- scpi-pps
- serial-dmm (including all subdrivers)
- serial-lcr (including all subdrivers)
+ - siglent-sds
- teleinfo
- testo
- tondaj-sl-814
$ sigrok-cli --driver <somedriver>:conn=/dev/ttyUSB0 ...
-The following drivers/devices require a serial port specification:
+The following drivers/devices require a serial port specification. Some of
+the drivers implement a default for the connection. Some of the drivers
+can auto-detect USB connected devices.
- agilent-dmm
- appa-55ii
- yokogawa-dlm (USBTMC or TCP)
- zeroplus-logic-cube
+Beyond strict serial communication over COM ports (e.g. /dev/ttyUSB0), the
+conn= property can also address specific USB devices, as well as specify TCP
+or VXI communication parameters. See these examples:
+
+ $ sigrok-cli --driver <somedriver>:conn=<vid>.<pid> ...
+ $ sigrok-cli --driver <somedriver>:conn=tcp-raw/<ipaddr>/<port> ...
+ $ sigrok-cli --driver <somedriver>:conn=vxi/<ipaddr> ...
+ $ sigrok-cli --driver <somedriver>:conn=usbtmc/<bus>.<addr> ...
+
+The following drivers/devices accept network communication parameters:
+
+ - hameg-hmo
+ - rigol-ds
+ - scpi-dmm
+ - siglent-sds
+ - yokogawa-dlm
+
Specifying serial port parameters
---------------------------------
UNI-T multimeters (and rebranded devices, e.g. some Voltcraft models) can
ship with different PC connectivity cables:
+ - UT-D02 (RS232 cable)
- UT-D04 (USB/HID cable with Hoitek HE2325U chip, USB VID/PID 04fa:2490)
- UT-D04 (USB/HID cable with WCH CH9325 chip, USB VID/PID 1a86:e008)
- - UT-D02 (RS232 cable)
The above cables are all physically compatible (same IR connector shape)
with all/most currently known UNI-T multimeters. For example, you can
- BBC Goertz Metrawatt M2110: Briefly press the "Start/Reset" button on the
interface panel on top.
+ - Brymen BM257s: Press HOLD during power-on.
- Digitek DT4000ZC: Briefly press the "RS232" button.
+ - EEVBlog 121GW: Hold "1ms PEAK" until the "BT" indicator is shown.
- Gossen Metrawatt Metrahit 1x/2x devices, driver gmc-mh-1x-2x-rs232:
- Power on the device with the "DATA" button pressed.
- Metrahit 2x devices must be configured for the respective interface type.