Constify a few arrays and variables.

[libsigrok.git] / README.devices

diff --git a/README.devices b/README.devices
index db651faa72ec6d9a46fb20154602423021bfb97f..11b54bf581b9cdb70dd41b57371c7d34a5545fc0 100644 (file)
--- a/README.devices
+++ b/README.devices
@@ -75,6 +75,7 @@ The following drivers/devices do not need any firmware upload:
  - mic-985xx (including all subdrivers)
  - norma-dmm
  - openbench-logic-sniffer
+ - pipistrello-ols
  - rigol-ds
  - serial-dmm (including all subdrivers)
  - teleinfo
@@ -82,6 +83,7 @@ The following drivers/devices do not need any firmware upload:
  - uni-t-dmm (including all subdrivers)
  - uni-t-ut32x
  - victor-dmm
+ - yokogawa-dlm
  - zeroplus-logic-cube
 
 
@@ -133,12 +135,14 @@ The following drivers/devices do not require a serial port specification:
  - ikalogic-scanaplus
  - kecheng-kc-330b
  - lascar-el-usb
+ - pipistrello-ols
  - rigol-ds (USBTMC or TCP)
  - saleae-logic16
  - sysclk-lwla
  - uni-t-dmm (including all subdrivers)
  - uni-t-ut32x
  - victor-dmm
+ - yokogawa-dlm (USBTMC or TCP)
  - zeroplus-logic-cube
 
 
@@ -315,12 +319,15 @@ a short list for convenience:
  - Tenma 72-7750: Briefly press the "RS232C" button.
  - UNI-T UT60G: Briefly press the "RS232C" button.
  - UNI-T UT61B/C/D: Press the "REL/RS232/USB" button for roughly 1 second.
+ - UNI-T UT71x: Press the "SEND/-/MAXMIN" button for roughly 1 second.
+   Briefly pressing the "EXIT" button leaves this mode again.
  - UNI-T UT325: Briefly press the "SEND" button (as per manual). However, it
    appears that in practice you don't have to press the button (at least on
    some versions of the device), simply connect the device via USB.
  - V&A VA18B/VA40B: Keep the "Hz/DUTY" key pressed while powering on the DMM.
  - Victor 70C/86C: Press the "REL/RS232" button for roughly 1 second.
  - Voltcraft VC-830: Press the "REL/PC" button for roughly 2 seconds.
+ - Voltcraft VC-870: Press the "REL/PC" button for roughly 1 second.
 
 
 ChronoVu LA8/LA16 USB VID/PIDs