'sigrok-firmware' repository/project under a license which allows us
to redistribute them.
+ - dreamsourcelab-dslogic: The DreamSourceLab DSLogic/DSCope device series
+ requires various firmware files and FPGA bitstream files.
+ These can be extracted/downloaded from the vendor's GitHub repo using a
+ tool from our 'sigrok-util' repository/project.
+
- fx2lafw: Logic analyzers based on the Cypress FX2(LP) chip need the
firmware files from the 'sigrok-firmware-fx2lafw' repository/project.
The firmware is written from scratch and licensed under the GNU GPLv2+.
These can be extracted from the vendor's Linux application using a tool
from our 'sigrok-util' repository/project.
+ - saleae-logic-pro: The Saleae Logic Pro 16 needs a firmware file for the
+ Cypress FX3 chip in the device, as well as an FPGA bitstream file.
+ These can be extracted from the vendor's Linux application using a tool
+ from our 'sigrok-util' repository/project.
+
- sysclk-lwla:
- The Sysclk LWLA1034 requires various bitstream files.
These can be extracted from the vendor's Windows drivers using a tool
from our 'sigrok-util' repository/project.
+ - sysclk-sla5032: The Sysclk SLA5032 needs an FPGA bitstream file.
+ This file can be copied (and renamed) from the Windows vendor software
+ installation directory. Details:
+
+ https://sigrok.org/wiki/Sysclk_SLA5032#Firmware
+
The following drivers/devices do not need any firmware upload:
- agilent-dmm
- atten-pps3xxx
- baylibre-acme
- beaglelogic
- - brymen-bm86x
- brymen-dmm
- cem-dt-885x
- center-3xx (including all subdrivers)
- colead-slm
- conrad-digi-35-cpu
- demo
+ - fluke-45
- fluke-dmm
- ftdi-la
- gmc-mh-1x-2x (including all subdrivers)
- gwinstek-gds-800
+ - gwinstek-gpd
- hameg-hmo
+ - hantek-4032l
- hp-3457a
+ - hp-3478a
- hung-chang-dso-2100
- ikalogic-scanalogic2
- ikalogic-scanaplus
+ - ipdbg-la
- kecheng-kc-330b
- kern-scale
+ - korad-kaxxxxp
- lascar-el-usb
+ - lecroy-xstream
- link-mso19
- manson-hcs-3xxx
- maynuo-m97
- mic-985xx (including all subdrivers)
- - motech-lps-30x
+ - microchip-pickit2
- mooshimeter-dmm
+ - motech-lps-30x
- norma-dmm
- openbench-logic-sniffer
- pce-322a
- pipistrello-ols
+ - rdtech-dps
- rigol-ds
+ - rohde-schwarz-sme-0x
+ - scpi-dmm
- scpi-pps
- serial-dmm (including all subdrivers)
- serial-lcr (including all subdrivers)
- tondaj-sl-814
- uni-t-dmm (including all subdrivers)
- uni-t-ut32x
- - victor-dmm
- yokogawa-dlm
- zeroplus-logic-cube
+ - zketech-ebd-usb
Specifying serial ports
conn=hid[/<chip>]/usb=<bus>.<dev>[.<if>]
conn=hid[/<chip>]/raw=<path>
conn=hid[/<chip>]/sn=<serno>
- chip can be: ch9325, cp2110
+ chip can be: bu86x, ch9325, cp2110, victor
path may contain slashes
path and serno are "greedy" (span to the end of the spec)
- Bluetooth Classic and Bluetooth Low Energy (BLE):
<name>:conn=<spec>" example, that is why the dense form and the use
of dashes for separation are supported)
-The following drivers/devices require a serial port specification. Some of
-the drivers implement a default for the connection. Some of the drivers
-can auto-detect USB connected devices.
-
- - agilent-dmm
- - appa-55ii
- - atten-pps3xxx
- - brymen-dmm
- - cem-dt-885x
- - center-3xx (including all subdrivers)
- - colead-slm
- - conrad-digi-35-cpu
- - fluke-dmm
- - gmc-mh-1x-2x (including all subdrivers)
- - hameg-hmo
- - link-mso19
- - mic-985xx (including all subdrivers)
- - norma-dmm
- - openbench-logic-sniffer
- - rigol-ds (for RS232; not required for USBTMC or TCP)
- - serial-dmm (including all subdrivers)
- - serial-lcr (including all subdrivers)
- - teleinfo
- - tondaj-sl-814
- - uni-t-dmm (all -ser subdrivers)
- - uni-t-ut32x
-
-The following drivers/devices do not require a serial port specification:
-
- - asix-sigma
- - brymen-bm86x
- - chronovu-la
- - demo
- - fx2lafw
- - hantek-dso
- - ikalogic-scanalogic2
- - ikalogic-scanaplus
- - kecheng-kc-330b
- - lascar-el-usb
- - pipistrello-ols
- - rigol-ds (USBTMC or TCP)
- - saleae-logic16
- - sysclk-lwla
- - uni-t-dmm (all non -ser subdrivers)
- - yokogawa-dlm (USBTMC or TCP)
- - zeroplus-logic-cube
+Some of the drivers implement a default for the connection. Some of the
+drivers can auto-detect USB connected devices.
Beyond strict serial communication over COM ports (discussed above), the
conn= property can also address specific USB devices, as well as specify TCP
$ sigrok-cli --driver <somedriver>:conn=vxi/<ipaddr> ...
$ sigrok-cli --driver <somedriver>:conn=usbtmc/<bus>.<addr> ...
-The following drivers/devices accept network communication parameters:
-
- - hameg-hmo
- - rigol-ds
- - scpi-dmm
- - siglent-sds
- - yokogawa-dlm
-
Specifying serial port parameters
---------------------------------
projects / libsigrok.git / blobdiff