/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
* Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "libsigrok.h"
#include "libsigrok-internal.h"
-/* Message logging helpers with driver-specific prefix string. */
-#define DRIVER_LOG_DOMAIN "fs9721: "
-#define sr_log(l, s, args...) sr_log(l, DRIVER_LOG_DOMAIN s, ## args)
-#define sr_spew(s, args...) sr_spew(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_dbg(s, args...) sr_dbg(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_info(s, args...) sr_info(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_warn(s, args...) sr_warn(DRIVER_LOG_DOMAIN s, ## args)
-#define sr_err(s, args...) sr_err(DRIVER_LOG_DOMAIN s, ## args)
+#define LOG_PREFIX "fs9721"
static int parse_digit(uint8_t b)
{
case 0x3f:
return 9;
default:
- sr_err("Invalid digit byte: 0x%02x.", b);
+ sr_dbg("Invalid digit byte: 0x%02x.", b);
return -1;
}
}
-/**
- * Parse the numerical value from a protocol packet.
- *
- * @param buf Buffer containing the 14-byte protocol packet.
- * @param result Pointer to a float variable. That variable will contain the
- * result value upon parsing success.
- *
- * @return SR_OK upon success, SR_ERR upon failure. Upon errors, the result
- * variable contents are undefined and should not be used.
- */
+static gboolean sync_nibbles_valid(const uint8_t *buf)
+{
+ int i;
+
+ /* Check the synchronization nibbles, and make sure they all match. */
+ for (i = 0; i < FS9721_PACKET_SIZE; i++) {
+ if (((buf[i] >> 4) & 0x0f) != (i + 1)) {
+ sr_dbg("Sync nibble in byte %d (0x%02x) is invalid.",
+ i, buf[i]);
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
+
+static gboolean flags_valid(const struct fs9721_info *info)
+{
+ int count;
+
+ /* Does the packet have more than one multiplier? */
+ count = 0;
+ count += (info->is_nano) ? 1 : 0;
+ count += (info->is_micro) ? 1 : 0;
+ count += (info->is_milli) ? 1 : 0;
+ count += (info->is_kilo) ? 1 : 0;
+ count += (info->is_mega) ? 1 : 0;
+ if (count > 1) {
+ sr_dbg("More than one multiplier detected in packet.");
+ return FALSE;
+ }
+
+ /* Does the packet "measure" more than one type of value? */
+ count = 0;
+ count += (info->is_hz) ? 1 : 0;
+ count += (info->is_ohm) ? 1 : 0;
+ count += (info->is_farad) ? 1 : 0;
+ count += (info->is_ampere) ? 1 : 0;
+ count += (info->is_volt) ? 1 : 0;
+ count += (info->is_percent) ? 1 : 0;
+ if (count > 1) {
+ sr_dbg("More than one measurement type detected in packet.");
+ return FALSE;
+ }
+
+ /* Both AC and DC set? */
+ if (info->is_ac && info->is_dc) {
+ sr_dbg("Both AC and DC flags detected in packet.");
+ return FALSE;
+ }
+
+ /* RS232 flag not set? */
+ if (!info->is_rs232) {
+ sr_dbg("No RS232 flag detected in packet.");
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
static int parse_value(const uint8_t *buf, float *result)
{
int i, sign, intval = 0, digits[4];
intval += digits[i];
}
- /* Store the value in a float variable. */
floatval = (float)intval;
/* Decimal point position. */
return SR_OK;
}
-/**
- * Parse various flags in a protocol packet.
- *
- * @param buf Buffer containing the 14-byte protocol packet.
- * @param floatval Pointer to a float variable which should contain the value
- * parsed using parse_value(). That variable will be modified
- * in-place depending on the flags in the protocol packet.
- * @param analog Pointer to a struct sr_datafeed_analog. The struct will be
- * filled with the relevant data according to the flags in the
- * protocol packet.
- *
- * @return SR_OK upon success, SR_ERR upon failure. Upon errors, the 'floatval'
- * and 'analog' variable contents are undefined and should not be used.
- */
-static int parse_flags(const uint8_t *buf, float *floatval,
- struct sr_datafeed_analog *analog)
+static void parse_flags(const uint8_t *buf, struct fs9721_info *info)
{
- gboolean is_ac, is_dc, is_auto, is_rs232, is_micro, is_nano, is_kilo;
- gboolean is_diode, is_milli, is_percent, is_mega, is_beep, is_farad;
- gboolean is_ohm, is_rel, is_hold, is_ampere, is_volt, is_hz, is_bat;
- gboolean is_c2c1_11, is_c2c1_10, is_c2c1_01, is_c2c1_00;
-
/* Byte 0: LCD SEG1 */
- is_ac = (buf[0] & (1 << 3)) != 0;
- is_dc = (buf[0] & (1 << 2)) != 0;
- is_auto = (buf[0] & (1 << 1)) != 0;
- is_rs232 = (buf[0] & (1 << 0)) != 0;
+ info->is_ac = (buf[0] & (1 << 3)) != 0;
+ info->is_dc = (buf[0] & (1 << 2)) != 0;
+ info->is_auto = (buf[0] & (1 << 1)) != 0;
+ info->is_rs232 = (buf[0] & (1 << 0)) != 0;
+
+ /* Byte 1: LCD SEG2 */
+ info->is_sign = (buf[1] & (1 << 3)) != 0;
/* Byte 9: LCD SEG10 */
- is_micro = (buf[9] & (1 << 3)) != 0;
- is_nano = (buf[9] & (1 << 2)) != 0;
- is_kilo = (buf[9] & (1 << 1)) != 0;
- is_diode = (buf[9] & (1 << 0)) != 0;
+ info->is_micro = (buf[9] & (1 << 3)) != 0;
+ info->is_nano = (buf[9] & (1 << 2)) != 0;
+ info->is_kilo = (buf[9] & (1 << 1)) != 0;
+ info->is_diode = (buf[9] & (1 << 0)) != 0;
/* Byte 10: LCD SEG11 */
- is_milli = (buf[10] & (1 << 3)) != 0;
- is_percent = (buf[10] & (1 << 2)) != 0;
- is_mega = (buf[10] & (1 << 1)) != 0;
- is_beep = (buf[10] & (1 << 0)) != 0;
+ info->is_milli = (buf[10] & (1 << 3)) != 0;
+ info->is_percent = (buf[10] & (1 << 2)) != 0;
+ info->is_mega = (buf[10] & (1 << 1)) != 0;
+ info->is_beep = (buf[10] & (1 << 0)) != 0;
/* Byte 11: LCD SEG12 */
- is_farad = (buf[11] & (1 << 3)) != 0;
- is_ohm = (buf[11] & (1 << 2)) != 0;
- is_rel = (buf[11] & (1 << 1)) != 0;
- is_hold = (buf[11] & (1 << 0)) != 0;
+ info->is_farad = (buf[11] & (1 << 3)) != 0;
+ info->is_ohm = (buf[11] & (1 << 2)) != 0;
+ info->is_rel = (buf[11] & (1 << 1)) != 0;
+ info->is_hold = (buf[11] & (1 << 0)) != 0;
/* Byte 12: LCD SEG13 */
- is_ampere = (buf[12] & (1 << 3)) != 0;
- is_volt = (buf[12] & (1 << 2)) != 0;
- is_hz = (buf[12] & (1 << 1)) != 0;
- is_bat = (buf[12] & (1 << 0)) != 0;
+ info->is_ampere = (buf[12] & (1 << 3)) != 0;
+ info->is_volt = (buf[12] & (1 << 2)) != 0;
+ info->is_hz = (buf[12] & (1 << 1)) != 0;
+ info->is_bat = (buf[12] & (1 << 0)) != 0;
/* Byte 13: LCD SEG14 */
- is_c2c1_11 = (buf[13] & (1 << 3)) != 0;
- is_c2c1_10 = (buf[13] & (1 << 2)) != 0;
- is_c2c1_01 = (buf[13] & (1 << 1)) != 0;
- is_c2c1_00 = (buf[13] & (1 << 0)) != 0;
+ info->is_c2c1_11 = (buf[13] & (1 << 3)) != 0;
+ info->is_c2c1_10 = (buf[13] & (1 << 2)) != 0;
+ info->is_c2c1_01 = (buf[13] & (1 << 1)) != 0;
+ info->is_c2c1_00 = (buf[13] & (1 << 0)) != 0;
+}
+static void handle_flags(struct sr_datafeed_analog *analog, float *floatval,
+ const struct fs9721_info *info)
+{
/* Factors */
- if (is_nano)
+ if (info->is_nano)
*floatval /= 1000000000;
- if (is_micro)
+ if (info->is_micro)
*floatval /= 1000000;
- if (is_milli)
+ if (info->is_milli)
*floatval /= 1000;
- if (is_kilo)
+ if (info->is_kilo)
*floatval *= 1000;
- if (is_mega)
+ if (info->is_mega)
*floatval *= 1000000;
/* Measurement modes */
- if (is_volt) {
+ if (info->is_volt) {
analog->mq = SR_MQ_VOLTAGE;
analog->unit = SR_UNIT_VOLT;
}
- if (is_ampere) {
+ if (info->is_ampere) {
analog->mq = SR_MQ_CURRENT;
analog->unit = SR_UNIT_AMPERE;
}
- if (is_ohm) {
+ if (info->is_ohm) {
analog->mq = SR_MQ_RESISTANCE;
analog->unit = SR_UNIT_OHM;
}
- if (is_hz) {
+ if (info->is_hz) {
analog->mq = SR_MQ_FREQUENCY;
analog->unit = SR_UNIT_HERTZ;
}
- if (is_farad) {
+ if (info->is_farad) {
analog->mq = SR_MQ_CAPACITANCE;
analog->unit = SR_UNIT_FARAD;
}
- if (is_beep) {
+ if (info->is_beep) {
analog->mq = SR_MQ_CONTINUITY;
analog->unit = SR_UNIT_BOOLEAN;
- *floatval = (*floatval < 0.0) ? 0.0 : 1.0;
+ *floatval = (*floatval == INFINITY) ? 0.0 : 1.0;
}
- if (is_diode) {
+ if (info->is_diode) {
analog->mq = SR_MQ_VOLTAGE;
analog->unit = SR_UNIT_VOLT;
}
- if (is_percent) {
+ if (info->is_percent) {
analog->mq = SR_MQ_DUTY_CYCLE;
analog->unit = SR_UNIT_PERCENTAGE;
}
/* Measurement related flags */
- if (is_ac)
+ if (info->is_ac)
analog->mqflags |= SR_MQFLAG_AC;
- if (is_dc)
+ if (info->is_dc)
analog->mqflags |= SR_MQFLAG_DC;
- if (is_auto)
+ if (info->is_auto)
analog->mqflags |= SR_MQFLAG_AUTORANGE;
- if (is_hold)
+ if (info->is_diode)
+ analog->mqflags |= SR_MQFLAG_DIODE;
+ if (info->is_hold)
analog->mqflags |= SR_MQFLAG_HOLD;
- if (is_rel)
+ if (info->is_rel)
analog->mqflags |= SR_MQFLAG_RELATIVE;
/* Other flags */
- if (is_rs232)
+ if (info->is_rs232)
sr_spew("RS232 enabled.");
- if (is_bat)
+ if (info->is_bat)
sr_spew("Battery is low.");
- if (is_c2c1_00)
+ if (info->is_c2c1_00)
sr_spew("User-defined LCD symbol 0 is active.");
- if (is_c2c1_01)
+ if (info->is_c2c1_01)
sr_spew("User-defined LCD symbol 1 is active.");
- if (is_c2c1_10)
+ if (info->is_c2c1_10)
sr_spew("User-defined LCD symbol 2 is active.");
- if (is_c2c1_11)
+ if (info->is_c2c1_11)
sr_spew("User-defined LCD symbol 3 is active.");
+}
- return SR_OK;
+SR_PRIV gboolean sr_fs9721_packet_valid(const uint8_t *buf)
+{
+ struct fs9721_info info;
+
+ parse_flags(buf, &info);
+
+ return (sync_nibbles_valid(buf) && flags_valid(&info));
}
/**
* Parse a protocol packet.
*
- * @param buf Buffer containing the 14-byte protocol packet.
- * @param floatval Pointer to a float variable. That variable will be modified
- * in-place depending on the protocol packet.
+ * @param buf Buffer containing the 14-byte protocol packet. Must not be NULL.
+ * @param floatval Pointer to a float variable. That variable will contain the
+ * result value upon parsing success. Mut not be NULL.
* @param analog Pointer to a struct sr_datafeed_analog. The struct will be
* filled with data according to the protocol packet.
+ * Must not be NULL.
+ * @param info Pointer to a struct fs9721_info. The struct will be filled
+ * with data according to the protocol packet. Must not be NULL.
*
* @return SR_OK upon success, SR_ERR upon failure. Upon errors, the
* 'analog' variable contents are undefined and should not be used.
*/
-SR_PRIV int sr_dmm_parse_fs9721(const uint8_t *buf, float *floatval,
- struct sr_datafeed_analog *analog)
+SR_PRIV int sr_fs9721_parse(const uint8_t *buf, float *floatval,
+ struct sr_datafeed_analog *analog, void *info)
{
int ret;
+ struct fs9721_info *info_local;
+
+ info_local = (struct fs9721_info *)info;
if ((ret = parse_value(buf, floatval)) != SR_OK) {
- sr_err("Error parsing value: %d.", ret);
+ sr_dbg("Error parsing value: %d.", ret);
return ret;
}
- if ((ret = parse_flags(buf, floatval, analog)) != SR_OK) {
- sr_err("Error parsing flags: %d.", ret);
- return ret;
- }
+ parse_flags(buf, info_local);
+ handle_flags(analog, floatval, info_local);
return SR_OK;
}
+
+SR_PRIV void sr_fs9721_00_temp_c(struct sr_datafeed_analog *analog, void *info)
+{
+ struct fs9721_info *info_local;
+
+ info_local = (struct fs9721_info *)info;
+
+ /* User-defined FS9721_LP3 flag 'c2c1_00' means temperature (C). */
+ if (info_local->is_c2c1_00) {
+ analog->mq = SR_MQ_TEMPERATURE;
+ analog->unit = SR_UNIT_CELSIUS;
+ }
+}
+
+SR_PRIV void sr_fs9721_01_temp_c(struct sr_datafeed_analog *analog, void *info)
+{
+ struct fs9721_info *info_local;
+
+ info_local = (struct fs9721_info *)info;
+
+ /* User-defined FS9721_LP3 flag 'c2c1_01' means temperature (C). */
+ if (info_local->is_c2c1_01) {
+ analog->mq = SR_MQ_TEMPERATURE;
+ analog->unit = SR_UNIT_CELSIUS;
+ }
+}
+
+SR_PRIV void sr_fs9721_10_temp_c(struct sr_datafeed_analog *analog, void *info)
+{
+ struct fs9721_info *info_local;
+
+ info_local = (struct fs9721_info *)info;
+
+ /* User-defined FS9721_LP3 flag 'c2c1_10' means temperature (C). */
+ if (info_local->is_c2c1_10) {
+ analog->mq = SR_MQ_TEMPERATURE;
+ analog->unit = SR_UNIT_CELSIUS;
+ }
+}
+
+SR_PRIV void sr_fs9721_01_10_temp_f_c(struct sr_datafeed_analog *analog, void *info)
+{
+ struct fs9721_info *info_local;
+
+ info_local = (struct fs9721_info *)info;
+
+ /* User-defined FS9721_LP3 flag 'c2c1_01' means temperature (F). */
+ if (info_local->is_c2c1_01) {
+ analog->mq = SR_MQ_TEMPERATURE;
+ analog->unit = SR_UNIT_FAHRENHEIT;
+ }
+
+ /* User-defined FS9721_LP3 flag 'c2c1_10' means temperature (C). */
+ if (info_local->is_c2c1_10) {
+ analog->mq = SR_MQ_TEMPERATURE;
+ analog->unit = SR_UNIT_CELSIUS;
+ }
+}
+
+SR_PRIV void sr_fs9721_max_c_min(struct sr_datafeed_analog *analog, void *info)
+{
+ struct fs9721_info *info_local;
+
+ info_local = (struct fs9721_info *)info;
+
+ /* User-defined FS9721_LP3 flag 'c2c1_00' means MAX. */
+ if (info_local->is_c2c1_00)
+ analog->mqflags |= SR_MQFLAG_MAX;
+
+ /* User-defined FS9721_LP3 flag 'c2c1_01' means temperature (C). */
+ if (info_local->is_c2c1_01) {
+ analog->mq = SR_MQ_TEMPERATURE;
+ analog->unit = SR_UNIT_CELSIUS;
+ }
+
+ /* User-defined FS9721_LP3 flag 'c2c1_11' means MIN. */
+ if (info_local->is_c2c1_11)
+ analog->mqflags |= SR_MQFLAG_MIN;
+
+}
projects / libsigrok.git / blobdiff