+++ /dev/null
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "protocol.h"
-
-#define USB_VENDOR_ID 0x0403
-#define USB_DEVICE_ID 0x6014
-#define USB_VENDOR_NAME "IKALOGIC"
-#define USB_MODEL_NAME "ScanaPLUS"
-#define USB_IPRODUCT "SCANAPLUS"
-
-#define SAMPLE_BUF_SIZE (8 * 1024 * 1024)
-
-static const int32_t hwcaps[] = {
- SR_CONF_LOGIC_ANALYZER,
- SR_CONF_SAMPLERATE,
- SR_CONF_LIMIT_MSEC,
- SR_CONF_LIMIT_SAMPLES,
- SR_CONF_CONTINUOUS, // TODO?
-};
-
-/* Channels are numbered 1-9. */
-static const char *channel_names[] = {
- "1", "2", "3", "4", "5", "6", "7", "8", "9",
- NULL,
-};
-
-/* Note: The IKALOGIC ScanaPLUS always samples at 100MHz. */
-static uint64_t samplerates[1] = { SR_MHZ(100) };
-
-SR_PRIV struct sr_dev_driver ikalogic_scanaplus_driver_info;
-static struct sr_dev_driver *di = &ikalogic_scanaplus_driver_info;
-
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
-
-static void clear_helper(void *priv)
-{
- struct dev_context *devc;
-
- devc = priv;
-
- ftdi_free(devc->ftdic);
- g_free(devc->compressed_buf);
- g_free(devc->sample_buf);
-}
-
-static int dev_clear(void)
-{
- return std_dev_clear(di, clear_helper);
-}
-
-static int init(struct sr_context *sr_ctx)
-{
- return std_init(sr_ctx, di, LOG_PREFIX);
-}
-
-static GSList *scan(GSList *options)
-{
- struct sr_dev_inst *sdi;
- struct sr_channel *ch;
- struct drv_context *drvc;
- struct dev_context *devc;
- GSList *devices;
- unsigned int i;
- int ret;
-
- (void)options;
-
- drvc = di->priv;
-
- devices = NULL;
-
- /* Allocate memory for our private device context. */
- if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
- sr_err("Device context malloc failed.");
- goto err_free_nothing;
- }
-
- /* Allocate memory for the incoming compressed samples. */
- if (!(devc->compressed_buf = g_try_malloc0(COMPRESSED_BUF_SIZE))) {
- sr_err("compressed_buf malloc failed.");
- goto err_free_devc;
- }
-
- /* Allocate memory for the uncompressed samples. */
- if (!(devc->sample_buf = g_try_malloc0(SAMPLE_BUF_SIZE))) {
- sr_err("sample_buf malloc failed.");
- goto err_free_compressed_buf;
- }
-
- /* Allocate memory for the FTDI context (ftdic) and initialize it. */
- if (!(devc->ftdic = ftdi_new())) {
- sr_err("Failed to initialize libftdi.");
- goto err_free_sample_buf;
- }
-
- /* Check for the device and temporarily open it. */
- ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID,
- USB_IPRODUCT, NULL);
- if (ret < 0) {
- /* Log errors, except for -3 ("device not found"). */
- if (ret != -3)
- sr_err("Failed to open device (%d): %s", ret,
- ftdi_get_error_string(devc->ftdic));
- goto err_free_ftdic;
- }
-
- /* Register the device with libsigrok. */
- sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING,
- USB_VENDOR_NAME, USB_MODEL_NAME, NULL);
- if (!sdi) {
- sr_err("Failed to create device instance.");
- goto err_close_ftdic;
- }
- sdi->driver = di;
- sdi->priv = devc;
-
- for (i = 0; channel_names[i]; i++) {
- if (!(ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
- channel_names[i])))
- return NULL;
- sdi->channels = g_slist_append(sdi->channels, ch);
- }
-
- devices = g_slist_append(devices, sdi);
- drvc->instances = g_slist_append(drvc->instances, sdi);
-
- /* Close device. We'll reopen it again when we need it. */
- scanaplus_close(devc);
-
- return devices;
-
-err_close_ftdic:
- scanaplus_close(devc);
-err_free_ftdic:
- ftdi_free(devc->ftdic); /* NOT free() or g_free()! */
-err_free_sample_buf:
- g_free(devc->sample_buf);
-err_free_compressed_buf:
- g_free(devc->compressed_buf);
-err_free_devc:
- g_free(devc);
-err_free_nothing:
-
- return NULL;
-}
-
-static GSList *dev_list(void)
-{
- return ((struct drv_context *)(di->priv))->instances;
-}
-
-static int dev_open(struct sr_dev_inst *sdi)
-{
- struct dev_context *devc;
- int ret;
-
- devc = sdi->priv;
-
- /* Select interface A, otherwise communication will fail. */
- ret = ftdi_set_interface(devc->ftdic, INTERFACE_A);
- if (ret < 0) {
- sr_err("Failed to set FTDI interface A (%d): %s", ret,
- ftdi_get_error_string(devc->ftdic));
- return SR_ERR;
- }
- sr_dbg("FTDI chip interface A set successfully.");
-
- /* Open the device. */
- ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID,
- USB_IPRODUCT, NULL);
- if (ret < 0) {
- sr_err("Failed to open device (%d): %s", ret,
- ftdi_get_error_string(devc->ftdic));
- return SR_ERR;
- }
- sr_dbg("FTDI device opened successfully.");
-
- /* Purge RX/TX buffers in the FTDI chip. */
- if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) {
- sr_err("Failed to purge FTDI RX/TX buffers (%d): %s.",
- ret, ftdi_get_error_string(devc->ftdic));
- goto err_dev_open_close_ftdic;
- }
- sr_dbg("FTDI chip buffers purged successfully.");
-
- /* Reset the FTDI bitmode. */
- ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_RESET);
- if (ret < 0) {
- sr_err("Failed to reset the FTDI chip bitmode (%d): %s.",
- ret, ftdi_get_error_string(devc->ftdic));
- goto err_dev_open_close_ftdic;
- }
- sr_dbg("FTDI chip bitmode reset successfully.");
-
- /* Set FTDI bitmode to "sync FIFO". */
- ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_SYNCFF);
- if (ret < 0) {
- sr_err("Failed to put FTDI chip into sync FIFO mode (%d): %s.",
- ret, ftdi_get_error_string(devc->ftdic));
- goto err_dev_open_close_ftdic;
- }
- sr_dbg("FTDI chip sync FIFO mode entered successfully.");
-
- /* Set the FTDI latency timer to 2. */
- ret = ftdi_set_latency_timer(devc->ftdic, 2);
- if (ret < 0) {
- sr_err("Failed to set FTDI latency timer (%d): %s.",
- ret, ftdi_get_error_string(devc->ftdic));
- goto err_dev_open_close_ftdic;
- }
- sr_dbg("FTDI chip latency timer set successfully.");
-
- /* Set the FTDI read data chunk size to 64kB. */
- ret = ftdi_read_data_set_chunksize(devc->ftdic, 64 * 1024);
- if (ret < 0) {
- sr_err("Failed to set FTDI read data chunk size (%d): %s.",
- ret, ftdi_get_error_string(devc->ftdic));
- goto err_dev_open_close_ftdic;
- }
- sr_dbg("FTDI chip read data chunk size set successfully.");
-
- /* Get the ScanaPLUS device ID from the FTDI EEPROM. */
- if ((ret = scanaplus_get_device_id(devc)) < 0) {
- sr_err("Failed to get ScanaPLUS device ID: %d.", ret);
- goto err_dev_open_close_ftdic;
- }
- sr_dbg("Received ScanaPLUS device ID successfully: %02x %02x %02x.",
- devc->devid[0], devc->devid[1], devc->devid[2]);
-
- sdi->status = SR_ST_ACTIVE;
-
- return SR_OK;
-
-err_dev_open_close_ftdic:
- scanaplus_close(devc);
- return SR_ERR;
-}
-
-static int dev_close(struct sr_dev_inst *sdi)
-{
- int ret;
- struct dev_context *devc;
-
- ret = SR_OK;
- devc = sdi->priv;
-
- if (sdi->status == SR_ST_ACTIVE) {
- sr_dbg("Status ACTIVE, closing device.");
- ret = scanaplus_close(devc);
- } else {
- sr_spew("Status not ACTIVE, nothing to do.");
- }
-
- sdi->status = SR_ST_INACTIVE;
-
- return ret;
-}
-
-static int cleanup(void)
-{
- return dev_clear();
-}
-
-static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
-{
- (void)sdi;
- (void)cg;
-
- switch (id) {
- case SR_CONF_SAMPLERATE:
- /* The ScanaPLUS samplerate is 100MHz and can't be changed. */
- *data = g_variant_new_uint64(SR_MHZ(100));
- break;
- default:
- return SR_ERR_NA;
- }
-
- return SR_OK;
-}
-
-static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
-{
- struct dev_context *devc;
-
- (void)cg;
-
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- devc = sdi->priv;
-
- switch (id) {
- case SR_CONF_SAMPLERATE:
- if (g_variant_get_uint64(data) != SR_MHZ(100)) {
- sr_err("ScanaPLUS only supports samplerate = 100MHz.");
- return SR_ERR_ARG;
- }
- /* Nothing to do, the ScanaPLUS samplerate is always 100MHz. */
- break;
- case SR_CONF_LIMIT_MSEC:
- if (g_variant_get_uint64(data) == 0)
- return SR_ERR_ARG;
- devc->limit_msec = g_variant_get_uint64(data);
- break;
- case SR_CONF_LIMIT_SAMPLES:
- if (g_variant_get_uint64(data) == 0)
- return SR_ERR_ARG;
- devc->limit_samples = g_variant_get_uint64(data);
- break;
- default:
- return SR_ERR_NA;
- }
-
- return SR_OK;
-}
-
-static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
-{
- GVariant *gvar;
- GVariantBuilder gvb;
-
- (void)sdi;
- (void)cg;
-
- switch (key) {
- case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
- hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
- break;
- case SR_CONF_SAMPLERATE:
- g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
- gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
- samplerates, ARRAY_SIZE(samplerates),
- sizeof(uint64_t));
- g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
- *data = g_variant_builder_end(&gvb);
- break;
- default:
- return SR_ERR_NA;
- }
-
- return SR_OK;
-}
-
-static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
-{
- int ret;
- struct dev_context *devc;
-
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- if (!(devc = sdi->priv))
- return SR_ERR_BUG;
-
- if (!devc->ftdic)
- return SR_ERR_BUG;
-
- /* TODO: Configure channels later (thresholds etc.). */
-
- devc->cb_data = cb_data;
-
- /* Properly reset internal variables before every new acquisition. */
- devc->compressed_bytes_ignored = 0;
- devc->samples_sent = 0;
- devc->bytes_received = 0;
-
- if ((ret = scanaplus_init(devc)) < 0)
- return ret;
-
- if ((ret = scanaplus_start_acquisition(devc)) < 0)
- return ret;
-
- /* Send header packet to the session bus. */
- std_session_send_df_header(sdi, LOG_PREFIX);
-
- /* Hook up a dummy handler to receive data from the device. */
- sr_session_source_add(sdi->session, -1, G_IO_IN, 0, scanaplus_receive_data, (void *)sdi);
-
- return SR_OK;
-}
-
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
-{
- struct sr_datafeed_packet packet;
-
- (void)cb_data;
-
- sr_dbg("Stopping acquisition.");
- sr_session_source_remove(sdi->session, -1);
-
- /* Send end packet to the session bus. */
- sr_dbg("Sending SR_DF_END.");
- packet.type = SR_DF_END;
- sr_session_send(sdi, &packet);
-
- return SR_OK;
-}
-
-SR_PRIV struct sr_dev_driver ikalogic_scanaplus_driver_info = {
- .name = "ikalogic-scanaplus",
- .longname = "IKALOGIC ScanaPLUS",
- .api_version = 1,
- .init = init,
- .cleanup = cleanup,
- .scan = scan,
- .dev_list = dev_list,
- .dev_clear = dev_clear,
- .config_get = config_get,
- .config_set = config_set,
- .config_list = config_list,
- .dev_open = dev_open,
- .dev_close = dev_close,
- .dev_acquisition_start = dev_acquisition_start,
- .dev_acquisition_stop = dev_acquisition_stop,
- .priv = NULL,
-};