]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
20 | ||
21 | #include "protocol.h" | |
22 | ||
23 | #define USB_VENDOR_ID 0x0403 | |
24 | #define USB_DEVICE_ID 0x6014 | |
25 | #define USB_VENDOR_NAME "IKALOGIC" | |
26 | #define USB_MODEL_NAME "ScanaPLUS" | |
27 | #define USB_IPRODUCT "SCANAPLUS" | |
28 | ||
29 | #define SAMPLE_BUF_SIZE (8 * 1024 * 1024) | |
30 | ||
31 | static const uint32_t devopts[] = { | |
32 | SR_CONF_LOGIC_ANALYZER, | |
33 | SR_CONF_LIMIT_SAMPLES | SR_CONF_SET, | |
34 | SR_CONF_LIMIT_MSEC | SR_CONF_SET, | |
35 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
36 | }; | |
37 | ||
38 | /* Channels are numbered 1-9. */ | |
39 | static const char *channel_names[] = { | |
40 | "1", "2", "3", "4", "5", "6", "7", "8", "9", | |
41 | NULL, | |
42 | }; | |
43 | ||
44 | /* Note: The IKALOGIC ScanaPLUS always samples at 100MHz. */ | |
45 | static uint64_t samplerates[1] = { SR_MHZ(100) }; | |
46 | ||
47 | SR_PRIV struct sr_dev_driver ikalogic_scanaplus_driver_info; | |
48 | static struct sr_dev_driver *di = &ikalogic_scanaplus_driver_info; | |
49 | ||
50 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data); | |
51 | ||
52 | static void clear_helper(void *priv) | |
53 | { | |
54 | struct dev_context *devc; | |
55 | ||
56 | devc = priv; | |
57 | ||
58 | ftdi_free(devc->ftdic); | |
59 | g_free(devc->compressed_buf); | |
60 | g_free(devc->sample_buf); | |
61 | g_free(devc); | |
62 | } | |
63 | ||
64 | static int dev_clear(void) | |
65 | { | |
66 | return std_dev_clear(di, clear_helper); | |
67 | } | |
68 | ||
69 | static int init(struct sr_context *sr_ctx) | |
70 | { | |
71 | return std_init(sr_ctx, di, LOG_PREFIX); | |
72 | } | |
73 | ||
74 | static GSList *scan(GSList *options) | |
75 | { | |
76 | struct sr_dev_inst *sdi; | |
77 | struct sr_channel *ch; | |
78 | struct drv_context *drvc; | |
79 | struct dev_context *devc; | |
80 | GSList *devices; | |
81 | unsigned int i; | |
82 | int ret; | |
83 | ||
84 | (void)options; | |
85 | ||
86 | drvc = di->priv; | |
87 | ||
88 | devices = NULL; | |
89 | ||
90 | /* Allocate memory for our private device context. */ | |
91 | if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) { | |
92 | sr_err("Device context malloc failed."); | |
93 | goto err_free_nothing; | |
94 | } | |
95 | ||
96 | /* Allocate memory for the incoming compressed samples. */ | |
97 | if (!(devc->compressed_buf = g_try_malloc0(COMPRESSED_BUF_SIZE))) { | |
98 | sr_err("compressed_buf malloc failed."); | |
99 | goto err_free_devc; | |
100 | } | |
101 | ||
102 | /* Allocate memory for the uncompressed samples. */ | |
103 | if (!(devc->sample_buf = g_try_malloc0(SAMPLE_BUF_SIZE))) { | |
104 | sr_err("sample_buf malloc failed."); | |
105 | goto err_free_compressed_buf; | |
106 | } | |
107 | ||
108 | /* Allocate memory for the FTDI context (ftdic) and initialize it. */ | |
109 | if (!(devc->ftdic = ftdi_new())) { | |
110 | sr_err("Failed to initialize libftdi."); | |
111 | goto err_free_sample_buf; | |
112 | } | |
113 | ||
114 | /* Check for the device and temporarily open it. */ | |
115 | ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID, | |
116 | USB_IPRODUCT, NULL); | |
117 | if (ret < 0) { | |
118 | /* Log errors, except for -3 ("device not found"). */ | |
119 | if (ret != -3) | |
120 | sr_err("Failed to open device (%d): %s", ret, | |
121 | ftdi_get_error_string(devc->ftdic)); | |
122 | goto err_free_ftdic; | |
123 | } | |
124 | ||
125 | /* Register the device with libsigrok. */ | |
126 | sdi = sr_dev_inst_new(); | |
127 | sdi->status = SR_ST_INITIALIZING; | |
128 | sdi->vendor = g_strdup(USB_VENDOR_NAME); | |
129 | sdi->model = g_strdup(USB_MODEL_NAME); | |
130 | sdi->driver = di; | |
131 | sdi->priv = devc; | |
132 | ||
133 | for (i = 0; channel_names[i]; i++) { | |
134 | if (!(ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE, | |
135 | channel_names[i]))) | |
136 | return NULL; | |
137 | sdi->channels = g_slist_append(sdi->channels, ch); | |
138 | } | |
139 | ||
140 | devices = g_slist_append(devices, sdi); | |
141 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
142 | ||
143 | /* Close device. We'll reopen it again when we need it. */ | |
144 | scanaplus_close(devc); | |
145 | ||
146 | return devices; | |
147 | ||
148 | scanaplus_close(devc); | |
149 | err_free_ftdic: | |
150 | ftdi_free(devc->ftdic); /* NOT free() or g_free()! */ | |
151 | err_free_sample_buf: | |
152 | g_free(devc->sample_buf); | |
153 | err_free_compressed_buf: | |
154 | g_free(devc->compressed_buf); | |
155 | err_free_devc: | |
156 | g_free(devc); | |
157 | err_free_nothing: | |
158 | ||
159 | return NULL; | |
160 | } | |
161 | ||
162 | static GSList *dev_list(void) | |
163 | { | |
164 | return ((struct drv_context *)(di->priv))->instances; | |
165 | } | |
166 | ||
167 | static int dev_open(struct sr_dev_inst *sdi) | |
168 | { | |
169 | struct dev_context *devc; | |
170 | int ret; | |
171 | ||
172 | devc = sdi->priv; | |
173 | ||
174 | /* Select interface A, otherwise communication will fail. */ | |
175 | ret = ftdi_set_interface(devc->ftdic, INTERFACE_A); | |
176 | if (ret < 0) { | |
177 | sr_err("Failed to set FTDI interface A (%d): %s", ret, | |
178 | ftdi_get_error_string(devc->ftdic)); | |
179 | return SR_ERR; | |
180 | } | |
181 | sr_dbg("FTDI chip interface A set successfully."); | |
182 | ||
183 | /* Open the device. */ | |
184 | ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID, | |
185 | USB_IPRODUCT, NULL); | |
186 | if (ret < 0) { | |
187 | sr_err("Failed to open device (%d): %s", ret, | |
188 | ftdi_get_error_string(devc->ftdic)); | |
189 | return SR_ERR; | |
190 | } | |
191 | sr_dbg("FTDI device opened successfully."); | |
192 | ||
193 | /* Purge RX/TX buffers in the FTDI chip. */ | |
194 | if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) { | |
195 | sr_err("Failed to purge FTDI RX/TX buffers (%d): %s.", | |
196 | ret, ftdi_get_error_string(devc->ftdic)); | |
197 | goto err_dev_open_close_ftdic; | |
198 | } | |
199 | sr_dbg("FTDI chip buffers purged successfully."); | |
200 | ||
201 | /* Reset the FTDI bitmode. */ | |
202 | ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_RESET); | |
203 | if (ret < 0) { | |
204 | sr_err("Failed to reset the FTDI chip bitmode (%d): %s.", | |
205 | ret, ftdi_get_error_string(devc->ftdic)); | |
206 | goto err_dev_open_close_ftdic; | |
207 | } | |
208 | sr_dbg("FTDI chip bitmode reset successfully."); | |
209 | ||
210 | /* Set FTDI bitmode to "sync FIFO". */ | |
211 | ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_SYNCFF); | |
212 | if (ret < 0) { | |
213 | sr_err("Failed to put FTDI chip into sync FIFO mode (%d): %s.", | |
214 | ret, ftdi_get_error_string(devc->ftdic)); | |
215 | goto err_dev_open_close_ftdic; | |
216 | } | |
217 | sr_dbg("FTDI chip sync FIFO mode entered successfully."); | |
218 | ||
219 | /* Set the FTDI latency timer to 2. */ | |
220 | ret = ftdi_set_latency_timer(devc->ftdic, 2); | |
221 | if (ret < 0) { | |
222 | sr_err("Failed to set FTDI latency timer (%d): %s.", | |
223 | ret, ftdi_get_error_string(devc->ftdic)); | |
224 | goto err_dev_open_close_ftdic; | |
225 | } | |
226 | sr_dbg("FTDI chip latency timer set successfully."); | |
227 | ||
228 | /* Set the FTDI read data chunk size to 64kB. */ | |
229 | ret = ftdi_read_data_set_chunksize(devc->ftdic, 64 * 1024); | |
230 | if (ret < 0) { | |
231 | sr_err("Failed to set FTDI read data chunk size (%d): %s.", | |
232 | ret, ftdi_get_error_string(devc->ftdic)); | |
233 | goto err_dev_open_close_ftdic; | |
234 | } | |
235 | sr_dbg("FTDI chip read data chunk size set successfully."); | |
236 | ||
237 | /* Get the ScanaPLUS device ID from the FTDI EEPROM. */ | |
238 | if ((ret = scanaplus_get_device_id(devc)) < 0) { | |
239 | sr_err("Failed to get ScanaPLUS device ID: %d.", ret); | |
240 | goto err_dev_open_close_ftdic; | |
241 | } | |
242 | sr_dbg("Received ScanaPLUS device ID successfully: %02x %02x %02x.", | |
243 | devc->devid[0], devc->devid[1], devc->devid[2]); | |
244 | ||
245 | sdi->status = SR_ST_ACTIVE; | |
246 | ||
247 | return SR_OK; | |
248 | ||
249 | err_dev_open_close_ftdic: | |
250 | scanaplus_close(devc); | |
251 | return SR_ERR; | |
252 | } | |
253 | ||
254 | static int dev_close(struct sr_dev_inst *sdi) | |
255 | { | |
256 | int ret; | |
257 | struct dev_context *devc; | |
258 | ||
259 | ret = SR_OK; | |
260 | devc = sdi->priv; | |
261 | ||
262 | if (sdi->status == SR_ST_ACTIVE) { | |
263 | sr_dbg("Status ACTIVE, closing device."); | |
264 | ret = scanaplus_close(devc); | |
265 | } else { | |
266 | sr_spew("Status not ACTIVE, nothing to do."); | |
267 | } | |
268 | ||
269 | sdi->status = SR_ST_INACTIVE; | |
270 | ||
271 | return ret; | |
272 | } | |
273 | ||
274 | static int cleanup(void) | |
275 | { | |
276 | return dev_clear(); | |
277 | } | |
278 | ||
279 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
280 | const struct sr_channel_group *cg) | |
281 | { | |
282 | (void)sdi; | |
283 | (void)cg; | |
284 | ||
285 | switch (key) { | |
286 | case SR_CONF_SAMPLERATE: | |
287 | /* The ScanaPLUS samplerate is 100MHz and can't be changed. */ | |
288 | *data = g_variant_new_uint64(SR_MHZ(100)); | |
289 | break; | |
290 | default: | |
291 | return SR_ERR_NA; | |
292 | } | |
293 | ||
294 | return SR_OK; | |
295 | } | |
296 | ||
297 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, | |
298 | const struct sr_channel_group *cg) | |
299 | { | |
300 | struct dev_context *devc; | |
301 | ||
302 | (void)cg; | |
303 | ||
304 | if (sdi->status != SR_ST_ACTIVE) | |
305 | return SR_ERR_DEV_CLOSED; | |
306 | ||
307 | devc = sdi->priv; | |
308 | ||
309 | switch (key) { | |
310 | case SR_CONF_SAMPLERATE: | |
311 | if (g_variant_get_uint64(data) != SR_MHZ(100)) { | |
312 | sr_err("ScanaPLUS only supports samplerate = 100MHz."); | |
313 | return SR_ERR_ARG; | |
314 | } | |
315 | /* Nothing to do, the ScanaPLUS samplerate is always 100MHz. */ | |
316 | break; | |
317 | case SR_CONF_LIMIT_MSEC: | |
318 | if (g_variant_get_uint64(data) == 0) | |
319 | return SR_ERR_ARG; | |
320 | devc->limit_msec = g_variant_get_uint64(data); | |
321 | break; | |
322 | case SR_CONF_LIMIT_SAMPLES: | |
323 | if (g_variant_get_uint64(data) == 0) | |
324 | return SR_ERR_ARG; | |
325 | devc->limit_samples = g_variant_get_uint64(data); | |
326 | break; | |
327 | default: | |
328 | return SR_ERR_NA; | |
329 | } | |
330 | ||
331 | return SR_OK; | |
332 | } | |
333 | ||
334 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
335 | const struct sr_channel_group *cg) | |
336 | { | |
337 | GVariant *gvar; | |
338 | GVariantBuilder gvb; | |
339 | ||
340 | (void)sdi; | |
341 | (void)cg; | |
342 | ||
343 | switch (key) { | |
344 | case SR_CONF_DEVICE_OPTIONS: | |
345 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
346 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); | |
347 | break; | |
348 | case SR_CONF_SAMPLERATE: | |
349 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
350 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
351 | samplerates, ARRAY_SIZE(samplerates), | |
352 | sizeof(uint64_t)); | |
353 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
354 | *data = g_variant_builder_end(&gvb); | |
355 | break; | |
356 | default: | |
357 | return SR_ERR_NA; | |
358 | } | |
359 | ||
360 | return SR_OK; | |
361 | } | |
362 | ||
363 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data) | |
364 | { | |
365 | int ret; | |
366 | struct dev_context *devc; | |
367 | ||
368 | if (sdi->status != SR_ST_ACTIVE) | |
369 | return SR_ERR_DEV_CLOSED; | |
370 | ||
371 | if (!(devc = sdi->priv)) | |
372 | return SR_ERR_BUG; | |
373 | ||
374 | if (!devc->ftdic) | |
375 | return SR_ERR_BUG; | |
376 | ||
377 | /* TODO: Configure channels later (thresholds etc.). */ | |
378 | ||
379 | devc->cb_data = cb_data; | |
380 | ||
381 | /* Properly reset internal variables before every new acquisition. */ | |
382 | devc->compressed_bytes_ignored = 0; | |
383 | devc->samples_sent = 0; | |
384 | devc->bytes_received = 0; | |
385 | ||
386 | if ((ret = scanaplus_init(devc)) < 0) | |
387 | return ret; | |
388 | ||
389 | if ((ret = scanaplus_start_acquisition(devc)) < 0) | |
390 | return ret; | |
391 | ||
392 | /* Send header packet to the session bus. */ | |
393 | std_session_send_df_header(sdi, LOG_PREFIX); | |
394 | ||
395 | /* Hook up a dummy handler to receive data from the device. */ | |
396 | sr_session_source_add(sdi->session, -1, G_IO_IN, 0, scanaplus_receive_data, (void *)sdi); | |
397 | ||
398 | return SR_OK; | |
399 | } | |
400 | ||
401 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
402 | { | |
403 | struct sr_datafeed_packet packet; | |
404 | ||
405 | (void)cb_data; | |
406 | ||
407 | sr_dbg("Stopping acquisition."); | |
408 | sr_session_source_remove(sdi->session, -1); | |
409 | ||
410 | /* Send end packet to the session bus. */ | |
411 | sr_dbg("Sending SR_DF_END."); | |
412 | packet.type = SR_DF_END; | |
413 | sr_session_send(sdi, &packet); | |
414 | ||
415 | return SR_OK; | |
416 | } | |
417 | ||
418 | SR_PRIV struct sr_dev_driver ikalogic_scanaplus_driver_info = { | |
419 | .name = "ikalogic-scanaplus", | |
420 | .longname = "IKALOGIC ScanaPLUS", | |
421 | .api_version = 1, | |
422 | .init = init, | |
423 | .cleanup = cleanup, | |
424 | .scan = scan, | |
425 | .dev_list = dev_list, | |
426 | .dev_clear = dev_clear, | |
427 | .config_get = config_get, | |
428 | .config_set = config_set, | |
429 | .config_list = config_list, | |
430 | .dev_open = dev_open, | |
431 | .dev_close = dev_close, | |
432 | .dev_acquisition_start = dev_acquisition_start, | |
433 | .dev_acquisition_stop = dev_acquisition_stop, | |
434 | .priv = NULL, | |
435 | }; |