver_info,
+#endif
#ifdef HAVE_HW_OLS
&ols_driver_info,
#endif
-#ifdef HAVE_HW_RIGOL_DS1XX2
- &rigol_ds1xx2_driver_info,
+#ifdef HAVE_HW_RIGOL_DS
+ &rigol_ds_driver_info,
#endif
#ifdef HAVE_HW_SALEAE_LOGIC16
&saleae_logic16_driver_info,
&mastech_mas345_driver_info,
&va_va18b_driver_info,
&metex_m3640d_driver_info,
+ &metex_m4650cr_driver_info,
&peaktech_4370_driver_info,
&pce_pce_dm32_driver_info,
&radioshack_22_168_driver_info,
&radioshack_22_812_driver_info,
&tecpel_dmm_8061_ser_driver_info,
&voltcraft_m3650d_driver_info,
+ &voltcraft_m4650cr_driver_info,
&voltcraft_vc820_ser_driver_info,
&voltcraft_vc830_ser_driver_info,
&voltcraft_vc840_ser_driver_info,
&voltcraft_vc820_driver_info,
&voltcraft_vc830_driver_info,
&voltcraft_vc840_driver_info,
+ &tenma_72_7745_driver_info,
#endif
NULL,
};
* Returns information about the given driver or device instance.
*
* @param driver The sr_dev_driver struct to query.
+ * @param sdi (optional) If the key is specific to a device, this must
+ * contain a pointer to the struct sr_dev_inst to be checked.
+ * Otherwise it must be NULL.
+ * @param probe_group The probe group on the device for which to list the
+ * values, or NULL.
* @param key The configuration key (SR_CONF_*).
* @param data Pointer to a GVariant where the value will be stored. Must
* not be NULL. The caller is given ownership of the GVariant
* and must thus decrease the refcount after use. However if
* this function returns an error code, the field should be
* considered unused, and should not be unreferenced.
- * @param sdi (optional) If the key is specific to a device, this must
- * contain a pointer to the struct sr_dev_inst to be checked.
- * Otherwise it must be NULL.
*
* @return SR_OK upon success or SR_ERR in case of error. Note SR_ERR_ARG
* may be returned by the driver indicating it doesn't know that key,
* but this is not to be flagged as an error by the caller; merely
* as an indication that it's not applicable.
*/
-SR_API int sr_config_get(const struct sr_dev_driver *driver, int key,
- GVariant **data, const struct sr_dev_inst *sdi)
+SR_API int sr_config_get(const struct sr_dev_driver *driver,
+ const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group,
+ int key, GVariant **data)
{
int ret;
if (!driver->config_get)
return SR_ERR_ARG;
- if ((ret = driver->config_get(key, data, sdi)) == SR_OK) {
+ if ((ret = driver->config_get(key, data, sdi, probe_group)) == SR_OK) {
/* Got a floating reference from the driver. Sink it here,
* caller will need to unref when done with it. */
g_variant_ref_sink(*data);
* Set a configuration key in a device instance.
*
* @param sdi The device instance.
+ * @param probe_group The probe group on the device for which to list the
+ * values, or NULL.
* @param key The configuration key (SR_CONF_*).
* @param data The new value for the key, as a GVariant with GVariantType
* appropriate to that key. A floating reference can be passed
* but this is not to be flagged as an error by the caller; merely
* as an indication that it's not applicable.
*/
-SR_API int sr_config_set(const struct sr_dev_inst *sdi, int key, GVariant *data)
+SR_API int sr_config_set(const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group,
+ int key, GVariant *data)
{
int ret;
else if (!sdi->driver->config_set)
ret = SR_ERR_ARG;
else
- ret = sdi->driver->config_set(key, data, sdi);
+ ret = sdi->driver->config_set(key, data, sdi, probe_group);
g_variant_unref(data);
* List all possible values for a configuration key.
*
* @param driver The sr_dev_driver struct to query.
+ * @param sdi (optional) If the key is specific to a device, this must
+ * contain a pointer to the struct sr_dev_inst to be checked.
+ * @param probe_group The probe group on the device for which to list the
+ * values, or NULL.
* @param key The configuration key (SR_CONF_*).
* @param data A pointer to a GVariant where the list will be stored. The
* caller is given ownership of the GVariant and must thus
* unref the GVariant after use. However if this function
* returns an error code, the field should be considered
* unused, and should not be unreferenced.
- * @param sdi (optional) If the key is specific to a device, this must
- * contain a pointer to the struct sr_dev_inst to be checked.
*
* @return SR_OK upon success or SR_ERR in case of error. Note SR_ERR_ARG
* may be returned by the driver indicating it doesn't know that key,
* but this is not to be flagged as an error by the caller; merely
* as an indication that it's not applicable.
*/
-SR_API int sr_config_list(const struct sr_dev_driver *driver, int key,
- GVariant **data, const struct sr_dev_inst *sdi)
+SR_API int sr_config_list(const struct sr_dev_driver *driver,
+ const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group,
+ int key, GVariant **data)
{
int ret;
ret = SR_ERR;
else if (!driver->config_list)
ret = SR_ERR_ARG;
- else if ((ret = driver->config_list(key, data, sdi)) == SR_OK)
+ else if ((ret = driver->config_list(key, data, sdi, probe_group)) == SR_OK)
g_variant_ref_sink(*data);
return ret;
projects / libsigrok.git / blobdiff