* This file is part of the libsigrok project.
*
* Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2014 Matthias Heidbrink <m-sigrok@heidbrink.biz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/** @file
+ * <em>Manson HCS-3xxx Series</em> power supply driver
+ * @internal
+ */
+
#ifndef LIBSIGROK_HARDWARE_MANSON_HCS_3XXX_PROTOCOL_H
#define LIBSIGROK_HARDWARE_MANSON_HCS_3XXX_PROTOCOL_H
#include <stdint.h>
+#include <string.h>
+#include <math.h>
#include <glib.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
#define LOG_PREFIX "manson-hcs-3xxx"
+enum {
+ MANSON_HCS_3100,
+ MANSON_HCS_3102,
+ MANSON_HCS_3104,
+ MANSON_HCS_3150,
+ MANSON_HCS_3200,
+ MANSON_HCS_3202,
+ MANSON_HCS_3204,
+ MANSON_HCS_3300,
+ MANSON_HCS_3302,
+ MANSON_HCS_3304,
+ MANSON_HCS_3400,
+ MANSON_HCS_3402,
+ MANSON_HCS_3404,
+ MANSON_HCS_3600,
+ MANSON_HCS_3602,
+ MANSON_HCS_3604,
+};
+
+/** Information on a single model. */
+struct hcs_model {
+ int model_id; /**< Model info */
+ char *name; /**< Model name */
+ char *id; /**< Model ID, like delivered by interface */
+ double voltage[3]; /**< Min, max, step */
+ double current[3]; /**< Min, max, step */
+};
+
/** Private, per-device-instance driver context. */
struct dev_context {
+ struct hcs_model *model; /**< Model informaion. */
+
+ uint64_t limit_samples;
+ uint64_t limit_msec;
+ uint64_t num_samples;
+ int64_t starttime;
+ int64_t req_sent_at;
+ gboolean reply_pending;
+
+ void *cb_data;
+
+ float current; /**< Last current value [A] read from device. */
+ float current_max; /**< Output current set. */
+ float current_max_device;/**< Device-provided maximum output current. */
+ float voltage; /**< Last voltage value [V] read from device. */
+ float voltage_max; /**< Output voltage set. */
+ float voltage_max_device;/**< Device-provided maximum output voltage. */
+ gboolean cc_mode; /**< Device is in constant current mode (otherwise constant voltage). */
+
+ gboolean output_enabled; /**< Is the output enabled? */
+
+ char buf[50];
+ int buflen;
};
-SR_PRIV int manson_hcs_3xxx_receive_data(int fd, int revents, void *cb_data);
+SR_PRIV int hcs_parse_volt_curr_mode(struct sr_dev_inst *sdi, char **tokens);
+SR_PRIV int hcs_read_reply(struct sr_serial_dev_inst *serial, int lines, char* buf, int buflen);
+SR_PRIV int hcs_send_cmd(struct sr_serial_dev_inst *serial, const char *cmd, ...);
+SR_PRIV int hcs_receive_data(int fd, int revents, void *cb_data);
#endif