strcasecmp() is defined in strings.h.

[libsigrok.git] / configure.ac

diff --git a/configure.ac b/configure.ac
index 595dafe25623ed48b822b095bbc281b59e6f21e3..bc9ce7128aaab2c50e4a3cd3fa98b39cb964ea4a 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -33,9 +33,6 @@ AC_CONFIG_HEADER([config.h])
 AC_CONFIG_MACRO_DIR([autostuff])
 AC_CONFIG_AUX_DIR([autostuff])
 
-# We require this to know the target settings if we're cross-compiling.
-AC_CANONICAL_SYSTEM
-
 # We require at least automake 1.11 (needed for 'silent rules').
 AM_INIT_AUTOMAKE([1.11 -Wall -Werror subdir-objects check-news color-tests])
 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
@@ -109,6 +106,7 @@ DRIVER([Agilent DMM], [agilent-dmm])
 DRIVER([Appa 55II], [appa-55ii])
 DRIVER([ASIX SIGMA/SIGMA2], [asix-sigma])
 DRIVER([Atten PPS3xxx], [atten-pps3xxx])
+DRIVER([BayLibre ACME], [baylibre-acme])
 DRIVER([BeagleLogic], [beaglelogic])
 DRIVER([Brymen BM86x], [brymen-bm86x])
 DRIVER([Brymen DMM], [brymen-dmm])
@@ -275,7 +273,7 @@ PKG_CHECK_MODULES([libzip], [libzip >= 0.10],
 # libserialport is only needed for some hardware drivers. Disable the
 # respective drivers if it is not found.
 if test "x$enable_libserialport" != "xno"; then
-       PKG_CHECK_MODULES([libserialport], [libserialport >= 0.2.0],
+       PKG_CHECK_MODULES([libserialport], [libserialport >= 0.1.1],
                [have_libserialport="yes"; LIB_CFLAGS="$LIB_CFLAGS $libserialport_CFLAGS";
                LIBS="$LIBS $libserialport_LIBS";
                SR_PKGLIBS="$SR_PKGLIBS libserialport"],
@@ -430,6 +428,12 @@ AM_CONDITIONAL(HAVE_CHECK, test x"$have_check" = "xyes")
 # build it if these headers aren't available.
 AC_CHECK_HEADERS([sys/mman.h sys/ioctl.h], [], [HW_BEAGLELOGIC="no"])
 
+# The ACME driver can only be built for Linux.
+case "$host" in
+       *linux*) ;;
+       *) HW_BAYLIBRE_ACME="no" ;;
+esac
+
 AC_SUBST(SR_PKGLIBS)
 
 CFLAGS="$CFLAGS -Iinclude/libsigrok -I${srcdir}/include/libsigrok $LIB_CFLAGS"
@@ -473,6 +477,7 @@ DRIVER2([HW_AGILENT_DMM], [$HW_AGILENT_DMM], [HAVE_HW_AGILENT_DMM])
 DRIVER2([HW_APPA_55II], [$HW_APPA_55II], [HAVE_HW_APPA_55II])
 DRIVER2([HW_ASIX_SIGMA], [$HW_ASIX_SIGMA], [HAVE_HW_ASIX_SIGMA])
 DRIVER2([HW_ATTEN_PPS3XXX], [$HW_ATTEN_PPS3XXX], [HAVE_HW_ATTEN_PPS3XXX])
+DRIVER2([HW_BAYLIBRE_ACME], [$HW_BAYLIBRE_ACME], [HAVE_HW_BAYLIBRE_ACME])
 DRIVER2([HW_BEAGLELOGIC], [$HW_BEAGLELOGIC], [HAVE_HW_BEAGLELOGIC])
 DRIVER2([HW_BRYMEN_BM86X], [$HW_BRYMEN_BM86X], [HAVE_HW_BRYMEN_BM86X])
 DRIVER2([HW_BRYMEN_DMM], [$HW_BRYMEN_DMM], [HAVE_HW_BRYMEN_DMM])
@@ -557,7 +562,7 @@ echo "Detected libraries:"
 echo
 
 # Note: This only works for libs with pkg-config integration.
-for lib in "glib-2.0 >= 2.32.0" "libzip >= 0.10" "libserialport >= 0.2.0" \
+for lib in "glib-2.0 >= 2.32.0" "libzip >= 0.10" "libserialport >= 0.1.1" \
        "librevisa >= 0.0.20130412" "libusb-1.0 >= 1.0.16" "libftdi >= 0.16" \
        "libftdi1 >= 1.0" "libgpib" "glibmm-2.4 >= 2.32.0" \
        "pygobject-3.0 >= 3.0.0" "check >= 0.9.4"