#include <inttypes.h>
#include <glib.h>
#include <libusb.h>
-#include "config.h"
-#include "sigrok.h"
-#include "sigrok-internal.h"
+#include "libsigrok.h"
+#include "libsigrok-internal.h"
#include "analyzer.h"
#define USB_VENDOR 0x0c12
-#define USB_VENDOR_NAME "Zeroplus"
-#define USB_MODEL_NAME "Logic Cube"
-#define USB_MODEL_VERSION ""
+#define VENDOR_NAME "ZEROPLUS"
+#define MODEL_NAME "Logic Cube LAP-C"
+#define MODEL_VERSION NULL
+
+#define NUM_PROBES 16
#define USB_INTERFACE 0
#define USB_CONFIGURATION 1
#define NUM_TRIGGER_STAGES 4
#define PACKET_SIZE 2048 /* ?? */
+//#define ZP_EXPERIMENTAL
+
typedef struct {
+ unsigned short vid;
unsigned short pid;
- char model_name[64];
+ char *model_name;
unsigned int channels;
unsigned int sample_depth; /* In Ksamples/channel */
unsigned int max_sampling_freq;
* same 128K sample depth.
*/
static model_t zeroplus_models[] = {
- {0x7009, "LAP-C(16064)", 16, 64, 100},
- {0x700A, "LAP-C(16128)", 16, 128, 200},
- {0x700B, "LAP-C(32128)", 32, 128, 200},
- {0x700C, "LAP-C(321000)", 32, 1024, 200},
- {0x700D, "LAP-C(322000)", 32, 2048, 200},
- {0x700E, "LAP-C(16032)", 16, 32, 100},
- {0x7016, "LAP-C(162000)", 16, 2048, 200},
+ {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100},
+ {0x0c12, 0x700A, "LAP-C(16128)", 16, 128, 200},
+ /* TODO: we don't know anything about these
+ {0x0c12, 0x700B, "LAP-C(32128)", 32, 128, 200},
+ {0x0c12, 0x700C, "LAP-C(321000)", 32, 1024, 200},
+ {0x0c12, 0x700D, "LAP-C(322000)", 32, 2048, 200},
+ */
+ {0x0c12, 0x700E, "LAP-C(16032)", 16, 32, 100},
+ {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200},
+ { 0, 0, 0, 0, 0, 0 }
};
-static int capabilities[] = {
- SR_HWCAP_LOGIC_ANALYZER,
- SR_HWCAP_SAMPLERATE,
- SR_HWCAP_PROBECONFIG,
- SR_HWCAP_CAPTURE_RATIO,
+static const int hwcaps[] = {
+ SR_CONF_LOGIC_ANALYZER,
+ SR_CONF_SAMPLERATE,
+ SR_CONF_CAPTURE_RATIO,
/* These are really implemented in the driver, not the hardware. */
- SR_HWCAP_LIMIT_SAMPLES,
+ SR_CONF_LIMIT_SAMPLES,
0,
};
-static const char *probe_names[] = {
- "0",
- "1",
- "2",
- "3",
- "4",
- "5",
- "6",
- "7",
- "8",
- "9",
- "10",
- "11",
- "12",
- "13",
- "14",
- "15",
- "16",
- "17",
- "18",
- "19",
- "20",
- "21",
- "22",
- "23",
- "24",
- "25",
- "26",
- "27",
- "28",
- "29",
- "30",
- "31",
+/*
+ * ZEROPLUS LAP-C (16032) numbers the 16 probes A0-A7 and B0-B7.
+ * We currently ignore other untested/unsupported devices here.
+ */
+static const char *probe_names[NUM_PROBES + 1] = {
+ "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
+ "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7",
NULL,
};
-/* List of struct sr_device_instance, maintained by opendev()/closedev(). */
-static GSList *device_instances = NULL;
-
-static libusb_context *usb_context = NULL;
+/* List of struct sr_dev_inst, maintained by dev_open()/dev_close(). */
+SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info;
+static struct sr_dev_driver *di = &zeroplus_logic_cube_driver_info;
/*
* The hardware supports more samplerates than these, but these are the
* TODO: We shouldn't support 150MHz and 200MHz on devices that don't go up
* that high.
*/
-static uint64_t supported_samplerates[] = {
+static const uint64_t supported_samplerates[] = {
SR_HZ(100),
SR_HZ(500),
SR_KHZ(1),
0,
};
-static struct sr_samplerates samplerates = {
- SR_HZ(0),
- SR_HZ(0),
- SR_HZ(0),
+static const struct sr_samplerates samplerates = {
+ 0,
+ 0,
+ 0,
supported_samplerates,
};
-struct zp {
+/* Private, per-device-instance driver context. */
+struct dev_context {
uint64_t cur_samplerate;
+ uint64_t max_samplerate;
uint64_t limit_samples;
int num_channels; /* TODO: This isn't initialized before it's needed :( */
- uint64_t memory_size;
- uint8_t probe_mask;
- uint8_t trigger_mask[NUM_TRIGGER_STAGES];
- uint8_t trigger_value[NUM_TRIGGER_STAGES];
+ int memory_size;
+ unsigned int max_memory_size;
+ //uint8_t probe_mask;
+ //uint8_t trigger_mask[NUM_TRIGGER_STAGES];
+ //uint8_t trigger_value[NUM_TRIGGER_STAGES];
// uint8_t trigger_buffer[NUM_TRIGGER_STAGES];
+ int trigger;
+ unsigned int capture_ratio;
- struct sr_usb_device_instance *usb;
+ /* TODO: this belongs in the device instance */
+ struct sr_usb_dev_inst *usb;
};
-static int hw_set_configuration(int device_index, int capability, void *value);
+static int hw_dev_close(struct sr_dev_inst *sdi);
static unsigned int get_memory_size(int type)
{
return 0;
}
-static int opendev4(struct sr_device_instance **sdi, libusb_device *dev,
- struct libusb_device_descriptor *des)
-{
- struct zp *zp;
- unsigned int i;
- int err;
-
- /* Note: sdi is non-NULL, the caller already checked this. */
-
- if (!(zp = (*sdi)->priv)) {
- sr_err("zp: %s: (*sdi)->priv was NULL", __func__);
- return -1;
- }
-
- if ((err = libusb_get_device_descriptor(dev, des))) {
- sr_err("failed to get device descriptor: %d", err);
- return -1;
- }
-
- if (des->idVendor != USB_VENDOR)
- return 0;
-
- if (libusb_get_bus_number(dev) == zp->usb->bus
- && libusb_get_device_address(dev) == zp->usb->address) {
-
- for (i = 0; i < ARRAY_SIZE(zeroplus_models); i++) {
- if (!(des->idProduct == zeroplus_models[i].pid))
- continue;
-
- sr_info("Found PID=%04X (%s)", des->idProduct,
- zeroplus_models[i].model_name);
- zp->num_channels = zeroplus_models[i].channels;
- zp->memory_size = zeroplus_models[i].sample_depth * 1024;
- break;
- }
-
- if (zp->num_channels == 0) {
- sr_err("Unknown ZeroPlus device %04X", des->idProduct);
- return -2;
- }
-
- /* Found it. */
- if (!(err = libusb_open(dev, &(zp->usb->devhdl)))) {
- (*sdi)->status = SR_ST_ACTIVE;
- sr_info("opened device %d on %d.%d interface %d",
- (*sdi)->index, zp->usb->bus,
- zp->usb->address, USB_INTERFACE);
- } else {
- sr_err("failed to open device: %d", err);
- *sdi = NULL;
- }
- }
-
- return 0;
-}
-
-static struct sr_device_instance *zp_open_device(int device_index)
-{
- struct sr_device_instance *sdi;
- libusb_device **devlist;
- struct libusb_device_descriptor des;
- int err, i;
-
- if (!(sdi = sr_get_device_instance(device_instances, device_index)))
- return NULL;
-
- libusb_get_device_list(usb_context, &devlist);
- if (sdi->status == SR_ST_INACTIVE) {
- /* Find the device by vendor, product, bus and address. */
- libusb_get_device_list(usb_context, &devlist);
- for (i = 0; devlist[i]; i++) {
- /* TODO: Error handling. */
- err = opendev4(&sdi, devlist[i], &des);
- }
- } else {
- /* Status must be SR_ST_ACTIVE, i.e. already in use... */
- sdi = NULL;
- }
- libusb_free_device_list(devlist, 1);
-
- if (sdi && sdi->status != SR_ST_ACTIVE)
- sdi = NULL;
-
- return sdi;
-}
-
-static void close_device(struct sr_device_instance *sdi)
-{
- struct zp *zp;
-
- if (!(zp = sdi->priv)) {
- sr_err("zp: %s: sdi->priv was NULL", __func__);
- return; /* FIXME */
- }
-
- if (!zp->usb->devhdl)
- return;
-
- sr_info("closing device %d on %d.%d interface %d", sdi->index,
- zp->usb->bus, zp->usb->address, USB_INTERFACE);
- libusb_release_interface(zp->usb->devhdl, USB_INTERFACE);
- libusb_reset_device(zp->usb->devhdl);
- libusb_close(zp->usb->devhdl);
- zp->usb->devhdl = NULL;
- /* TODO: Call libusb_exit() here or only in hw_cleanup()? */
- sdi->status = SR_ST_INACTIVE;
-}
-
-static int configure_probes(struct sr_device_instance *sdi, GSList *probes)
+#if 0
+static int configure_probes(const struct sr_dev_inst *sdi)
{
- struct zp *zp;
- struct sr_probe *probe;
- GSList *l;
+ struct dev_context *devc;
+ const struct sr_probe *probe;
+ const GSList *l;
int probe_bit, stage, i;
char *tc;
/* Note: sdi and sdi->priv are non-NULL, the caller checked this. */
- zp = sdi->priv;
+ devc = sdi->priv;
- zp->probe_mask = 0;
+ devc->probe_mask = 0;
for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
- zp->trigger_mask[i] = 0;
- zp->trigger_value[i] = 0;
+ devc->trigger_mask[i] = 0;
+ devc->trigger_value[i] = 0;
}
stage = -1;
- for (l = probes; l; l = l->next) {
+ for (l = sdi->probes; l; l = l->next) {
probe = (struct sr_probe *)l->data;
if (probe->enabled == FALSE)
continue;
- probe_bit = 1 << (probe->index - 1);
- zp->probe_mask |= probe_bit;
+ probe_bit = 1 << (probe->index);
+ devc->probe_mask |= probe_bit;
if (probe->trigger) {
stage = 0;
for (tc = probe->trigger; *tc; tc++) {
- zp->trigger_mask[stage] |= probe_bit;
+ devc->trigger_mask[stage] |= probe_bit;
if (*tc == '1')
- zp->trigger_value[stage] |= probe_bit;
+ devc->trigger_value[stage] |= probe_bit;
stage++;
if (stage > NUM_TRIGGER_STAGES)
return SR_ERR;
return SR_OK;
}
+#endif
+
+static int configure_probes(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ const GSList *l;
+ const struct sr_probe *probe;
+ char *tc;
+ int type;
+
+ /* Note: sdi and sdi->priv are non-NULL, the caller checked this. */
+ devc = sdi->priv;
+
+ for (l = sdi->probes; l; l = l->next) {
+ probe = (struct sr_probe *)l->data;
+ if (probe->enabled == FALSE)
+ continue;
+
+ if ((tc = probe->trigger)) {
+ switch (*tc) {
+ case '1':
+ type = TRIGGER_HIGH;
+ break;
+ case '0':
+ type = TRIGGER_LOW;
+ break;
+#if 0
+ case 'r':
+ type = TRIGGER_POSEDGE;
+ break;
+ case 'f':
+ type = TRIGGER_NEGEDGE;
+ break;
+ case 'c':
+ type = TRIGGER_ANYEDGE;
+ break;
+#endif
+ default:
+ return SR_ERR;
+ }
+ analyzer_add_trigger(probe->index, type);
+ devc->trigger = 1;
+ }
+ }
+
+ return SR_OK;
+}
+
+static int clear_instances(void)
+{
+ GSList *l;
+ struct sr_dev_inst *sdi;
+ struct drv_context *drvc;
+ struct dev_context *devc;
+
+ drvc = di->priv;
+ for (l = drvc->instances; l; l = l->next) {
+ sdi = l->data;
+ if (!(devc = sdi->priv)) {
+ /* Log error, but continue cleaning up the rest. */
+ sr_err("zeroplus: %s: sdi->priv was NULL, continuing", __func__);
+ continue;
+ }
+ sr_usb_dev_inst_free(devc->usb);
+ /* Properly close all devices... */
+ hw_dev_close(sdi);
+ /* ...and free all their memory. */
+ sr_dev_inst_free(sdi);
+ }
+ g_slist_free(drvc->instances);
+ drvc->instances = NULL;
+
+ return SR_OK;
+}
/*
* API callbacks
*/
-static int hw_init(const char *deviceinfo)
+static int hw_init(struct sr_context *sr_ctx)
+{
+ struct drv_context *drvc;
+
+ if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
+ sr_err("zeroplus: driver context malloc failed.");
+ return SR_ERR_MALLOC;
+ }
+ drvc->sr_ctx = sr_ctx;
+ di->priv = drvc;
+
+ return SR_OK;
+}
+
+static GSList *hw_scan(GSList *options)
{
- struct sr_device_instance *sdi;
+ struct sr_dev_inst *sdi;
+ struct sr_probe *probe;
+ struct drv_context *drvc;
+ struct dev_context *devc;
+ model_t *prof;
struct libusb_device_descriptor des;
libusb_device **devlist;
- int err, devcnt, i;
- struct zp *zp;
+ GSList *devices;
+ int ret, devcnt, i, j;
- /* Avoid compiler warnings. */
- (void)deviceinfo;
+ (void)options;
- /* Allocate memory for our private driver context. */
- if (!(zp = g_try_malloc(sizeof(struct zp)))) {
- sr_err("zp: %s: struct zp malloc failed", __func__);
- return 0;
- }
+ drvc = di->priv;
+ devices = NULL;
- /* Set some sane defaults. */
- zp->cur_samplerate = 0;
- zp->limit_samples = 0;
- zp->num_channels = 32; /* TODO: This isn't initialized before it's needed :( */
- zp->memory_size = 0;
- zp->probe_mask = 0;
- memset(zp->trigger_mask, 0, NUM_TRIGGER_STAGES);
- memset(zp->trigger_value, 0, NUM_TRIGGER_STAGES);
- // memset(zp->trigger_buffer, 0, NUM_TRIGGER_STAGES);
-
- if (libusb_init(&usb_context) != 0) {
- sr_err("Failed to initialize USB.");
- return 0;
- }
+ clear_instances();
- /* Find all ZeroPlus analyzers and add them to device list. */
+ /* Find all ZEROPLUS analyzers and add them to device list. */
devcnt = 0;
- libusb_get_device_list(usb_context, &devlist); /* TODO: Errors. */
+ libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */
for (i = 0; devlist[i]; i++) {
- err = libusb_get_device_descriptor(devlist[i], &des);
- if (err != 0) {
- sr_err("failed to get device descriptor: %d", err);
+ ret = libusb_get_device_descriptor(devlist[i], &des);
+ if (ret != 0) {
+ sr_err("zp: failed to get device descriptor: %s",
+ libusb_error_name(ret));
continue;
}
- if (des.idVendor == USB_VENDOR) {
- /*
- * Definitely a Zeroplus.
- * TODO: Any way to detect specific model/version in
- * the zeroplus range?
- */
- /* Register the device with libsigrok. */
- sdi = sr_device_instance_new(devcnt,
- SR_ST_INACTIVE, USB_VENDOR_NAME,
- USB_MODEL_NAME, USB_MODEL_VERSION);
- if (!sdi) {
- sr_err("zp: %s: sr_device_instance_new failed",
- __func__);
- return 0;
+ prof = NULL;
+ for (j = 0; j < zeroplus_models[j].vid; j++) {
+ if (des.idVendor == zeroplus_models[j].vid &&
+ des.idProduct == zeroplus_models[j].pid) {
+ prof = &zeroplus_models[j];
}
+ }
+ /* Skip if the device was not found */
+ if (!prof)
+ continue;
+ sr_info("zp: Found ZEROPLUS model %s", prof->model_name);
- sdi->priv = zp;
+ /* Register the device with libsigrok. */
+ if (!(sdi = sr_dev_inst_new(devcnt, SR_ST_INACTIVE,
+ VENDOR_NAME, prof->model_name, NULL))) {
+ sr_err("zp: %s: sr_dev_inst_new failed", __func__);
+ return NULL;
+ }
+ sdi->driver = di;
- device_instances =
- g_slist_append(device_instances, sdi);
- zp->usb = sr_usb_device_instance_new(
- libusb_get_bus_number(devlist[i]),
- libusb_get_device_address(devlist[i]), NULL);
- devcnt++;
+ /* Allocate memory for our private driver context. */
+ if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
+ sr_err("zp: %s: devc malloc failed", __func__);
+ return NULL;
+ }
+ sdi->priv = devc;
+ devc->num_channels = prof->channels;
+#ifdef ZP_EXPERIMENTAL
+ devc->max_memory_size = 128 * 1024;
+ devc->max_samplerate = 200;
+#else
+ devc->max_memory_size = prof->sample_depth * 1024;
+ devc->max_samplerate = prof->max_sampling_freq;
+#endif
+ devc->max_samplerate *= SR_MHZ(1);
+ devc->memory_size = MEMORY_SIZE_8K;
+ // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES);
+
+ /* Fill in probelist according to this device's profile. */
+ for (j = 0; j < devc->num_channels; j++) {
+ if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE,
+ probe_names[j])))
+ return NULL;
+ sdi->probes = g_slist_append(sdi->probes, probe);
}
+
+ devices = g_slist_append(devices, sdi);
+ drvc->instances = g_slist_append(drvc->instances, sdi);
+ devc->usb = sr_usb_dev_inst_new(
+ libusb_get_bus_number(devlist[i]),
+ libusb_get_device_address(devlist[i]), NULL);
+ devcnt++;
+
}
libusb_free_device_list(devlist, 1);
- return devcnt;
+ return devices;
}
-static int hw_opendev(int device_index)
+static GSList *hw_dev_list(void)
{
- struct sr_device_instance *sdi;
- struct zp *zp;
- int err;
+ struct drv_context *drvc;
- if (!(sdi = zp_open_device(device_index))) {
- sr_err("unable to open device");
- return SR_ERR;
- }
+ drvc = di->priv;
- /* TODO: Note: sdi is retrieved in zp_open_device(). */
+ return drvc->instances;
+}
- if (!(zp = sdi->priv)) {
+static int hw_dev_open(struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ struct drv_context *drvc = di->priv;
+ libusb_device **devlist, *dev;
+ struct libusb_device_descriptor des;
+ int device_count, ret, i;
+
+ if (!(devc = sdi->priv)) {
sr_err("zp: %s: sdi->priv was NULL", __func__);
return SR_ERR_ARG;
}
- err = libusb_set_configuration(zp->usb->devhdl, USB_CONFIGURATION);
- if (err < 0) {
- sr_err("zp: Unable to set USB configuration %d: %d",
- USB_CONFIGURATION, err);
+ device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx,
+ &devlist);
+ if (device_count < 0) {
+ sr_err("zp: Failed to retrieve device list");
return SR_ERR;
}
- err = libusb_claim_interface(zp->usb->devhdl, USB_INTERFACE);
- if (err != 0) {
- sr_err("Unable to claim interface: %d", err);
+ dev = NULL;
+ for (i = 0; i < device_count; i++) {
+ if ((ret = libusb_get_device_descriptor(devlist[i], &des))) {
+ sr_err("zp: Failed to get device descriptor: %s.",
+ libusb_error_name(ret));
+ continue;
+ }
+ if (libusb_get_bus_number(devlist[i]) == devc->usb->bus
+ && libusb_get_device_address(devlist[i]) == devc->usb->address) {
+ dev = devlist[i];
+ break;
+ }
+ }
+ if (!dev) {
+ sr_err("device on bus %d address %d disappeared!",
+ devc->usb->bus, devc->usb->address);
return SR_ERR;
}
- analyzer_reset(zp->usb->devhdl);
- analyzer_initialize(zp->usb->devhdl);
+ if (!(ret = libusb_open(dev, &(devc->usb->devhdl)))) {
+ sdi->status = SR_ST_ACTIVE;
+ sr_info("zp: opened device %d on %d.%d interface %d",
+ sdi->index, devc->usb->bus,
+ devc->usb->address, USB_INTERFACE);
+ } else {
+ sr_err("zp: failed to open device: %s", libusb_error_name(ret));
+ return SR_ERR;
+ }
+
+ ret = libusb_set_configuration(devc->usb->devhdl, USB_CONFIGURATION);
+ if (ret < 0) {
+ sr_err("zp: Unable to set USB configuration %d: %s",
+ USB_CONFIGURATION, libusb_error_name(ret));
+ return SR_ERR;
+ }
- analyzer_set_memory_size(MEMORY_SIZE_512K);
+ ret = libusb_claim_interface(devc->usb->devhdl, USB_INTERFACE);
+ if (ret != 0) {
+ sr_err("zp: Unable to claim interface: %s",
+ libusb_error_name(ret));
+ return SR_ERR;
+ }
+
+ /* Set default configuration after power on */
+ if (analyzer_read_status(devc->usb->devhdl) == 0)
+ analyzer_configure(devc->usb->devhdl);
+
+ analyzer_reset(devc->usb->devhdl);
+ analyzer_initialize(devc->usb->devhdl);
+
+ //analyzer_set_memory_size(MEMORY_SIZE_512K);
// analyzer_set_freq(g_freq, g_freq_scale);
analyzer_set_trigger_count(1);
// analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger)
// * get_memory_size(g_memory_size)) / 100) >> 2);
- analyzer_set_ramsize_trigger_address(
- (100 * get_memory_size(MEMORY_SIZE_512K) / 100) >> 2);
#if 0
if (g_double_mode == 1)
#endif
analyzer_set_compression(COMPRESSION_NONE);
- if (zp->cur_samplerate == 0) {
- /* Samplerate hasn't been set. Default to the slowest one. */
- if (hw_set_configuration(device_index, SR_HWCAP_SAMPLERATE,
- &samplerates.list[0]) == SR_ERR)
- return SR_ERR;
+ if (devc->cur_samplerate == 0) {
+ /* Samplerate hasn't been set. Default to 1MHz. */
+ analyzer_set_freq(1, FREQ_SCALE_MHZ);
+ devc->cur_samplerate = SR_MHZ(1);
}
return SR_OK;
}
-static int hw_closedev(int device_index)
+static int hw_dev_close(struct sr_dev_inst *sdi)
{
- struct sr_device_instance *sdi;
+ struct dev_context *devc;
- if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
- sr_err("zp: %s: sdi was NULL", __func__);
- return SR_ERR; /* TODO: SR_ERR_ARG? */
+ if (!(devc = sdi->priv)) {
+ sr_err("zp: %s: sdi->priv was NULL", __func__);
+ return SR_ERR;
}
- /* TODO */
- close_device(sdi);
+ if (!devc->usb->devhdl)
+ return SR_ERR;
+
+ sr_info("zp: closing device %d on %d.%d interface %d", sdi->index,
+ devc->usb->bus, devc->usb->address, USB_INTERFACE);
+ libusb_release_interface(devc->usb->devhdl, USB_INTERFACE);
+ libusb_reset_device(devc->usb->devhdl);
+ libusb_close(devc->usb->devhdl);
+ devc->usb->devhdl = NULL;
+ sdi->status = SR_ST_INACTIVE;
return SR_OK;
}
-static void hw_cleanup(void)
+static int hw_cleanup(void)
{
- GSList *l;
+ struct drv_context *drvc;
- /* Properly close all devices... */
- for (l = device_instances; l; l = l->next)
- close_device((struct sr_device_instance *)l->data);
+ if (!(drvc = di->priv))
+ return SR_OK;
- /* ...and free all their memory. */
- for (l = device_instances; l; l = l->next)
- g_free(l->data);
- g_slist_free(device_instances);
- device_instances = NULL;
+ clear_instances();
- if (usb_context)
- libusb_exit(usb_context);
- usb_context = NULL;
+ return SR_OK;
}
-static void *hw_get_device_info(int device_index, int device_info_id)
+static int config_get(int id, const void **data, const struct sr_dev_inst *sdi)
{
- struct sr_device_instance *sdi;
- struct zp *zp;
- void *info;
-
- if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
- sr_err("zp: %s: sdi was NULL", __func__);
- return NULL;
- }
+ struct dev_context *devc;
- if (!(zp = sdi->priv)) {
- sr_err("zp: %s: sdi->priv was NULL", __func__);
- return NULL;
- }
-
- switch (device_info_id) {
- case SR_DI_INSTANCE:
- info = sdi;
- break;
- case SR_DI_NUM_PROBES:
- info = GINT_TO_POINTER(zp->num_channels);
- break;
- case SR_DI_PROBE_NAMES:
- info = probe_names;
+ switch (id) {
+ case SR_DI_HWCAPS:
+ *data = hwcaps;
break;
case SR_DI_SAMPLERATES:
- info = &samplerates;
+ *data = &samplerates;
+ sr_spew("zp: %s: Returning samplerates.", __func__);
break;
case SR_DI_TRIGGER_TYPES:
- info = TRIGGER_TYPES;
+ *data = TRIGGER_TYPES;
+ sr_spew("zp: %s: Returning triggertypes: %s.", __func__, TRIGGER_TYPES);
break;
case SR_DI_CUR_SAMPLERATE:
- info = &zp->cur_samplerate;
+ if (sdi) {
+ devc = sdi->priv;
+ *data = &devc->cur_samplerate;
+ sr_spew("zp: %s: Returning samplerate: %" PRIu64 "Hz.",
+ __func__, devc->cur_samplerate);
+ } else
+ return SR_ERR;
break;
default:
- /* Unknown device info ID, return NULL. */
- sr_err("zp: %s: Unknown device info ID", __func__);
- info = NULL;
- break;
+ return SR_ERR_ARG;
}
- return info;
+ return SR_OK;
}
-static int hw_get_status(int device_index)
+static int set_samplerate(struct dev_context *devc, uint64_t samplerate)
{
- struct sr_device_instance *sdi;
+ int i;
+
+ for (i = 0; supported_samplerates[i]; i++)
+ if (samplerate == supported_samplerates[i])
+ break;
+ if (!supported_samplerates[i] || samplerate > devc->max_samplerate) {
+ sr_err("zp: %s: unsupported samplerate", __func__);
+ return SR_ERR_ARG;
+ }
+
+ sr_info("zp: Setting samplerate to %" PRIu64 "Hz.", samplerate);
- sdi = sr_get_device_instance(device_instances, device_index);
- if (sdi)
- return sdi->status;
+ if (samplerate >= SR_MHZ(1))
+ analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ);
+ else if (samplerate >= SR_KHZ(1))
+ analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ);
else
- return SR_ST_NOT_FOUND;
+ analyzer_set_freq(samplerate, FREQ_SCALE_HZ);
+
+ devc->cur_samplerate = samplerate;
+
+ return SR_OK;
}
-static int *hw_get_capabilities(void)
+static int set_limit_samples(struct dev_context *devc, uint64_t samples)
{
- return capabilities;
+ devc->limit_samples = samples;
+
+ if (samples <= 2 * 1024)
+ devc->memory_size = MEMORY_SIZE_8K;
+ else if (samples <= 16 * 1024)
+ devc->memory_size = MEMORY_SIZE_64K;
+ else if (samples <= 32 * 1024 ||
+ devc->max_memory_size <= 32 * 1024)
+ devc->memory_size = MEMORY_SIZE_128K;
+ else
+ devc->memory_size = MEMORY_SIZE_512K;
+
+ sr_info("zp: Setting memory size to %dK.",
+ get_memory_size(devc->memory_size) / 1024);
+
+ analyzer_set_memory_size(devc->memory_size);
+
+ return SR_OK;
}
-static int set_configuration_samplerate(struct sr_device_instance *sdi,
- uint64_t samplerate)
+static int set_capture_ratio(struct dev_context *devc, uint64_t ratio)
{
- struct zp *zp;
-
- if (!sdi) {
- sr_err("zp: %s: sdi was NULL", __func__);
+ if (ratio > 100) {
+ sr_err("zp: %s: invalid capture ratio", __func__);
return SR_ERR_ARG;
}
- if (!(zp = sdi->priv)) {
- sr_err("zp: %s: sdi->priv was NULL", __func__);
- return SR_ERR_ARG;
- }
+ devc->capture_ratio = ratio;
- sr_info("zp: Setting samplerate to %" PRIu64 "Hz.", samplerate);
-
- if (samplerate > SR_MHZ(1))
- analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ);
- else if (samplerate > SR_KHZ(1))
- analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ);
- else
- analyzer_set_freq(samplerate, FREQ_SCALE_HZ);
-
- zp->cur_samplerate = samplerate;
+ sr_info("zp: Setting capture ratio to %d%%.", devc->capture_ratio);
return SR_OK;
}
-static int hw_set_configuration(int device_index, int capability, void *value)
+static int config_set(int id, const void *value, const struct sr_dev_inst *sdi)
{
- struct sr_device_instance *sdi;
- uint64_t *tmp_u64;
- struct zp *zp;
+ struct dev_context *devc;
- if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
+ if (!sdi) {
sr_err("zp: %s: sdi was NULL", __func__);
- return SR_ERR;
+ return SR_ERR_ARG;
}
- if (!(zp = sdi->priv)) {
+ if (!(devc = sdi->priv)) {
sr_err("zp: %s: sdi->priv was NULL", __func__);
return SR_ERR_ARG;
}
- switch (capability) {
- case SR_HWCAP_SAMPLERATE:
- tmp_u64 = value;
- return set_configuration_samplerate(sdi, *tmp_u64);
- case SR_HWCAP_PROBECONFIG:
- return configure_probes(sdi, (GSList *)value);
- case SR_HWCAP_LIMIT_SAMPLES:
- tmp_u64 = value;
- zp->limit_samples = *tmp_u64;
- return SR_OK;
+ switch (id) {
+ case SR_CONF_SAMPLERATE:
+ return set_samplerate(devc, *(const uint64_t *)value);
+ case SR_CONF_LIMIT_SAMPLES:
+ return set_limit_samples(devc, *(const uint64_t *)value);
+ case SR_CONF_CAPTURE_RATIO:
+ return set_capture_ratio(devc, *(const uint64_t *)value);
default:
return SR_ERR;
}
}
-static int hw_start_acquisition(int device_index, gpointer session_data)
+static void set_triggerbar(struct dev_context *devc)
+{
+ unsigned int ramsize;
+ unsigned int n;
+ unsigned int triggerbar;
+
+ ramsize = get_memory_size(devc->memory_size) / 4;
+ if (devc->trigger) {
+ n = ramsize;
+ if (devc->max_memory_size < n)
+ n = devc->max_memory_size;
+ if (devc->limit_samples < n)
+ n = devc->limit_samples;
+ n = n * devc->capture_ratio / 100;
+ if (n > ramsize - 8)
+ triggerbar = ramsize - 8;
+ else
+ triggerbar = n;
+ } else {
+ triggerbar = 0;
+ }
+ analyzer_set_triggerbar_address(triggerbar);
+ analyzer_set_ramsize_trigger_address(ramsize - triggerbar);
+
+ sr_dbg("zp: triggerbar_address = %d(0x%x)", triggerbar, triggerbar);
+ sr_dbg("zp: ramsize_triggerbar_address = %d(0x%x)",
+ ramsize - triggerbar, ramsize - triggerbar);
+}
+
+static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
+ void *cb_data)
{
- struct sr_device_instance *sdi;
struct sr_datafeed_packet packet;
struct sr_datafeed_logic logic;
struct sr_datafeed_header header;
- uint64_t samples_read;
+ //uint64_t samples_read;
int res;
unsigned int packet_num;
+ unsigned int n;
unsigned char *buf;
- struct zp *zp;
+ struct dev_context *devc;
- if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
- sr_err("zp: %s: sdi was NULL", __func__);
- return SR_ERR;
- }
-
- if (!(zp = sdi->priv)) {
+ if (!(devc = sdi->priv)) {
sr_err("zp: %s: sdi->priv was NULL", __func__);
return SR_ERR_ARG;
}
+ if (configure_probes(sdi) != SR_OK) {
+ sr_err("zp: failed to configured probes");
+ return SR_ERR;
+ }
+
+ set_triggerbar(devc);
+
/* push configured settings to device */
- analyzer_configure(zp->usb->devhdl);
+ analyzer_configure(devc->usb->devhdl);
- analyzer_start(zp->usb->devhdl);
- sr_info("Waiting for data");
- analyzer_wait_data(zp->usb->devhdl);
+ analyzer_start(devc->usb->devhdl);
+ sr_info("zp: Waiting for data");
+ analyzer_wait_data(devc->usb->devhdl);
- sr_info("Stop address = 0x%x", analyzer_get_stop_address(zp->usb->devhdl));
- sr_info("Now address = 0x%x", analyzer_get_now_address(zp->usb->devhdl));
- sr_info("Trigger address = 0x%x", analyzer_get_trigger_address(zp->usb->devhdl));
+ sr_info("zp: Stop address = 0x%x",
+ analyzer_get_stop_address(devc->usb->devhdl));
+ sr_info("zp: Now address = 0x%x",
+ analyzer_get_now_address(devc->usb->devhdl));
+ sr_info("zp: Trigger address = 0x%x",
+ analyzer_get_trigger_address(devc->usb->devhdl));
packet.type = SR_DF_HEADER;
packet.payload = &header;
header.feed_version = 1;
gettimeofday(&header.starttime, NULL);
- header.samplerate = zp->cur_samplerate;
- header.num_logic_probes = zp->num_channels;
- sr_session_bus(session_data, &packet);
+ sr_session_send(cb_data, &packet);
if (!(buf = g_try_malloc(PACKET_SIZE))) {
sr_err("zp: %s: buf malloc failed", __func__);
return SR_ERR_MALLOC;
}
- samples_read = 0;
- analyzer_read_start(zp->usb->devhdl);
+ //samples_read = 0;
+ analyzer_read_start(devc->usb->devhdl);
/* Send the incoming transfer to the session bus. */
- for (packet_num = 0; packet_num < (zp->memory_size * 4 / PACKET_SIZE);
- packet_num++) {
- res = analyzer_read_data(zp->usb->devhdl, buf, PACKET_SIZE);
- sr_info("Tried to read %llx bytes, actually read %x bytes",
+ n = get_memory_size(devc->memory_size);
+ if (devc->max_memory_size * 4 < n)
+ n = devc->max_memory_size * 4;
+ for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) {
+ res = analyzer_read_data(devc->usb->devhdl, buf, PACKET_SIZE);
+ sr_info("zp: Tried to read %d bytes, actually read %d bytes",
PACKET_SIZE, res);
packet.type = SR_DF_LOGIC;
logic.length = PACKET_SIZE;
logic.unitsize = 4;
logic.data = buf;
- sr_session_bus(session_data, &packet);
- samples_read += res / 4;
+ sr_session_send(cb_data, &packet);
+ //samples_read += res / 4;
}
- analyzer_read_stop(zp->usb->devhdl);
+ analyzer_read_stop(devc->usb->devhdl);
g_free(buf);
packet.type = SR_DF_END;
- sr_session_bus(session_data, &packet);
+ sr_session_send(cb_data, &packet);
return SR_OK;
}
-/* This stops acquisition on ALL devices, ignoring device_index. */
-static int hw_stop_acquisition(int device_index, gpointer session_device_id)
+/* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
+static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
struct sr_datafeed_packet packet;
- struct sr_device_instance *sdi;
- struct zp *zp;
+ struct dev_context *devc;
packet.type = SR_DF_END;
- sr_session_bus(session_device_id, &packet);
-
- if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
- sr_err("zp: %s: sdi was NULL", __func__);
- return SR_ERR_BUG;
- }
+ sr_session_send(cb_data, &packet);
- if (!(zp = sdi->priv)) {
+ if (!(devc = sdi->priv)) {
sr_err("zp: %s: sdi->priv was NULL", __func__);
return SR_ERR_BUG;
}
- analyzer_reset(zp->usb->devhdl);
+ analyzer_reset(devc->usb->devhdl);
/* TODO: Need to cancel and free any queued up transfers. */
return SR_OK;
}
-SR_PRIV struct sr_device_plugin zeroplus_logic_cube_plugin_info = {
+SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = {
.name = "zeroplus-logic-cube",
- .longname = "Zeroplus Logic Cube LAP-C series",
+ .longname = "ZEROPLUS Logic Cube LAP-C series",
.api_version = 1,
.init = hw_init,
.cleanup = hw_cleanup,
- .opendev = hw_opendev,
- .closedev = hw_closedev,
- .get_device_info = hw_get_device_info,
- .get_status = hw_get_status,
- .get_capabilities = hw_get_capabilities,
- .set_configuration = hw_set_configuration,
- .start_acquisition = hw_start_acquisition,
- .stop_acquisition = hw_stop_acquisition,
+ .scan = hw_scan,
+ .dev_list = hw_dev_list,
+ .dev_clear = hw_cleanup,
+ .config_get = config_get,
+ .config_set = config_set,
+ .dev_open = hw_dev_open,
+ .dev_close = hw_dev_close,
+ .dev_acquisition_start = hw_dev_acquisition_start,
+ .dev_acquisition_stop = hw_dev_acquisition_stop,
+ .priv = NULL,
};
projects / libsigrok.git / blobdiff