]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2014 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include <config.h> | |
21 | #include <string.h> | |
22 | #include <strings.h> | |
23 | #include "scpi.h" | |
24 | #include "protocol.h" | |
25 | ||
26 | SR_PRIV struct sr_dev_driver scpi_pps_driver_info; | |
27 | ||
28 | static const uint32_t scanopts[] = { | |
29 | SR_CONF_CONN, | |
30 | SR_CONF_SERIALCOMM, | |
31 | }; | |
32 | ||
33 | static const uint32_t drvopts[] = { | |
34 | SR_CONF_POWER_SUPPLY, | |
35 | }; | |
36 | ||
37 | static const struct pps_channel_instance pci[] = { | |
38 | { SR_MQ_VOLTAGE, SCPI_CMD_GET_MEAS_VOLTAGE, "V" }, | |
39 | { SR_MQ_CURRENT, SCPI_CMD_GET_MEAS_CURRENT, "I" }, | |
40 | { SR_MQ_POWER, SCPI_CMD_GET_MEAS_POWER, "P" }, | |
41 | { SR_MQ_FREQUENCY, SCPI_CMD_GET_MEAS_FREQUENCY, "F" }, | |
42 | }; | |
43 | ||
44 | static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx) | |
45 | { | |
46 | return std_init(sr_ctx, di, LOG_PREFIX); | |
47 | } | |
48 | ||
49 | static struct sr_dev_inst *probe_device(struct sr_scpi_dev_inst *scpi) | |
50 | { | |
51 | struct dev_context *devc; | |
52 | struct sr_dev_inst *sdi; | |
53 | struct sr_scpi_hw_info *hw_info; | |
54 | struct sr_channel_group *cg; | |
55 | struct sr_channel *ch; | |
56 | const struct scpi_pps *device; | |
57 | struct pps_channel *pch; | |
58 | struct channel_spec *channels; | |
59 | struct channel_group_spec *channel_groups, *cgs; | |
60 | struct pps_channel_group *pcg; | |
61 | GRegex *model_re; | |
62 | GMatchInfo *model_mi; | |
63 | GSList *l; | |
64 | uint64_t mask; | |
65 | unsigned int num_channels, num_channel_groups, ch_num, ch_idx, i, j; | |
66 | int ret; | |
67 | const char *vendor; | |
68 | char ch_name[16]; | |
69 | ||
70 | if (sr_scpi_get_hw_id(scpi, &hw_info) != SR_OK) { | |
71 | sr_info("Couldn't get IDN response."); | |
72 | return NULL; | |
73 | } | |
74 | ||
75 | device = NULL; | |
76 | for (i = 0; i < num_pps_profiles; i++) { | |
77 | vendor = sr_vendor_alias(hw_info->manufacturer); | |
78 | if (g_ascii_strcasecmp(vendor, pps_profiles[i].vendor)) | |
79 | continue; | |
80 | model_re = g_regex_new(pps_profiles[i].model, 0, 0, NULL); | |
81 | if (g_regex_match(model_re, hw_info->model, 0, &model_mi)) | |
82 | device = &pps_profiles[i]; | |
83 | g_match_info_unref(model_mi); | |
84 | g_regex_unref(model_re); | |
85 | if (device) | |
86 | break; | |
87 | } | |
88 | if (!device) { | |
89 | sr_scpi_hw_info_free(hw_info); | |
90 | return NULL; | |
91 | } | |
92 | ||
93 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
94 | sdi->status = SR_ST_INACTIVE; | |
95 | sdi->vendor = g_strdup(vendor); | |
96 | sdi->model = g_strdup(hw_info->model); | |
97 | sdi->version = g_strdup(hw_info->firmware_version); | |
98 | sdi->conn = scpi; | |
99 | sdi->driver = &scpi_pps_driver_info; | |
100 | sdi->inst_type = SR_INST_SCPI; | |
101 | sdi->serial_num = g_strdup(hw_info->serial_number); | |
102 | ||
103 | devc = g_malloc0(sizeof(struct dev_context)); | |
104 | devc->device = device; | |
105 | sdi->priv = devc; | |
106 | ||
107 | if (device->num_channels) { | |
108 | /* Static channels and groups. */ | |
109 | channels = (struct channel_spec *)device->channels; | |
110 | num_channels = device->num_channels; | |
111 | channel_groups = (struct channel_group_spec *)device->channel_groups; | |
112 | num_channel_groups = device->num_channel_groups; | |
113 | } else { | |
114 | /* Channels and groups need to be probed. */ | |
115 | ret = device->probe_channels(sdi, hw_info, &channels, &num_channels, | |
116 | &channel_groups, &num_channel_groups); | |
117 | if (ret != SR_OK) { | |
118 | sr_err("Failed to probe for channels."); | |
119 | return NULL; | |
120 | } | |
121 | /* | |
122 | * Since these were dynamically allocated, we'll need to free them | |
123 | * later. | |
124 | */ | |
125 | devc->channels = channels; | |
126 | devc->channel_groups = channel_groups; | |
127 | } | |
128 | ||
129 | ch_idx = 0; | |
130 | for (ch_num = 0; ch_num < num_channels; ch_num++) { | |
131 | /* Create one channel per measurable output unit. */ | |
132 | for (i = 0; i < ARRAY_SIZE(pci); i++) { | |
133 | if (!scpi_cmd_get(devc->device->commands, pci[i].command)) | |
134 | continue; | |
135 | g_snprintf(ch_name, 16, "%s%s", pci[i].prefix, | |
136 | channels[ch_num].name); | |
137 | ch = sr_channel_new(sdi, ch_idx++, SR_CHANNEL_ANALOG, TRUE, | |
138 | ch_name); | |
139 | pch = g_malloc0(sizeof(struct pps_channel)); | |
140 | pch->hw_output_idx = ch_num; | |
141 | pch->hwname = channels[ch_num].name; | |
142 | pch->mq = pci[i].mq; | |
143 | ch->priv = pch; | |
144 | } | |
145 | } | |
146 | ||
147 | for (i = 0; i < num_channel_groups; i++) { | |
148 | cgs = &channel_groups[i]; | |
149 | cg = g_malloc0(sizeof(struct sr_channel_group)); | |
150 | cg->name = g_strdup(cgs->name); | |
151 | for (j = 0, mask = 1; j < 64; j++, mask <<= 1) { | |
152 | if (cgs->channel_index_mask & mask) { | |
153 | for (l = sdi->channels; l; l = l->next) { | |
154 | ch = l->data; | |
155 | pch = ch->priv; | |
156 | if (pch->hw_output_idx == j) | |
157 | cg->channels = g_slist_append(cg->channels, ch); | |
158 | } | |
159 | } | |
160 | } | |
161 | pcg = g_malloc0(sizeof(struct pps_channel_group)); | |
162 | pcg->features = cgs->features; | |
163 | cg->priv = pcg; | |
164 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
165 | } | |
166 | ||
167 | sr_scpi_hw_info_free(hw_info); | |
168 | hw_info = NULL; | |
169 | ||
170 | scpi_cmd(sdi, devc->device->commands, SCPI_CMD_LOCAL); | |
171 | sr_scpi_close(scpi); | |
172 | ||
173 | return sdi; | |
174 | } | |
175 | ||
176 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
177 | { | |
178 | return sr_scpi_scan(di->context, options, probe_device); | |
179 | } | |
180 | ||
181 | static GSList *dev_list(const struct sr_dev_driver *di) | |
182 | { | |
183 | return ((struct drv_context *)(di->context))->instances; | |
184 | } | |
185 | ||
186 | static int dev_clear(const struct sr_dev_driver *di) | |
187 | { | |
188 | return std_dev_clear(di, NULL); | |
189 | } | |
190 | ||
191 | static int dev_open(struct sr_dev_inst *sdi) | |
192 | { | |
193 | struct dev_context *devc; | |
194 | struct sr_scpi_dev_inst *scpi; | |
195 | GVariant *beeper; | |
196 | ||
197 | if (sdi->status != SR_ST_INACTIVE) | |
198 | return SR_ERR; | |
199 | ||
200 | scpi = sdi->conn; | |
201 | if (sr_scpi_open(scpi) < 0) | |
202 | return SR_ERR; | |
203 | ||
204 | sdi->status = SR_ST_ACTIVE; | |
205 | ||
206 | devc = sdi->priv; | |
207 | scpi_cmd(sdi, devc->device->commands, SCPI_CMD_REMOTE); | |
208 | devc = sdi->priv; | |
209 | devc->beeper_was_set = FALSE; | |
210 | if (scpi_cmd_resp(sdi, devc->device->commands, &beeper, | |
211 | G_VARIANT_TYPE_BOOLEAN, SCPI_CMD_BEEPER) == SR_OK) { | |
212 | if (g_variant_get_boolean(beeper)) { | |
213 | devc->beeper_was_set = TRUE; | |
214 | scpi_cmd(sdi, devc->device->commands, SCPI_CMD_BEEPER_DISABLE); | |
215 | } | |
216 | g_variant_unref(beeper); | |
217 | } | |
218 | ||
219 | return SR_OK; | |
220 | } | |
221 | ||
222 | static int dev_close(struct sr_dev_inst *sdi) | |
223 | { | |
224 | struct sr_scpi_dev_inst *scpi; | |
225 | struct dev_context *devc; | |
226 | ||
227 | if (sdi->status != SR_ST_ACTIVE) | |
228 | return SR_ERR_DEV_CLOSED; | |
229 | ||
230 | devc = sdi->priv; | |
231 | scpi = sdi->conn; | |
232 | if (scpi) { | |
233 | if (devc->beeper_was_set) | |
234 | scpi_cmd(sdi, devc->device->commands, SCPI_CMD_BEEPER_ENABLE); | |
235 | scpi_cmd(sdi, devc->device->commands, SCPI_CMD_LOCAL); | |
236 | sr_scpi_close(scpi); | |
237 | sdi->status = SR_ST_INACTIVE; | |
238 | } | |
239 | ||
240 | return SR_OK; | |
241 | } | |
242 | ||
243 | static void clear_helper(void *priv) | |
244 | { | |
245 | struct dev_context *devc; | |
246 | ||
247 | devc = priv; | |
248 | g_free(devc->channels); | |
249 | g_free(devc->channel_groups); | |
250 | g_free(devc); | |
251 | } | |
252 | ||
253 | static int cleanup(const struct sr_dev_driver *di) | |
254 | { | |
255 | return std_dev_clear(di, clear_helper); | |
256 | } | |
257 | ||
258 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
259 | const struct sr_channel_group *cg) | |
260 | { | |
261 | struct dev_context *devc; | |
262 | const GVariantType *gvtype; | |
263 | unsigned int i; | |
264 | int cmd, ret; | |
265 | const char *s; | |
266 | ||
267 | if (!sdi) | |
268 | return SR_ERR_ARG; | |
269 | ||
270 | devc = sdi->priv; | |
271 | ||
272 | if (cg) { | |
273 | /* | |
274 | * These options only apply to channel groups with a single | |
275 | * channel -- they're per-channel settings for the device. | |
276 | */ | |
277 | ||
278 | /* | |
279 | * Config keys are handled below depending on whether a channel | |
280 | * group was provided by the frontend. However some of these | |
281 | * take a CG on one PPS but not on others. Check the device's | |
282 | * profile for that here, and NULL out the channel group as needed. | |
283 | */ | |
284 | for (i = 0; i < devc->device->num_devopts; i++) { | |
285 | if (devc->device->devopts[i] == key) { | |
286 | cg = NULL; | |
287 | break; | |
288 | } | |
289 | } | |
290 | } | |
291 | ||
292 | gvtype = NULL; | |
293 | cmd = -1; | |
294 | switch (key) { | |
295 | case SR_CONF_ENABLED: | |
296 | gvtype = G_VARIANT_TYPE_BOOLEAN; | |
297 | cmd = SCPI_CMD_GET_OUTPUT_ENABLED; | |
298 | break; | |
299 | case SR_CONF_VOLTAGE: | |
300 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
301 | cmd = SCPI_CMD_GET_MEAS_VOLTAGE; | |
302 | break; | |
303 | case SR_CONF_VOLTAGE_TARGET: | |
304 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
305 | cmd = SCPI_CMD_GET_VOLTAGE_TARGET; | |
306 | break; | |
307 | case SR_CONF_OUTPUT_FREQUENCY: | |
308 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
309 | cmd = SCPI_CMD_GET_MEAS_FREQUENCY; | |
310 | break; | |
311 | case SR_CONF_OUTPUT_FREQUENCY_TARGET: | |
312 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
313 | cmd = SCPI_CMD_GET_FREQUENCY_TARGET; | |
314 | break; | |
315 | case SR_CONF_CURRENT: | |
316 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
317 | cmd = SCPI_CMD_GET_MEAS_CURRENT; | |
318 | break; | |
319 | case SR_CONF_CURRENT_LIMIT: | |
320 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
321 | cmd = SCPI_CMD_GET_CURRENT_LIMIT; | |
322 | break; | |
323 | case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED: | |
324 | gvtype = G_VARIANT_TYPE_BOOLEAN; | |
325 | cmd = SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED; | |
326 | break; | |
327 | case SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE: | |
328 | gvtype = G_VARIANT_TYPE_BOOLEAN; | |
329 | cmd = SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE; | |
330 | break; | |
331 | case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD: | |
332 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
333 | cmd = SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD; | |
334 | break; | |
335 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: | |
336 | gvtype = G_VARIANT_TYPE_BOOLEAN; | |
337 | cmd = SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED; | |
338 | break; | |
339 | case SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE: | |
340 | gvtype = G_VARIANT_TYPE_BOOLEAN; | |
341 | cmd = SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE; | |
342 | break; | |
343 | case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD: | |
344 | gvtype = G_VARIANT_TYPE_DOUBLE; | |
345 | cmd = SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD; | |
346 | break; | |
347 | case SR_CONF_OVER_TEMPERATURE_PROTECTION: | |
348 | gvtype = G_VARIANT_TYPE_BOOLEAN; | |
349 | cmd = SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION; | |
350 | break; | |
351 | case SR_CONF_REGULATION: | |
352 | gvtype = G_VARIANT_TYPE_STRING; | |
353 | cmd = SCPI_CMD_GET_OUTPUT_REGULATION; | |
354 | } | |
355 | if (!gvtype) | |
356 | return SR_ERR_NA; | |
357 | ||
358 | if (cg) | |
359 | select_channel(sdi, cg->channels->data); | |
360 | ret = scpi_cmd_resp(sdi, devc->device->commands, data, gvtype, cmd); | |
361 | ||
362 | if (cmd == SCPI_CMD_GET_OUTPUT_REGULATION) { | |
363 | /* | |
364 | * The Rigol DP800 series return CV/CC/UR, Philips PM2800 | |
365 | * return VOLT/CURR. We always return a GVariant string in | |
366 | * the Rigol notation. | |
367 | */ | |
368 | s = g_variant_get_string(*data, NULL); | |
369 | if (!strcmp(s, "VOLT")) { | |
370 | g_variant_unref(*data); | |
371 | *data = g_variant_new_string("CV"); | |
372 | } else if (!strcmp(s, "CURR")) { | |
373 | g_variant_unref(*data); | |
374 | *data = g_variant_new_string("CC"); | |
375 | } | |
376 | ||
377 | s = g_variant_get_string(*data, NULL); | |
378 | if (strcmp(s, "CV") && strcmp(s, "CC") && strcmp(s, "UR")) { | |
379 | sr_dbg("Unknown response to SCPI_CMD_GET_OUTPUT_REGULATION: %s", s); | |
380 | ret = SR_ERR_DATA; | |
381 | } | |
382 | } | |
383 | ||
384 | return ret; | |
385 | } | |
386 | ||
387 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, | |
388 | const struct sr_channel_group *cg) | |
389 | { | |
390 | struct dev_context *devc; | |
391 | double d; | |
392 | int ret; | |
393 | ||
394 | if (!sdi) | |
395 | return SR_ERR_ARG; | |
396 | ||
397 | if (sdi->status != SR_ST_ACTIVE) | |
398 | return SR_ERR_DEV_CLOSED; | |
399 | ||
400 | if (cg) | |
401 | /* Channel group specified. */ | |
402 | select_channel(sdi, cg->channels->data); | |
403 | ||
404 | devc = sdi->priv; | |
405 | ||
406 | switch (key) { | |
407 | case SR_CONF_ENABLED: | |
408 | if (g_variant_get_boolean(data)) | |
409 | ret = scpi_cmd(sdi, devc->device->commands, | |
410 | SCPI_CMD_SET_OUTPUT_ENABLE); | |
411 | else | |
412 | ret = scpi_cmd(sdi, devc->device->commands, | |
413 | SCPI_CMD_SET_OUTPUT_DISABLE); | |
414 | break; | |
415 | case SR_CONF_VOLTAGE_TARGET: | |
416 | d = g_variant_get_double(data); | |
417 | ret = scpi_cmd(sdi, devc->device->commands, | |
418 | SCPI_CMD_SET_VOLTAGE_TARGET, d); | |
419 | break; | |
420 | case SR_CONF_OUTPUT_FREQUENCY_TARGET: | |
421 | d = g_variant_get_double(data); | |
422 | ret = scpi_cmd(sdi, devc->device->commands, | |
423 | SCPI_CMD_SET_FREQUENCY_TARGET, d); | |
424 | break; | |
425 | case SR_CONF_CURRENT_LIMIT: | |
426 | d = g_variant_get_double(data); | |
427 | ret = scpi_cmd(sdi, devc->device->commands, | |
428 | SCPI_CMD_SET_CURRENT_LIMIT, d); | |
429 | break; | |
430 | case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED: | |
431 | if (g_variant_get_boolean(data)) | |
432 | ret = scpi_cmd(sdi, devc->device->commands, | |
433 | SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE); | |
434 | else | |
435 | ret = scpi_cmd(sdi, devc->device->commands, | |
436 | SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE); | |
437 | break; | |
438 | case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD: | |
439 | d = g_variant_get_double(data); | |
440 | ret = scpi_cmd(sdi, devc->device->commands, | |
441 | SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, d); | |
442 | break; | |
443 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: | |
444 | if (g_variant_get_boolean(data)) | |
445 | ret = scpi_cmd(sdi, devc->device->commands, | |
446 | SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE); | |
447 | else | |
448 | ret = scpi_cmd(sdi, devc->device->commands, | |
449 | SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE); | |
450 | break; | |
451 | case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD: | |
452 | d = g_variant_get_double(data); | |
453 | ret = scpi_cmd(sdi, devc->device->commands, | |
454 | SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, d); | |
455 | break; | |
456 | case SR_CONF_OVER_TEMPERATURE_PROTECTION: | |
457 | if (g_variant_get_boolean(data)) | |
458 | ret = scpi_cmd(sdi, devc->device->commands, | |
459 | SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_ENABLE); | |
460 | else | |
461 | ret = scpi_cmd(sdi, devc->device->commands, | |
462 | SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_DISABLE); | |
463 | break; | |
464 | default: | |
465 | ret = SR_ERR_NA; | |
466 | } | |
467 | ||
468 | return ret; | |
469 | } | |
470 | ||
471 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
472 | const struct sr_channel_group *cg) | |
473 | { | |
474 | struct dev_context *devc; | |
475 | struct sr_channel *ch; | |
476 | const struct channel_spec *ch_spec; | |
477 | GVariant *gvar; | |
478 | GVariantBuilder gvb; | |
479 | int ret, i; | |
480 | const char *s[16]; | |
481 | ||
482 | /* Always available, even without sdi. */ | |
483 | if (key == SR_CONF_SCAN_OPTIONS) { | |
484 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
485 | scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t)); | |
486 | return SR_OK; | |
487 | } else if (key == SR_CONF_DEVICE_OPTIONS && !sdi) { | |
488 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
489 | drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); | |
490 | return SR_OK; | |
491 | } | |
492 | ||
493 | if (!sdi) | |
494 | return SR_ERR_ARG; | |
495 | devc = sdi->priv; | |
496 | ||
497 | ret = SR_OK; | |
498 | if (!cg) { | |
499 | /* No channel group: global options. */ | |
500 | switch (key) { | |
501 | case SR_CONF_DEVICE_OPTIONS: | |
502 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
503 | devc->device->devopts, devc->device->num_devopts, | |
504 | sizeof(uint32_t)); | |
505 | break; | |
506 | case SR_CONF_CHANNEL_CONFIG: | |
507 | /* Not used. */ | |
508 | i = 0; | |
509 | if (devc->device->features & PPS_INDEPENDENT) | |
510 | s[i++] = "Independent"; | |
511 | if (devc->device->features & PPS_SERIES) | |
512 | s[i++] = "Series"; | |
513 | if (devc->device->features & PPS_PARALLEL) | |
514 | s[i++] = "Parallel"; | |
515 | if (i == 0) { | |
516 | /* | |
517 | * Shouldn't happen: independent-only devices | |
518 | * shouldn't advertise this option at all. | |
519 | */ | |
520 | return SR_ERR_NA; | |
521 | } | |
522 | *data = g_variant_new_strv(s, i); | |
523 | break; | |
524 | default: | |
525 | return SR_ERR_NA; | |
526 | } | |
527 | } else { | |
528 | /* Channel group specified. */ | |
529 | /* | |
530 | * Per-channel-group options depending on a channel are actually | |
531 | * done with the first channel. Channel groups in PPS can have | |
532 | * more than one channel, but they will typically be of equal | |
533 | * specification for use in series or parallel mode. | |
534 | */ | |
535 | ch = cg->channels->data; | |
536 | ||
537 | switch (key) { | |
538 | case SR_CONF_DEVICE_OPTIONS: | |
539 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
540 | devc->device->devopts_cg, devc->device->num_devopts_cg, | |
541 | sizeof(uint32_t)); | |
542 | break; | |
543 | case SR_CONF_VOLTAGE_TARGET: | |
544 | ch_spec = &(devc->device->channels[ch->index]); | |
545 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
546 | /* Min, max, write resolution. */ | |
547 | for (i = 0; i < 3; i++) { | |
548 | gvar = g_variant_new_double(ch_spec->voltage[i]); | |
549 | g_variant_builder_add_value(&gvb, gvar); | |
550 | } | |
551 | *data = g_variant_builder_end(&gvb); | |
552 | break; | |
553 | case SR_CONF_OUTPUT_FREQUENCY_TARGET: | |
554 | ch_spec = &(devc->device->channels[ch->index]); | |
555 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
556 | /* Min, max, write resolution. */ | |
557 | for (i = 0; i < 3; i++) { | |
558 | gvar = g_variant_new_double(ch_spec->frequency[i]); | |
559 | g_variant_builder_add_value(&gvb, gvar); | |
560 | } | |
561 | *data = g_variant_builder_end(&gvb); | |
562 | break; | |
563 | case SR_CONF_CURRENT_LIMIT: | |
564 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
565 | /* Min, max, step. */ | |
566 | for (i = 0; i < 3; i++) { | |
567 | ch_spec = &(devc->device->channels[ch->index]); | |
568 | gvar = g_variant_new_double(ch_spec->current[i]); | |
569 | g_variant_builder_add_value(&gvb, gvar); | |
570 | } | |
571 | *data = g_variant_builder_end(&gvb); | |
572 | break; | |
573 | default: | |
574 | return SR_ERR_NA; | |
575 | } | |
576 | } | |
577 | ||
578 | return ret; | |
579 | } | |
580 | ||
581 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data) | |
582 | { | |
583 | struct dev_context *devc; | |
584 | struct sr_scpi_dev_inst *scpi; | |
585 | struct sr_channel *ch; | |
586 | struct pps_channel *pch; | |
587 | int cmd, ret; | |
588 | ||
589 | if (sdi->status != SR_ST_ACTIVE) | |
590 | return SR_ERR_DEV_CLOSED; | |
591 | ||
592 | devc = sdi->priv; | |
593 | scpi = sdi->conn; | |
594 | devc->cb_data = cb_data; | |
595 | ||
596 | if ((ret = sr_scpi_source_add(sdi->session, scpi, G_IO_IN, 10, | |
597 | scpi_pps_receive_data, (void *)sdi)) != SR_OK) | |
598 | return ret; | |
599 | std_session_send_df_header(sdi, LOG_PREFIX); | |
600 | ||
601 | /* Prime the pipe with the first channel's fetch. */ | |
602 | ch = sr_next_enabled_channel(sdi, NULL); | |
603 | pch = ch->priv; | |
604 | if ((ret = select_channel(sdi, ch)) < 0) | |
605 | return ret; | |
606 | if (pch->mq == SR_MQ_VOLTAGE) | |
607 | cmd = SCPI_CMD_GET_MEAS_VOLTAGE; | |
608 | else if (pch->mq == SR_MQ_FREQUENCY) | |
609 | cmd = SCPI_CMD_GET_MEAS_FREQUENCY; | |
610 | else if (pch->mq == SR_MQ_CURRENT) | |
611 | cmd = SCPI_CMD_GET_MEAS_CURRENT; | |
612 | else if (pch->mq == SR_MQ_POWER) | |
613 | cmd = SCPI_CMD_GET_MEAS_POWER; | |
614 | else | |
615 | return SR_ERR; | |
616 | scpi_cmd(sdi, devc->device->commands, cmd, pch->hwname); | |
617 | ||
618 | return SR_OK; | |
619 | } | |
620 | ||
621 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
622 | { | |
623 | struct sr_datafeed_packet packet; | |
624 | struct sr_scpi_dev_inst *scpi; | |
625 | float f; | |
626 | ||
627 | (void)cb_data; | |
628 | ||
629 | if (sdi->status != SR_ST_ACTIVE) | |
630 | return SR_ERR_DEV_CLOSED; | |
631 | ||
632 | scpi = sdi->conn; | |
633 | ||
634 | /* | |
635 | * A requested value is certainly on the way. Retrieve it now, | |
636 | * to avoid leaving the device in a state where it's not expecting | |
637 | * commands. | |
638 | */ | |
639 | sr_scpi_get_float(scpi, NULL, &f); | |
640 | sr_scpi_source_remove(sdi->session, scpi); | |
641 | ||
642 | packet.type = SR_DF_END; | |
643 | sr_session_send(sdi, &packet); | |
644 | ||
645 | return SR_OK; | |
646 | } | |
647 | ||
648 | SR_PRIV struct sr_dev_driver scpi_pps_driver_info = { | |
649 | .name = "scpi-pps", | |
650 | .longname = "SCPI PPS", | |
651 | .api_version = 1, | |
652 | .init = init, | |
653 | .cleanup = cleanup, | |
654 | .scan = scan, | |
655 | .dev_list = dev_list, | |
656 | .dev_clear = dev_clear, | |
657 | .config_get = config_get, | |
658 | .config_set = config_set, | |
659 | .config_list = config_list, | |
660 | .dev_open = dev_open, | |
661 | .dev_close = dev_close, | |
662 | .dev_acquisition_start = dev_acquisition_start, | |
663 | .dev_acquisition_stop = dev_acquisition_stop, | |
664 | .context = NULL, | |
665 | }; |