sr: adjust copyright year

[libsigrok.git] / hardware / common / ezusb.c

diff --git a/hardware/common/ezusb.c b/hardware/common/ezusb.c
index 587abe7fffc4413199c987e4d41c98ba02d33780..6a4f329778192d9c18a1741a7c850c99baafe878 100644 (file)
--- a/hardware/common/ezusb.c
+++ b/hardware/common/ezusb.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the sigrok project.
  *
- * Copyright (C) 2010 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,40 +23,44 @@
 
 #include <libusb.h>
 #include <glib.h>
+#include <glib/gstdio.h>
 #include <stdio.h>
 #include <errno.h>
 #include <string.h>
-#include "config.h"
+#include "sigrok.h"
+#include "sigrok-internal.h"
 
-int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
+SR_PRIV int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
 {
        int err;
        unsigned char buf[1];
 
-       g_message("setting CPU reset mode %s...", set_clear ? "on" : "off");
+       sr_info("setting CPU reset mode %s...", set_clear ? "on" : "off");
        buf[0] = set_clear ? 1 : 0;
        err = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR, 0xa0,
                                      0xe600, 0x0000, buf, 1, 100);
        if (err < 0)
-               g_warning("Unable to send control request: %d", err);
+               sr_err("Unable to send control request: %d", err);
 
        return err;
 }
 
-int ezusb_install_firmware(libusb_device_handle *hdl, const char *filename)
+SR_PRIV int ezusb_install_firmware(libusb_device_handle *hdl,
+                                  const char *filename)
 {
        FILE *fw;
        int offset, chunksize, err, result;
        unsigned char buf[4096];
 
-       g_message("Uploading firmware at %s", filename);
-       if ((fw = fopen(filename, "rb")) == NULL) {
-               g_warning("Unable to open firmware file %s for reading: %s",
-                         filename, strerror(errno));
-               return 1;
+       sr_info("Uploading firmware at %s", filename);
+       if ((fw = g_fopen(filename, "rb")) == NULL) {
+               sr_err("Unable to open firmware file %s for reading: %s",
+                      filename, strerror(errno));
+               return SR_ERR;
        }
 
-       result = offset = 0;
+       result = SR_OK;
+       offset = 0;
        while (1) {
                chunksize = fread(buf, 1, 4096, fw);
                if (chunksize == 0)
@@ -65,50 +69,58 @@ int ezusb_install_firmware(libusb_device_handle *hdl, const char *filename)
                                              LIBUSB_ENDPOINT_OUT, 0xa0, offset,
                                              0x0000, buf, chunksize, 100);
                if (err < 0) {
-                       g_warning("Unable to send firmware to device: %d", err);
-                       result = 1;
+                       sr_err("Unable to send firmware to device: %d", err);
+                       result = SR_ERR;
                        break;
                }
-               g_message("Uploaded %d bytes", chunksize);
+               sr_info("Uploaded %d bytes", chunksize);
                offset += chunksize;
        }
        fclose(fw);
-       g_message("Firmware upload done");
+       sr_info("Firmware upload done");
 
        return result;
 }
 
-int ezusb_upload_firmware(libusb_device *dev, int configuration,
-                         const char *filename)
+SR_PRIV int ezusb_upload_firmware(libusb_device *dev, int configuration,
+                                 const char *filename)
 {
        struct libusb_device_handle *hdl;
        int err;
 
-       g_message("uploading firmware to device on %d.%d",
+       sr_info("uploading firmware to device on %d.%d",
                  libusb_get_bus_number(dev), libusb_get_device_address(dev));
 
-       err = libusb_open(dev, &hdl);
-       if (err != 0) {
-               g_warning("failed to open device: %d", err);
-               return 1;
+       if ((err = libusb_open(dev, &hdl)) < 0) {
+               sr_err("failed to open device: %d", err);
+               return SR_ERR;
        }
 
-       err = libusb_set_configuration(hdl, configuration);
-       if (err != 0) {
-               g_warning("Unable to set configuration: %d", err);
-               return 1;
+/* Neither Windows/MinGW nor Darwin/Mac support these libusb-1.0 calls. */
+#if !defined(_WIN32) && !defined(__APPLE__)
+       if (libusb_kernel_driver_active(hdl, 0)) {
+               if ((err = libusb_detach_kernel_driver(hdl, 0)) < 0) {
+                       sr_err("failed to detach kernel driver: %d", err);
+                       return SR_ERR;
+               }
+       }
+#endif
+
+       if ((err = libusb_set_configuration(hdl, configuration)) < 0) {
+               sr_err("Unable to set configuration: %d", err);
+               return SR_ERR;
        }
 
        if ((ezusb_reset(hdl, 1)) < 0)
-               return 1;
+               return SR_ERR;
 
-       if (ezusb_install_firmware(hdl, filename) != 0)
-               return 1;
+       if (ezusb_install_firmware(hdl, filename) < 0)
+               return SR_ERR;
 
        if ((ezusb_reset(hdl, 0)) < 0)
-               return 1;
+               return SR_ERR;
 
        libusb_close(hdl);
 
-       return 0;
+       return SR_OK;
 }