build: Portability fixes.

[libsigrok.git] / hardware / common / ezusb.c

diff --git a/hardware/common/ezusb.c b/hardware/common/ezusb.c
index e765b83452ec2df5c311ebf904f0d344f36e01b3..044b4642705458d9c91b4b0c39b5a109a38a24dc 100644 (file)
--- a/hardware/common/ezusb.c
+++ b/hardware/common/ezusb.c
@@ -1,7 +1,7 @@
 /*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
  *
- * Copyright (C) 2010 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,62 +23,114 @@
 
 #include <libusb.h>
 #include <glib.h>
+#include <glib/gstdio.h>
 #include <stdio.h>
 #include <errno.h>
 #include <string.h>
-#include "config.h"
+#include "libsigrok.h"
+#include "libsigrok-internal.h"
 
-int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
+#define LOG_PREFIX "ezusb"
+
+SR_PRIV int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
 {
-       int err;
+       int ret;
        unsigned char buf[1];
 
-       g_message("setting CPU reset mode %s...", set_clear ? "on" : "off");
+       sr_info("setting CPU reset mode %s...",
+               set_clear ? "on" : "off");
        buf[0] = set_clear ? 1 : 0;
-       err = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR, 0xa0,
-                                                                 0xe600, 0x0000, buf, 1, 100);
-       if(err < 0)
-               g_warning("Unable to send control request: %d", err);
+       ret = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR, 0xa0,
+                                     0xe600, 0x0000, buf, 1, 100);
+       if (ret < 0)
+               sr_err("Unable to send control request: %s.",
+                               libusb_error_name(ret));
 
-       return err;
+       return ret;
 }
 
-
-int ezusb_install_firmware(libusb_device_handle *hdl, const char *filename)
+SR_PRIV int ezusb_install_firmware(libusb_device_handle *hdl,
+                                  const char *filename)
 {
        FILE *fw;
-       int offset, chunksize, err, result;
+       int offset, chunksize, ret, result;
        unsigned char buf[4096];
 
-       g_message("Uploading firmware at %s", filename);
-       if((fw = fopen(filename, "r")) == NULL)
-       {
-               g_warning("Unable to open firmware file %s for reading: %s", filename, strerror(errno));
-               return 1;
+       sr_info("Uploading firmware at %s", filename);
+       if ((fw = g_fopen(filename, "rb")) == NULL) {
+               sr_err("Unable to open firmware file %s for reading: %s",
+                      filename, strerror(errno));
+               return SR_ERR;
        }
 
-       result = 0;
+       result = SR_OK;
        offset = 0;
-       while(1)
-       {
+       while (1) {
                chunksize = fread(buf, 1, 4096, fw);
-               if(chunksize == 0)
+               if (chunksize == 0)
                        break;
-               err = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT, 0xa0,
-                                                                         offset, 0x0000, buf, chunksize, 100);
-               if(err < 0)
-               {
-                       g_warning("Unable to send firmware to device: %d", err);
-                       result = 1;
+               ret = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR |
+                                             LIBUSB_ENDPOINT_OUT, 0xa0, offset,
+                                             0x0000, buf, chunksize, 100);
+               if (ret < 0) {
+                       sr_err("Unable to send firmware to device: %s.",
+                                       libusb_error_name(ret));
+                       result = SR_ERR;
                        break;
                }
-               g_message("Uploaded %d bytes", chunksize);
+               sr_info("Uploaded %d bytes", chunksize);
                offset += chunksize;
        }
        fclose(fw);
-       g_message("Firmware upload done");
+       sr_info("Firmware upload done");
 
        return result;
 }
 
+SR_PRIV int ezusb_upload_firmware(libusb_device *dev, int configuration,
+                                 const char *filename)
+{
+       struct libusb_device_handle *hdl;
+       int ret;
+
+       sr_info("uploading firmware to device on %d.%d",
+               libusb_get_bus_number(dev), libusb_get_device_address(dev));
+
+       if ((ret = libusb_open(dev, &hdl)) < 0) {
+               sr_err("failed to open device: %s.", libusb_error_name(ret));
+               return SR_ERR;
+       }
+
+/*
+ * The libusbx darwin backend is broken: it can report a kernel driver being
+ * active, but detaching it always returns an error.
+ */
+#if !defined(__APPLE__)
+       if (libusb_kernel_driver_active(hdl, 0) == 1) {
+               if ((ret = libusb_detach_kernel_driver(hdl, 0)) < 0) {
+                       sr_err("failed to detach kernel driver: %s",
+                                       libusb_error_name(ret));
+                       return SR_ERR;
+               }
+       }
+#endif
+
+       if ((ret = libusb_set_configuration(hdl, configuration)) < 0) {
+               sr_err("Unable to set configuration: %s",
+                               libusb_error_name(ret));
+               return SR_ERR;
+       }
+
+       if ((ezusb_reset(hdl, 1)) < 0)
+               return SR_ERR;
 
+       if (ezusb_install_firmware(hdl, filename) < 0)
+               return SR_ERR;
+
+       if ((ezusb_reset(hdl, 0)) < 0)
+               return SR_ERR;
+
+       libusb_close(hdl);
+
+       return SR_OK;
+}