*/
{ 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw",
- 0 },
+ 0, NULL, NULL},
/*
* CWAV USBee DX
* XZL-Studio DX
*/
{ 0x08a9, 0x0015, "CWAV", "USBee DX", NULL,
FIRMWARE_DIR "/fx2lafw-cwav-usbeedx.fw",
- DEV_CAPS_16BIT },
+ DEV_CAPS_16BIT, NULL, NULL },
/*
* CWAV USBee SX
*/
{ 0x08a9, 0x0009, "CWAV", "USBee SX", NULL,
FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw",
- 0 },
+ 0, NULL, NULL},
/*
* Saleae Logic
*/
{ 0x0925, 0x3881, "Saleae", "Logic", NULL,
FIRMWARE_DIR "/fx2lafw-saleae-logic.fw",
- 0 },
+ 0, NULL, NULL},
/*
* Default Cypress FX2 without EEPROM, e.g.:
*/
{ 0x04B4, 0x8613, "Cypress", "FX2", NULL,
FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw",
- DEV_CAPS_16BIT },
+ DEV_CAPS_16BIT, NULL, NULL },
/*
* Braintechnology USB-LPS
*/
{ 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL,
FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw",
- DEV_CAPS_16BIT },
+ DEV_CAPS_16BIT, NULL, NULL },
- { 0, 0, 0, 0, 0, 0, 0 }
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0 }
};
static const int32_t hwopts[] = {
static const int32_t hwcaps[] = {
SR_CONF_LOGIC_ANALYZER,
- SR_CONF_TRIGGER_TYPE,
+ SR_CONF_TRIGGER_MATCH,
SR_CONF_SAMPLERATE,
/* These are really implemented in the driver, not the hardware. */
NULL,
};
+static const int32_t soft_trigger_matches[] = {
+ SR_TRIGGER_ZERO,
+ SR_TRIGGER_ONE,
+ SR_TRIGGER_RISING,
+ SR_TRIGGER_FALLING,
+ SR_TRIGGER_EDGE,
+};
+
static const uint64_t samplerates[] = {
SR_KHZ(20),
SR_KHZ(25),
GSList *l, *devices, *conn_devices;
struct libusb_device_descriptor des;
libusb_device **devlist;
+ struct libusb_device_handle *hdl;
int devcnt, num_logic_channels, ret, i, j;
const char *conn;
+ char manufacturer[64], product[64];
drvc = di->priv;
continue;
}
+ if ((ret = libusb_open(devlist[i], &hdl)) < 0)
+ continue;
+
+ if (des.iManufacturer == 0) {
+ manufacturer[0] = '\0';
+ } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
+ des.iManufacturer, (unsigned char *) manufacturer,
+ sizeof(manufacturer))) < 0) {
+ sr_warn("Failed to get manufacturer string descriptor: %s.",
+ libusb_error_name(ret));
+ continue;
+ }
+
+ if (des.iProduct == 0) {
+ product[0] = '\0';
+ } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
+ des.iProduct, (unsigned char *) product,
+ sizeof(product))) < 0) {
+ sr_warn("Failed to get product string descriptor: %s.",
+ libusb_error_name(ret));
+ continue;
+ }
+
+ libusb_close(hdl);
+
prof = NULL;
for (j = 0; supported_fx2[j].vid; j++) {
if (des.idVendor == supported_fx2[j].vid &&
- des.idProduct == supported_fx2[j].pid) {
+ des.idProduct == supported_fx2[j].pid &&
+ (!supported_fx2[j].usb_manufacturer ||
+ !strcmp(manufacturer, supported_fx2[j].usb_manufacturer)) &&
+ (!supported_fx2[j].usb_manufacturer ||
+ !strcmp(product, supported_fx2[j].usb_product))) {
prof = &supported_fx2[j];
+ break;
}
}
if (!(drvc = di->priv))
return SR_OK;
-
ret = std_dev_clear(di, NULL);
g_free(drvc);
(void)cg;
+ if (!sdi)
+ return SR_ERR_ARG;
+
+ devc = sdi->priv;
+
switch (id) {
case SR_CONF_CONN:
- if (!sdi || !sdi->conn)
+ if (!sdi->conn)
return SR_ERR_ARG;
usb = sdi->conn;
if (usb->address == 255)
snprintf(str, 128, "%d.%d", usb->bus, usb->address);
*data = g_variant_new_string(str);
break;
+ case SR_CONF_LIMIT_SAMPLES:
+ *data = g_variant_new_uint64(devc->limit_samples);
+ break;
case SR_CONF_SAMPLERATE:
- if (!sdi)
- return SR_ERR;
- devc = sdi->priv;
*data = g_variant_new_uint64(devc->cur_samplerate);
break;
default:
(void)cg;
+ if (!sdi)
+ return SR_ERR_ARG;
+
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR;
devc = sdi->priv;
- if (id == SR_CONF_SAMPLERATE) {
- devc->cur_samplerate = g_variant_get_uint64(data);
- ret = SR_OK;
- } else if (id == SR_CONF_LIMIT_SAMPLES) {
- devc->limit_samples = g_variant_get_uint64(data);
- ret = SR_OK;
- } else {
- ret = SR_ERR_NA;
+ ret = SR_OK;
+
+ switch (id)
+ {
+ case SR_CONF_SAMPLERATE:
+ devc->cur_samplerate = g_variant_get_uint64(data);
+ break;
+ case SR_CONF_LIMIT_SAMPLES:
+ devc->limit_samples = g_variant_get_uint64(data);
+ break;
+ default:
+ ret = SR_ERR_NA;
}
return ret;
g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
*data = g_variant_builder_end(&gvb);
break;
- case SR_CONF_TRIGGER_TYPE:
- *data = g_variant_new_string(TRIGGER_TYPE);
+ case SR_CONF_TRIGGER_MATCH:
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ soft_trigger_matches, ARRAY_SIZE(soft_trigger_matches),
+ sizeof(int32_t));
break;
default:
return SR_ERR_NA;
struct dev_context *devc;
struct drv_context *drvc;
struct sr_usb_dev_inst *usb;
+ struct sr_trigger *trigger;
struct libusb_transfer *transfer;
unsigned int i, timeout, num_transfers;
int ret;
devc = sdi->priv;
usb = sdi->conn;
- /* Configures devc->trigger_* and devc->sample_wide */
- if (fx2lafw_configure_channels(sdi) != SR_OK) {
- sr_err("Failed to configure channels.");
- return SR_ERR;
- }
-
devc->cb_data = cb_data;
devc->sent_samples = 0;
devc->acq_aborted = FALSE;
devc->empty_transfer_count = 0;
+ if ((trigger = sr_session_trigger_get(sdi->session))) {
+ devc->stl = soft_trigger_logic_new(sdi, trigger);
+ devc->trigger_fired = FALSE;
+ } else
+ devc->trigger_fired = TRUE;
+
timeout = fx2lafw_get_timeout(devc);
num_transfers = fx2lafw_get_number_of_transfers(devc);
size = fx2lafw_get_buffer_size(devc);
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, usb->devhdl,
2 | LIBUSB_ENDPOINT_IN, buf, size,
- fx2lafw_receive_transfer, devc, timeout);
+ fx2lafw_receive_transfer, (void *)sdi, timeout);
if ((ret = libusb_submit_transfer(transfer)) != 0) {
sr_err("Failed to submit transfer: %s.",
libusb_error_name(ret));
devc->ctx = drvc->sr_ctx;
- usb_source_add(devc->ctx, timeout, receive_data, NULL);
+ usb_source_add(sdi->session, devc->ctx, timeout, receive_data, NULL);
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
projects / libsigrok.git / blobdiff