"Swap channel order", NULL},
{SR_CONF_RLE, SR_T_BOOL, "rle",
"Run Length Encoding", NULL},
- {SR_CONF_TRIGGER_SLOPE, SR_T_UINT64, "triggerslope",
+ {SR_CONF_TRIGGER_SLOPE, SR_T_CHAR, "triggerslope",
"Trigger slope", NULL},
{SR_CONF_TRIGGER_SOURCE, SR_T_CHAR, "triggersource",
"Trigger source", NULL},
"Power off", NULL},
{SR_CONF_DATA_SOURCE, SR_T_CHAR, "data_source",
"Data source", NULL},
- {SR_CONF_NUM_LOGIC_PROBES, SR_T_INT32, "logic_probes",
- "Number of logic probes", NULL},
- {SR_CONF_NUM_ANALOG_PROBES, SR_T_INT32, "analog_probes",
- "Number of analog probes", NULL},
+ {SR_CONF_NUM_LOGIC_CHANNELS, SR_T_INT32, "logic_channels",
+ "Number of logic channels", NULL},
+ {SR_CONF_NUM_ANALOG_CHANNELS, SR_T_INT32, "analog_channels",
+ "Number of analog channels", NULL},
{SR_CONF_OUTPUT_VOLTAGE, SR_T_FLOAT, "output_voltage",
"Current output voltage", NULL},
{SR_CONF_OUTPUT_VOLTAGE_MAX, SR_T_FLOAT, "output_voltage_max",
"Over-current protection", NULL},
{SR_CONF_LIMIT_SAMPLES, SR_T_UINT64, "limit_samples",
"Sample limit", NULL},
+ {SR_CONF_CLOCK_EDGE, SR_T_CHAR, "clock_edge",
+ "Clock edge", NULL},
{0, 0, NULL, NULL, NULL},
};
#ifdef HAVE_HW_ATTEN_PPS3XXX
extern SR_PRIV struct sr_dev_driver atten_pps3203_driver_info;
#endif
+#ifdef HAVE_HW_BRYMEN_BM86X
+extern SR_PRIV struct sr_dev_driver brymen_bm86x_driver_info;
+#endif
#ifdef HAVE_HW_BRYMEN_DMM
extern SR_PRIV struct sr_dev_driver brymen_bm857_driver_info;
#endif
#ifdef HAVE_HW_COLEAD_SLM
extern SR_PRIV struct sr_dev_driver colead_slm_driver_info;
#endif
+#ifdef HAVE_HW_CONRAD_DIGI_35_CPU
+extern SR_PRIV struct sr_dev_driver conrad_digi_35_cpu_driver_info;
+#endif
#ifdef HAVE_HW_DEMO
extern SR_PRIV struct sr_dev_driver demo_driver_info;
#endif
#ifdef HAVE_HW_GMC_MH_1X_2X
extern SR_PRIV struct sr_dev_driver gmc_mh_1x_2x_rs232_driver_info;
+extern SR_PRIV struct sr_dev_driver gmc_mh_2x_bd232_driver_info;
#endif
#ifdef HAVE_HW_HAMEG_HMO
extern SR_PRIV struct sr_dev_driver hameg_hmo_driver_info;
extern SR_PRIV struct sr_dev_driver radioshack_22_805_driver_info;
extern SR_PRIV struct sr_dev_driver radioshack_22_812_driver_info;
extern SR_PRIV struct sr_dev_driver tecpel_dmm_8061_ser_driver_info;
+extern SR_PRIV struct sr_dev_driver voltcraft_m3650cr_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_m3650d_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_m4650cr_driver_info;
+extern SR_PRIV struct sr_dev_driver voltcraft_me42_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc820_ser_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc830_ser_driver_info;
extern SR_PRIV struct sr_dev_driver voltcraft_vc840_ser_driver_info;
#ifdef HAVE_HW_ATTEN_PPS3XXX
&atten_pps3203_driver_info,
#endif
+#ifdef HAVE_HW_BRYMEN_BM86X
+ &brymen_bm86x_driver_info,
+#endif
#ifdef HAVE_HW_BRYMEN_DMM
&brymen_bm857_driver_info,
#endif
#ifdef HAVE_HW_COLEAD_SLM
&colead_slm_driver_info,
#endif
+#ifdef HAVE_HW_CONRAD_DIGI_35_CPU
+ &conrad_digi_35_cpu_driver_info,
+#endif
#ifdef HAVE_HW_DEMO
&demo_driver_info,
#endif
#ifdef HAVE_HW_GMC_MH_1X_2X
&gmc_mh_1x_2x_rs232_driver_info,
+ &gmc_mh_2x_bd232_driver_info,
#endif
#ifdef HAVE_HW_HAMEG_HMO
&hameg_hmo_driver_info,
&radioshack_22_805_driver_info,
&radioshack_22_812_driver_info,
&tecpel_dmm_8061_ser_driver_info,
+ &voltcraft_m3650cr_driver_info,
&voltcraft_m3650d_driver_info,
&voltcraft_m4650cr_driver_info,
+ &voltcraft_me42_driver_info,
&voltcraft_vc820_ser_driver_info,
&voltcraft_vc830_ser_driver_info,
&voltcraft_vc840_ser_driver_info,
* @param driver The driver to initialize. This must be a pointer to one of
* the entries returned by sr_driver_list(). Must not be NULL.
*
- * @return SR_OK upon success, SR_ERR_ARG upon invalid parameters,
- * SR_ERR_BUG upon internal errors, or another negative error code
- * upon other errors.
+ * @retval SR_OK Success
+ * @retval SR_ERR_ARG Invalid parameter(s).
+ * @retval SR_ERR_BUG Internal errors.
+ * @retval other Another negative error code upon other errors.
*/
SR_API int sr_driver_init(struct sr_context *ctx, struct sr_dev_driver *driver)
{
return l;
}
-/** @private */
+/** Call driver cleanup function for all drivers.
+ * @private */
SR_PRIV void sr_hw_cleanup_all(void)
{
int i;
}
}
-/** A floating reference can be passed in for data.
- * @private */
+/** Allocate struct sr_config.
+ * A floating reference can be passed in for data.
+ * @private
+ */
SR_PRIV struct sr_config *sr_config_new(int key, GVariant *data)
{
struct sr_config *src;
return src;
}
-/** @private */
+/** Free struct sr_config.
+ * @private
+ */
SR_PRIV void sr_config_free(struct sr_config *src)
{
}
/**
- * Returns information about the given driver or device instance.
+ * Query value of a configuration key at the given driver or device instance.
*
- * @param driver The sr_dev_driver struct to query.
- * @param sdi (optional) If the key is specific to a device, this must
+ * @param[in] driver The sr_dev_driver struct to query.
+ * @param[in] sdi (optional) If the key is specific to a device, this must
* contain a pointer to the struct sr_dev_inst to be checked.
* Otherwise it must be NULL.
- * @param probe_group The probe group on the device for which to list the
+ * @param[in] cg The channel group on the device for which to list the
* values, or NULL.
- * @param key The configuration key (SR_CONF_*).
- * @param data Pointer to a GVariant where the value will be stored. Must
- * not be NULL. The caller is given ownership of the GVariant
+ * @param[in] key The configuration key (SR_CONF_*).
+ * @param[in,out] data Pointer to a GVariant where the value will be stored.
+ * Must not be NULL. The caller is given ownership of the GVariant
* and must thus decrease the refcount after use. However if
* this function returns an error code, the field should be
* considered unused, and should not be unreferenced.
*
- * @return SR_OK upon success or SR_ERR in case of error. Note SR_ERR_ARG
- * may be returned by the driver indicating it doesn't know that key,
- * but this is not to be flagged as an error by the caller; merely
- * as an indication that it's not applicable.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Error.
+ * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
+ * interpreted as an error by the caller; merely as an indication
+ * that it's not applicable.
*/
SR_API int sr_config_get(const struct sr_dev_driver *driver,
const struct sr_dev_inst *sdi,
- const struct sr_probe_group *probe_group,
+ const struct sr_channel_group *cg,
int key, GVariant **data)
{
int ret;
if (!driver->config_get)
return SR_ERR_ARG;
- if ((ret = driver->config_get(key, data, sdi, probe_group)) == SR_OK) {
+ if ((ret = driver->config_get(key, data, sdi, cg)) == SR_OK) {
/* Got a floating reference from the driver. Sink it here,
* caller will need to unref when done with it. */
g_variant_ref_sink(*data);
}
/**
- * Set a configuration key in a device instance.
+ * Set value of a configuration key in a device instance.
*
- * @param sdi The device instance.
- * @param probe_group The probe group on the device for which to list the
+ * @param[in] sdi The device instance.
+ * @param[in] cg The channel group on the device for which to list the
* values, or NULL.
- * @param key The configuration key (SR_CONF_*).
+ * @param[in] key The configuration key (SR_CONF_*).
* @param data The new value for the key, as a GVariant with GVariantType
* appropriate to that key. A floating reference can be passed
* in; its refcount will be sunk and unreferenced after use.
*
- * @return SR_OK upon success or SR_ERR in case of error. Note SR_ERR_ARG
- * may be returned by the driver indicating it doesn't know that key,
- * but this is not to be flagged as an error by the caller; merely
- * as an indication that it's not applicable.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Error.
+ * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
+ * interpreted as an error by the caller; merely as an indication
+ * that it's not applicable.
*/
SR_API int sr_config_set(const struct sr_dev_inst *sdi,
- const struct sr_probe_group *probe_group,
+ const struct sr_channel_group *cg,
int key, GVariant *data)
{
int ret;
else if (!sdi->driver->config_set)
ret = SR_ERR_ARG;
else
- ret = sdi->driver->config_set(key, data, sdi, probe_group);
+ ret = sdi->driver->config_set(key, data, sdi, cg);
g_variant_unref(data);
return ret;
}
+/**
+ * Apply configuration settings to the device hardware.
+ *
+ * @param sdi The device instance.
+ *
+ * @return SR_OK upon success or SR_ERR in case of error.
+ */
+SR_API int sr_config_commit(const struct sr_dev_inst *sdi)
+{
+ int ret;
+
+ if (!sdi || !sdi->driver)
+ ret = SR_ERR;
+ else if (!sdi->driver->config_commit)
+ ret = SR_OK;
+ else
+ ret = sdi->driver->config_commit(sdi);
+
+ return ret;
+}
+
/**
* List all possible values for a configuration key.
*
- * @param driver The sr_dev_driver struct to query.
- * @param sdi (optional) If the key is specific to a device, this must
+ * @param[in] driver The sr_dev_driver struct to query.
+ * @param[in] sdi (optional) If the key is specific to a device, this must
* contain a pointer to the struct sr_dev_inst to be checked.
- * @param probe_group The probe group on the device for which to list the
+ * @param[in] cg The channel group on the device for which to list the
* values, or NULL.
- * @param key The configuration key (SR_CONF_*).
- * @param data A pointer to a GVariant where the list will be stored. The
- * caller is given ownership of the GVariant and must thus
+ * @param[in] key The configuration key (SR_CONF_*).
+ * @param[in,out] data A pointer to a GVariant where the list will be stored.
+ * The caller is given ownership of the GVariant and must thus
* unref the GVariant after use. However if this function
* returns an error code, the field should be considered
* unused, and should not be unreferenced.
*
- * @return SR_OK upon success or SR_ERR in case of error. Note SR_ERR_ARG
- * may be returned by the driver indicating it doesn't know that key,
- * but this is not to be flagged as an error by the caller; merely
- * as an indication that it's not applicable.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Error.
+ * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
+ * interpreted as an error by the caller; merely as an indication
+ * that it's not applicable.
*/
SR_API int sr_config_list(const struct sr_dev_driver *driver,
const struct sr_dev_inst *sdi,
- const struct sr_probe_group *probe_group,
+ const struct sr_channel_group *cg,
int key, GVariant **data)
{
int ret;
ret = SR_ERR;
else if (!driver->config_list)
ret = SR_ERR_ARG;
- else if ((ret = driver->config_list(key, data, sdi, probe_group)) == SR_OK)
+ else if ((ret = driver->config_list(key, data, sdi, cg)) == SR_OK)
g_variant_ref_sink(*data);
return ret;
}
/**
- * Get information about a configuration key.
+ * Get information about a configuration key, by key.
*
- * @param key The configuration key.
+ * @param[in] key The configuration key.
*
* @return A pointer to a struct sr_config_info, or NULL if the key
* was not found.
}
/**
- * Get information about an configuration key, by name.
+ * Get information about a configuration key, by name.
*
- * @param optname The configuration key.
+ * @param[in] optname The configuration key.
*
* @return A pointer to a struct sr_config_info, or NULL if the key
* was not found.
/* Unnecessary level of indirection follows. */
-/** @private */
+/** @private
+ * @see sr_session_source_remove()
+ */
SR_PRIV int sr_source_remove(int fd)
{
return sr_session_source_remove(fd);
}
-/** @private */
+/** @private
+ * @see sr_session_source_add()
+ */
SR_PRIV int sr_source_add(int fd, int events, int timeout,
sr_receive_data_callback_t cb, void *cb_data)
{
projects / libsigrok.git / blobdiff