+0.3.0 (2014-05-06)
+------------------
+
+Note: This release DOES change the libsigrok API. That means it is NOT
+ backwards-compatible and frontends will need updates.
+
+ * New supported hardware:
+ - Logic analyzers:
+ - ChronoVu LA16
+ - Sysclk LWLA1034
+ - Oscilloscopes:
+ - Agilent DSO1000 series (various models)
+ - Hameg HMO compact series (various models)
+ - Rigol DS2000 series (various models)
+ - Rigol VS5000 series (various models)
+ - Multimeters:
+ - BBC Goerz Metrawatt M2110
+ - Brymen BM869
+ - Fluke 189
+ - Gossen Metrawatt MetraHIT 1x/2x series (various models)
+ - Tenma 72-7745 (rebadged UNI-T UT60E)
+ - Tenma 72-7750 (rebadged UNI-T UT60G)
+ - UNI-T UT60G
+ - UNI-T UT61B
+ - UNI-T UT61C
+ - V&A VA40B
+ - Voltcraft M-3650CR
+ - Voltcraft ME-42
+ - Thermometers:
+ - APPA 55II
+ - Programmable power supplies:
+ - Atten PPS3000 series (various models, tested on PPS3203T-3S).
+ - Conrad DIGI 35 CPU
+ * Add support for channel groups.
+ * Add generic SCPI backend code which can be used via various transports:
+ - Serial ports
+ - USBTMC
+ - TCP/RAW
+ - TCP/Rigol (Rigol-VS5000 series specific)
+ - VXI
+ - librevisa
+ * udev rules file: Add entries for newly supported hardware.
+ * New config keys:
+ - SR_CONF_DEMODULATOR
+ - SR_CONF_CENTER_FREQUENCY
+ - SR_CONF_NUM_LOGIC_CHANNELS
+ - SR_CONF_NUM_ANALOG_CHANNELS
+ - SR_CONF_CLOCK_EDGE
+ - SR_CONF_POWER_SUPPLY
+ - SR_CONF_OUTPUT_VOLTAGE
+ - SR_CONF_OUTPUT_VOLTAGE_MAX
+ - SR_CONF_OUTPUT_CURRENT
+ - SR_CONF_OUTPUT_CURRENT_MAX
+ - SR_CONF_OUTPUT_ENABLED
+ - SR_CONF_OUTPUT_CHANNEL
+ - SR_CONF_OVER_VOLTAGE_PROTECTION
+ - SR_CONF_OVER_CURRENT_PROTECTION
+ - SR_CONF_DEVICE_MODE
+ - SR_CONF_TEST_MODE
+ * New config info types:
+ - SR_T_INT32
+ * New measurement quantity keys:
+ - SR_MQ_TIME
+ * New measurement quantity flags:
+ - SR_MQFLAG_DURATION
+ - SR_MQFLAG_AVG
+ * New device instance types:
+ - SR_INST_SCPI
+ * New error codes:
+ - SR_ERR_CHANNEL_GROUP
+ ∗ The SR_T_CHAR config type has been renamed to SR_T_STRING.
+ * New build dependencies:
+ - libserialport >= 0.1.0 (optional).
+ - All drivers that talk to serial ports now require libserialport.
+ - If libserialport is not found, those drivers will not be built.
+ - librevisa >= 0.0.20130812 (optional, only used by some drivers).
+ * Dropped build dependencies:
+ - libasound2 is no longer required (only the removed alsa driver used it).
+ - libudev is no longer required (only the removed link-mso19 driver used it).
+ * Serial port handling code:
+ - Add support for 5/6 data bits and non-standard baud rates.
+ - Fix an issue related to nonblocking reads (bug #188).
+ - Fix an 'invalid arguments' condition causing problems (bug #192).
+ * alsa: This driver was removed (also fixes bugs #28, #61, #96, #114).
+ * asix-sigma:
+ - Publish SR_CONF_CAPTURE_RATIO correctly (bugs #287, #291).
+ - Don't set invalid config options (bug #86).
+ - Various other bugfixes.
+ * cem-dt-885x: Fix a code portability issue (bug #267).
+ * chronovu-la:
+ - Rename the 'chronovu-la8' driver to 'chronovu-la'.
+ - Add support for the ChronoVu LA16.
+ - Fix a segfault when doing multiple acquisitions on an LA8 (bug #247).
+ - Document that streaming is not possible for LA8/LA16 (bug #261).
+ * demo:
+ - Add support for analog channels (bug #11).
+ - Make the number of channels user-configurable.
+ - Add per-channel-group options.
+ - Implement analog sample patterns: sine, triangle, sawtooth.
+ - Fix a samplerate related issue with rates >= 50kHz (bugs #294, #295).
+ - Fix an issue causing data glitches every 40ms (bug #297).
+ - Fix an issue related to channel group handling (bug #262).
+ * digitek-dt4000zc: Fix driver on NetBSD due to missing DTR=1 (bug #189).
+ * fx2lafw:
+ - Fix incorrect unitsize when a trigger fires (bug #182).
+ - Implement config_get() for SR_CONF_LIMIT_SAMPLES.
+ - Don't send more samples than requested to the session bus.
+ * gmc-mh-1x-2x:
+ - Add new (sub)driver 'gmc-mh-2x-bd232'.
+ - Add support for the SI232-II interface.
+ * hameg-hmo:
+ - Fix a build issue on Mac OS X (bug #216).
+ - Various fixes related to frame limit, samplerate, options, etc.
+ * link-mso19: Drop unfinished driver for now (until it starts working).
+ * openbench-logic-sniffer:
+ - Fix a serial port related issue/hang, seen on (e.g.) NetBSD.
+ - Fix an SR_CONF_PATTERN_MODE related problem (bugs #184, #190).
+ - Fix a serial (non)blocking mode issue (bug #231).
+ - Temporarily disable the driver on Windows (needs portability fixes).
+ - Fix an endianness issue in the protocol handling (bug #135).
+ - Fix a sampling issue when (samples % 4) != 0 (bug #200).
+ - Fix an issue occurring when all channels were disabled (bugs #316, #347).
+ - Add an option to turn test patterns off again (bug #293).
+ * rigol-ds:
+ - Rename the 'rigol-ds1xx2' driver to 'rigol-ds'.
+ - Add support for more models and unify the driver code (bug #212).
+ - Add support for RS232 connectivity (previously only USBTMC worked).
+ - Enable the driver on non-Linux platforms since all transports the driver
+ uses are provided by cross-platform code/libs now (e.g. serial, USBTMC).
+ - Add support for 4 channels (required by some models).
+ - Add support for channel groups.
+ - Advertise SR_CONF_LIMIT_FRAMES support.
+ - Fix an issue with SR_DF_END sending.
+ - Enable/disable LA pod when (de)selecting digital channels.
+ - Disable key lock when closing device.
+ - Work around issues due to DS1000 specific protocol changes (bug #283).
+ - Fix incorrect digital channel numbers on some models (bug #269).
+ - Fix an issue with partial data reads (bugs #220, #209, #207).
+ * saleae-logic16:
+ - Fix an issue related to USB device claiming (bug #159).
+ - Don't send more samples than requested to the session bus (bug #350).
+ - Use unitsize 1 (not 2) if none of channels 8-15 are used.
+ * serial-dmm: Fix some parse issues by increasing a timeout.
+ * sysclk-lwla: Fix a sampling issue related to a glib API call (bug #270).
+ * uni-t-ut32x: Fix typo which prevented usage with multiple devices.
+ * victor-dmm: Fix MIN/MAX always being reported (bug #228).
+ * zeroplus-logic-cube:
+ - Add support for 32-channel models and additional memory sizes.
+ - Fix a frontend issue due to missing SR_CONF_CAPTURE_RATIO.
+ - Fix an issue causing pre-trigger garbage data to be sent (bug #222).
+ - Add initial voltage threshold support.
+ * Various drivers:
+ - Expose missing SR_CONF_TRIGGER_TYPE.
+ - Report max. possible number of samples (bugs #197, #258, #263).
+ * Output modules:
+ - Skip analog channels in logic-only output formats.
+ - Remove the obsolete output module API, add wrapper calls for the new one.
+ - Stop using the obsolete output API (bugs #288, #47, #48).
+ - Properly receive and handle samplerate metadata (bug #46).
+ * input/vcd: Abort with an error upon > 64 channels (bug #194).
+ * output/vcd:
+ - Fix output for more than 8 channels.
+ - Output timestamp only once per change.
+ - Minor whitespace changes of output files to make them more readable.
+ - Remove bogus $dumpvars and $dumpoff commands.
+ - Various bugfixes and portability fixes.
+ * output/csv:
+ - Remove a 64-channel limit (bug #193).
+ - Fix an issue resulting in incorrect trailing commas (bug #230).
+ - Fix an issue where all timestamps would be zero (bug #35).
+ * Rename 'probe' to 'channel' in all places, since libsigrok supports a lot
+ of gear where 'channel' fits better (bug #259).
+ * Change TRIGGER_SLOPE from SR_T_UINT64 to SR_T_STRING.
+ * Windows support improvements:
+ - Use libserialport (+other backend code) to fix serial devices (bug #91).
+ - Add serial source addition/removal backend code (bug #206).
+ - Add backend code for properly supporting USB based devices.
+ * Fix various memory leaks in the backend code.
+ * Fix some incorrect parsing of floating point numbers in the strutil code.
+ * Fix various endianness issues in backend code and drivers (bug #266).
+ * Fix a few issues related to incorrect parsing with non-ANSI-C locales
+ (bugs #271, #272, #273, #274).
+ * Fix an issue related to data being sent to the libsigrok session which
+ was not a multiple of the unit/sample size (bugs, #289, #290).
+ * Drop the es51922 DMM parser (replaced by the generic es519xx parser).
+ * libsigrok session files:
+ - The libsigrok session file format (for *.sr files) has changed, and the
+ file format 'version' field is bumped to 2. Older libsigrok versions will
+ not be able to handle version 2 files, but new libsigrok versions can
+ handle both version 1 and version 2 files. New libsigrok versions will
+ always write/output version 2 files.
+ - Fix an issue resulting in left-over temporary files (bug #276).
+ - Fix an issue with analog probes (unsupported) in *.sr files (bug #277).
+ - Fix an issue with missing samplerate from session files (bug #275).
+ * Improved API documentation.
+ * Major API changes (overview):
+ - Change various function/macro names related to the probe->channel rename.
+ - Change various functions due to the new channel group feature.
+ - All enums in the public API now have names (e.g. 'enum sr_mqflag').
+ - The lib no longer defines names with _t suffix (POSIX reserved).
+ - New API calls:
+ - sr_session_dev_list()
+ - sr_session_save_init()
+ - sr_session_append()
+ - sr_config_commit()
+ - sr_output_new()
+ - sr_output_send()
+ - sr_output_free()
+ - Obsoleted and removed API calls:
+ - sr_filter_channels()
+ - 'struct sr_session' is now opaque (contents shouldn't be used directly).
+ - Please see the Doxygen API documentation for further details.
+ * Build system:
+ - Switch to a non-recursive automake setup (fewer files, faster builds).
+ - configure: Clearly mark required and optional libs.
+
+0.2.2 (2013-11-04)
+------------------
+
+Note: This release does NOT change the libsigrok API. While new config keys,
+ config info types, and unit codes have been added (additional enum
+ entries / numbers), no existing interfaces were added/changed/removed.
+ Frontends should continue to work fine without recompiling or relinking.
+
+ * New supported hardware:
+ - Logic analyzers:
+ - Saleae Logic16
+ - Thermometers:
+ - Center 309
+ - UNI-T UT325
+ - Voltcraft K204
+ - Multimeters:
+ - ISOTECH IDM103N
+ - Metex M-4650CR
+ - Norma DM950
+ - Voltcraft M-4650CR
+ - Energy meters:
+ - EDF Teleinfo
+ * New config keys:
+ - SR_CONF_VOLTAGE_THRESHOLD
+ - SR_CONF_EXTERNAL_CLOCK
+ - SR_CONF_SWAP
+ - SR_CONF_ENERGYMETER
+ * New config info types:
+ - SR_T_DOUBLE_RANGE
+ * New units:
+ - SR_UNIT_REVOLUTIONS_PER_MINUTE
+ - SR_UNIT_VOLT_AMPERE
+ - SR_UNIT_WATT
+ - SR_UNIT_WATT_HOUR
+ * New input modules:
+ - csv (comma-separated values)
+ * Bump required libzip version to >= 0.10.
+ * uni-t-dmm: This driver now requires the specification of the USB VID/PID
+ of the cable that is used. Example for sigrok-cli:
+ - Old: sigrok-cli --driver voltcraft-vc820 ...
+ - New: sigrok-cli --driver voltcraft-vc820:conn=1a86.e008 ...
+ * openbench-logic-sniffer:
+ - Initial test pattern support (SR_CONF_PATTERN_MODE).
+ - Initial external clock support (SR_CONF_EXTERNAL_CLOCK).
+ - Initial channel swap support (SR_CONF_SWAP).
+ - Various minor fixes and improvements.
+ * When a frontend adds a device instance to a running session, start
+ acquisition on it. This helps with the collectd use-case where devices
+ can be removed and added dynamically while a session is running.
+ * rigol-ds1xx2: Support newer Linux kernels with USBTMC in /sys/class/usbmisc.
+ * rigol-ds1xx2: Also detect the Rigol DS1152E/DS1152D.
+ * agilent-dmm: Fix a segfault happening in certain cases.
+ * output/analog: Support all currently known MQFLAGs.
+ * Fix a minor compile issue due to an incorrect #include.
+ * Fix two compile issues on FreeBSD (bug #185).
+ * es519xx: New generic parser for various Cyrustek DMM ICs.
+ * es51922/fs9721/fs9922/metex14: Use diode MQFLAG (bug #141).
+ * voltcraft-vc830: Fix diode mode handling (bug #142).
+ * Add the missing HACKING file to the tarball.
+ * README.devices: Updates/notes for newly added devices.
+
+0.2.1 (2013-08-07)
+------------------
+
+Note: This release does NOT change the libsigrok API. While new config keys,
+ config info types, and error codes have been added (additional enum
+ entries / numbers), no existing interfaces were added/changed/removed.
+ Frontends should continue to work fine without recompiling or relinking.
+
+ * New supported hardware:
+ - Logic analyzers:
+ - IKALOGIC Scanalogic-2
+ - IKALOGIC ScanaPLUS
+ - Sound level meters:
+ - CEM DT-8852
+ - Kecheng KC-330B
+ - Multimeters:
+ - UNI-T UT60A
+ - UNI-T UT60E
+ - Voltcraft M-3650D
+ - Voltcraft VC-830
+ * Drop the Tecpel DMM-8060 (doesn't have PC connectivity).
+ * New config keys:
+ - SR_CONF_SPL_WEIGHT_FREQ
+ - SR_CONF_SPL_WEIGHT_TIME
+ - SR_CONF_SPL_MEASUREMENT_RANGE
+ - SR_CONF_HOLD_MIN
+ - SR_CONF_HOLD_MAX
+ - SR_CONF_POWER_OFF
+ - SR_CONF_DATA_SOURCE
+ * New config info types:
+ - SR_T_UINT64_RANGE
+ * New error codes:
+ - SR_ERR_TIMEOUT
+ * Always link against libm, the math library (bug #115).
+ * Fix a bug in sr_si_string_u64() at al (bug #73).
+ * output/csv: Fix incorrect probe order.
+ * alsa: Fix a double-free issue (bug #129).
+ * zeroplus-logic-cube: Fix a bug in the driver cleanup code.
+ * ikalogic-scanalogic2: Use GET_REPORT (bug #130).
+ * uni-t-dmm: Fix a bug breaking the UNI-T UT61E (bug #136).
+ * Various internal consistency fixes and code cleanups.
+ * Improved Doxygen documentation.
+ * Fixed various memory leaks.
+
0.2.0 (2013-05-04)
------------------
projects / libsigrok.git / blobdiff