]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2012 Bert Vermeulen <bert@biot.com> | |
5 | * With protocol information from the hantekdso project, | |
6 | * Copyright (C) 2008 Oleg Khudyakov <prcoder@gmail.com> | |
7 | * | |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
22 | #include <config.h> | |
23 | #include <string.h> | |
24 | #include <glib.h> | |
25 | #include <libusb.h> | |
26 | #include <libsigrok/libsigrok.h> | |
27 | #include "libsigrok-internal.h" | |
28 | #include "protocol.h" | |
29 | ||
30 | static int send_begin(const struct sr_dev_inst *sdi) | |
31 | { | |
32 | struct sr_usb_dev_inst *usb; | |
33 | int ret; | |
34 | unsigned char buffer[] = {0x0f, 0x03, 0x03, 0x03, 0x68, 0xac, 0xfe, | |
35 | 0x00, 0x01, 0x00}; | |
36 | ||
37 | sr_dbg("Sending CTRL_BEGINCOMMAND."); | |
38 | ||
39 | usb = sdi->conn; | |
40 | if ((ret = libusb_control_transfer(usb->devhdl, | |
41 | LIBUSB_REQUEST_TYPE_VENDOR, CTRL_BEGINCOMMAND, | |
42 | 0, 0, buffer, sizeof(buffer), 200)) != sizeof(buffer)) { | |
43 | sr_err("Failed to send begincommand: %s.", | |
44 | libusb_error_name(ret)); | |
45 | return SR_ERR; | |
46 | } | |
47 | ||
48 | return SR_OK; | |
49 | } | |
50 | ||
51 | static int send_bulkcmd(const struct sr_dev_inst *sdi, uint8_t *cmdstring, int cmdlen) | |
52 | { | |
53 | struct sr_usb_dev_inst *usb; | |
54 | int ret, tmp; | |
55 | ||
56 | usb = sdi->conn; | |
57 | ||
58 | if (send_begin(sdi) != SR_OK) | |
59 | return SR_ERR; | |
60 | ||
61 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, cmdstring, | |
62 | cmdlen, &tmp, 200)) != 0) | |
63 | return SR_ERR; | |
64 | ||
65 | return SR_OK; | |
66 | } | |
67 | ||
68 | static int dso_getmps(libusb_device *dev) | |
69 | { | |
70 | struct libusb_device_descriptor des; | |
71 | struct libusb_config_descriptor *conf_dsc; | |
72 | const struct libusb_interface_descriptor *intf_dsc; | |
73 | int mps; | |
74 | ||
75 | libusb_get_device_descriptor(dev, &des); | |
76 | ||
77 | if (des.bNumConfigurations != 1) | |
78 | return 0; | |
79 | ||
80 | if (libusb_get_config_descriptor(dev, 0, &conf_dsc) != 0) | |
81 | return 0; | |
82 | ||
83 | mps = 0; | |
84 | intf_dsc = &(conf_dsc->interface[0].altsetting[0]); | |
85 | if (intf_dsc->bNumEndpoints != 2) | |
86 | goto err; | |
87 | ||
88 | if ((intf_dsc->endpoint[0].bEndpointAddress & 0x8f) != | |
89 | (2 | LIBUSB_ENDPOINT_OUT)) | |
90 | /* The first endpoint should be 2 (outbound). */ | |
91 | goto err; | |
92 | ||
93 | if ((intf_dsc->endpoint[1].bEndpointAddress & 0x8f) != | |
94 | (6 | LIBUSB_ENDPOINT_IN)) | |
95 | /* The second endpoint should be 6 (inbound). */ | |
96 | goto err; | |
97 | ||
98 | mps = intf_dsc->endpoint[1].wMaxPacketSize; | |
99 | ||
100 | err: | |
101 | if (conf_dsc) | |
102 | libusb_free_config_descriptor(conf_dsc); | |
103 | ||
104 | return mps; | |
105 | } | |
106 | ||
107 | SR_PRIV int dso_open(struct sr_dev_inst *sdi) | |
108 | { | |
109 | struct dev_context *devc; | |
110 | struct drv_context *drvc = sdi->driver->context; | |
111 | struct sr_usb_dev_inst *usb; | |
112 | struct libusb_device_descriptor des; | |
113 | libusb_device **devlist; | |
114 | int err, i; | |
115 | char connection_id[64]; | |
116 | ||
117 | devc = sdi->priv; | |
118 | usb = sdi->conn; | |
119 | ||
120 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
121 | for (i = 0; devlist[i]; i++) { | |
122 | libusb_get_device_descriptor(devlist[i], &des); | |
123 | ||
124 | if (des.idVendor != devc->profile->fw_vid | |
125 | || des.idProduct != devc->profile->fw_pid) | |
126 | continue; | |
127 | ||
128 | if ((sdi->status == SR_ST_INITIALIZING) || | |
129 | (sdi->status == SR_ST_INACTIVE)) { | |
130 | /* | |
131 | * Check device by its physical USB bus/port address. | |
132 | */ | |
133 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
134 | if (strcmp(sdi->connection_id, connection_id)) | |
135 | /* This is not the one. */ | |
136 | continue; | |
137 | } | |
138 | ||
139 | if (!(err = libusb_open(devlist[i], &usb->devhdl))) { | |
140 | if (usb->address == 0xff) | |
141 | /* | |
142 | * first time we touch this device after firmware upload, | |
143 | * so we don't know the address yet. | |
144 | */ | |
145 | usb->address = libusb_get_device_address(devlist[i]); | |
146 | ||
147 | if (!(devc->epin_maxpacketsize = dso_getmps(devlist[i]))) | |
148 | sr_err("Wrong endpoint profile."); | |
149 | else { | |
150 | sdi->status = SR_ST_ACTIVE; | |
151 | sr_info("Opened device on %d.%d (logical) / " | |
152 | "%s (physical) interface %d.", | |
153 | usb->bus, usb->address, | |
154 | sdi->connection_id, USB_INTERFACE); | |
155 | } | |
156 | } else { | |
157 | sr_err("Failed to open device: %s.", | |
158 | libusb_error_name(err)); | |
159 | } | |
160 | ||
161 | /* If we made it here, we handled the device (somehow). */ | |
162 | break; | |
163 | } | |
164 | libusb_free_device_list(devlist, 1); | |
165 | ||
166 | if (sdi->status != SR_ST_ACTIVE) | |
167 | return SR_ERR; | |
168 | ||
169 | return SR_OK; | |
170 | } | |
171 | ||
172 | SR_PRIV void dso_close(struct sr_dev_inst *sdi) | |
173 | { | |
174 | struct sr_usb_dev_inst *usb; | |
175 | ||
176 | usb = sdi->conn; | |
177 | ||
178 | if (!usb->devhdl) | |
179 | return; | |
180 | ||
181 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
182 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
183 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
184 | libusb_close(usb->devhdl); | |
185 | usb->devhdl = NULL; | |
186 | sdi->status = SR_ST_INACTIVE; | |
187 | ||
188 | } | |
189 | ||
190 | static int get_channel_offsets(const struct sr_dev_inst *sdi) | |
191 | { | |
192 | struct dev_context *devc; | |
193 | struct sr_usb_dev_inst *usb; | |
194 | GString *gs; | |
195 | int chan, v, ret; | |
196 | ||
197 | sr_dbg("Getting channel offsets."); | |
198 | ||
199 | devc = sdi->priv; | |
200 | usb = sdi->conn; | |
201 | ||
202 | ret = libusb_control_transfer(usb->devhdl, | |
203 | LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR, | |
204 | CTRL_READ_EEPROM, EEPROM_CHANNEL_OFFSETS, 0, | |
205 | (unsigned char *)&devc->channel_levels, | |
206 | sizeof(devc->channel_levels), 200); | |
207 | if (ret != sizeof(devc->channel_levels)) { | |
208 | sr_err("Failed to get channel offsets: %s.", | |
209 | libusb_error_name(ret)); | |
210 | return SR_ERR; | |
211 | } | |
212 | ||
213 | /* Comes in as 16-bit numbers with the second byte always 0 on | |
214 | * the DSO-2090. Guessing this is supposed to be big-endian, | |
215 | * since that's how voltage offsets are submitted back to the DSO. | |
216 | * Convert to host order now, so we can use them natively. | |
217 | */ | |
218 | for (chan = 0; chan < NUM_CHANNELS; chan++) { | |
219 | for (v = 0; v < 9; v++) { | |
220 | devc->channel_levels[chan][v][0] = | |
221 | g_ntohs(devc->channel_levels[chan][v][0]); | |
222 | devc->channel_levels[chan][v][1] = | |
223 | g_ntohs(devc->channel_levels[chan][v][1]); | |
224 | } | |
225 | } | |
226 | ||
227 | if (sr_log_loglevel_get() >= SR_LOG_DBG) { | |
228 | gs = g_string_sized_new(128); | |
229 | for (chan = 0; chan < NUM_CHANNELS; chan++) { | |
230 | g_string_printf(gs, "CH%d:", chan + 1); | |
231 | for (v = 0; v < 9; v++) { | |
232 | g_string_append_printf(gs, " %.4x-%.4x", | |
233 | devc->channel_levels[chan][v][0], | |
234 | devc->channel_levels[chan][v][1]); | |
235 | } | |
236 | sr_dbg("%s", gs->str); | |
237 | } | |
238 | g_string_free(gs, TRUE); | |
239 | } | |
240 | ||
241 | return SR_OK; | |
242 | } | |
243 | ||
244 | ||
245 | static void dso2250_set_triggerpos(int value, int long_buffer, uint8_t dest[], int offset) | |
246 | { | |
247 | uint32_t min, max; | |
248 | uint32_t tmp, diff; | |
249 | ||
250 | min = long_buffer ? 0 : 0x7d7ff; | |
251 | max = 0x7ffff; | |
252 | ||
253 | diff = max - min; | |
254 | tmp = min + diff * value / 100; | |
255 | sr_dbg("2250 trigger pos: %3d%% * [0x%x,0x%x] == 0x%x", value, min, max, tmp); | |
256 | ||
257 | dest[offset + 0] = tmp & 0xff; | |
258 | dest[offset + 1] = (tmp >> 8) & 0xff; | |
259 | dest[offset + 2] = (tmp >> 16) & 0x7; | |
260 | } | |
261 | ||
262 | ||
263 | /* See http://openhantek.sourceforge.net/doc/namespaceHantek.html#ac1cd181814cf3da74771c29800b39028 */ | |
264 | static int dso2250_set_trigger_samplerate(const struct sr_dev_inst *sdi) | |
265 | { | |
266 | struct dev_context *devc; | |
267 | struct sr_usb_dev_inst *usb; | |
268 | int ret, tmp; | |
269 | int base; | |
270 | uint8_t cmdstring[12]; | |
271 | int trig; | |
272 | ||
273 | ||
274 | devc = sdi->priv; | |
275 | usb = sdi->conn; | |
276 | ||
277 | memset(cmdstring, 0, sizeof(cmdstring)); | |
278 | /* Command */ | |
279 | cmdstring[0] = CMD_2250_SET_TRIGGERSOURCE; | |
280 | sr_dbg("Trigger source %s.", devc->triggersource); | |
281 | if (!strcmp("CH2", devc->triggersource)) | |
282 | tmp = 3; | |
283 | else if (!strcmp("CH1", devc->triggersource)) | |
284 | tmp = 2; | |
285 | else if (!strcmp("EXT", devc->triggersource)) | |
286 | tmp = 0; | |
287 | else { | |
288 | sr_err("Invalid trigger source: '%s'.", devc->triggersource); | |
289 | return SR_ERR_ARG; | |
290 | } | |
291 | cmdstring[2] = tmp; | |
292 | ||
293 | ||
294 | sr_dbg("Trigger slope: %d.", devc->triggerslope); | |
295 | cmdstring[2] |= (devc->triggerslope == SLOPE_NEGATIVE ? 1 : 0) << 3; | |
296 | ||
297 | if (send_begin(sdi) != SR_OK) | |
298 | return SR_ERR; | |
299 | ||
300 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
301 | cmdstring, 8, &tmp, 100)) != 0) { | |
302 | sr_err("Failed to set trigger/samplerate: %s.", | |
303 | libusb_error_name(ret)); | |
304 | return SR_ERR; | |
305 | } | |
306 | ||
307 | ||
308 | /* Frame size */ | |
309 | sr_dbg("Frame size: %d.", devc->framesize); | |
310 | cmdstring[0] = CMD_2250_SET_RECORD_LENGTH; | |
311 | cmdstring[2] = devc->framesize == FRAMESIZE_SMALL ? 0x01 : 0x02; | |
312 | ||
313 | if (send_begin(sdi) != SR_OK) | |
314 | return SR_ERR; | |
315 | ||
316 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
317 | cmdstring, 4, &tmp, 100)) != 0) { | |
318 | sr_err("Failed to set record length: %s.", | |
319 | libusb_error_name(ret)); | |
320 | return SR_ERR; | |
321 | } | |
322 | ||
323 | ||
324 | memset(cmdstring, 0, sizeof(cmdstring)); | |
325 | cmdstring[0] = CMD_2250_SET_SAMPLERATE; | |
326 | sr_dbg("Sample rate: %u", devc->samplerate); | |
327 | base = 100e6; | |
328 | if (devc->samplerate > base) { | |
329 | /* Timebase fast */ | |
330 | sr_err("Sample rate > 100MHz not yet supported."); | |
331 | return SR_ERR_ARG; | |
332 | } | |
333 | ||
334 | tmp = base / devc->samplerate; | |
335 | sr_dbg("sample rate value: %d.", devc->samplerate); | |
336 | if (tmp) { | |
337 | /* Downsampling on */ | |
338 | cmdstring[2] |= 2; | |
339 | /* Downsampler = 1comp((Base / Samplerate) - 2) | |
340 | * Base == 100Msa resp. 200MSa | |
341 | * | |
342 | * Example for 500kSa/s: | |
343 | * 100e6 / 500e3 => 200 | |
344 | * 200 - 2 => 198 | |
345 | * 1comp(198) => ff39 */ | |
346 | tmp -= 2; | |
347 | tmp = ~tmp; | |
348 | sr_dbg("down sampler value: 0x%x.", tmp & 0xffff); | |
349 | cmdstring[4] = (tmp >> 0) & 0xff; | |
350 | cmdstring[5] = (tmp >> 8) & 0xff; | |
351 | } | |
352 | ||
353 | if (send_begin(sdi) != SR_OK) | |
354 | return SR_ERR; | |
355 | ||
356 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
357 | cmdstring, 8, &tmp, 100)) != 0) { | |
358 | sr_err("Failed to set sample rate: %s.", | |
359 | libusb_error_name(ret)); | |
360 | return SR_ERR; | |
361 | } | |
362 | sr_dbg("Sent CMD_2250_SET_SAMPLERATE."); | |
363 | ||
364 | ||
365 | /* Enabled channels: 00=CH1 01=CH2 10=both */ | |
366 | memset(cmdstring, 0, sizeof(cmdstring)); | |
367 | cmdstring[0] = CMD_2250_SET_CHANNELS; | |
368 | sr_dbg("Channels CH1=%d CH2=%d", devc->ch_enabled[0], devc->ch_enabled[1]); | |
369 | cmdstring[2] = (devc->ch_enabled[0] ? 0 : 1) + (devc->ch_enabled[1] ? 2 : 0); | |
370 | ||
371 | if (send_begin(sdi) != SR_OK) | |
372 | return SR_ERR; | |
373 | ||
374 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
375 | cmdstring, 4, &tmp, 100)) != 0) { | |
376 | sr_err("Failed to set channels: %s.", | |
377 | libusb_error_name(ret)); | |
378 | return SR_ERR; | |
379 | } | |
380 | sr_dbg("Sent CMD_2250_SET_CHANNELS."); | |
381 | ||
382 | ||
383 | ||
384 | /* Trigger slope: 0=positive 1=negative */ | |
385 | memset(cmdstring, 0, sizeof(cmdstring)); | |
386 | cmdstring[0] = CMD_2250_SET_TRIGGERPOS_AND_BUFFER; | |
387 | ||
388 | sr_dbg("Capture ratio: %d.", devc->capture_ratio); | |
389 | trig = devc->capture_ratio; | |
390 | dso2250_set_triggerpos(trig, | |
391 | devc->framesize != FRAMESIZE_SMALL, cmdstring, 2); | |
392 | dso2250_set_triggerpos(100 - trig, | |
393 | devc->framesize != FRAMESIZE_SMALL, cmdstring, 6); | |
394 | ||
395 | if (send_begin(sdi) != SR_OK) | |
396 | return SR_ERR; | |
397 | ||
398 | /* TODO: 12 bytes according to documentation? */ | |
399 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
400 | cmdstring, 10, &tmp, 100)) != 0) { | |
401 | sr_err("Failed to set trigger position: %s.", | |
402 | libusb_error_name(ret)); | |
403 | return SR_ERR; | |
404 | } | |
405 | ||
406 | return SR_OK; | |
407 | } | |
408 | ||
409 | int dso_set_trigger_samplerate(const struct sr_dev_inst *sdi) | |
410 | { | |
411 | struct dev_context *devc; | |
412 | struct sr_usb_dev_inst *usb; | |
413 | int ret, tmp; | |
414 | uint8_t cmdstring[12]; | |
415 | uint16_t timebase_small[] = { 0xffff, 0xfffc, 0xfff7, 0xffe8, 0xffce, | |
416 | 0xff9c, 0xff07, 0xfe0d, 0xfc19, 0xf63d, 0xec79, 0xd8f1 }; | |
417 | uint16_t timebase_large[] = { 0xffff, 0x0000, 0xfffc, 0xfff7, 0xffe8, | |
418 | 0xffce, 0xff9d, 0xff07, 0xfe0d, 0xfc19, 0xf63d, 0xec79 }; | |
419 | ||
420 | devc = sdi->priv; | |
421 | if (devc->profile->fw_pid == 0x2250) | |
422 | return dso2250_set_trigger_samplerate(sdi); | |
423 | ||
424 | sr_dbg("Preparing CMD_SET_TRIGGER_SAMPLERATE."); | |
425 | ||
426 | usb = sdi->conn; | |
427 | ||
428 | memset(cmdstring, 0, sizeof(cmdstring)); | |
429 | /* Command */ | |
430 | cmdstring[0] = CMD_SET_TRIGGER_SAMPLERATE; | |
431 | ||
432 | /* Trigger source */ | |
433 | sr_dbg("Trigger source %s.", devc->triggersource); | |
434 | if (!strcmp("CH2", devc->triggersource)) | |
435 | tmp = 0; | |
436 | else if (!strcmp("CH1", devc->triggersource)) | |
437 | tmp = 1; | |
438 | else if (!strcmp("EXT", devc->triggersource)) | |
439 | tmp = 2; | |
440 | else { | |
441 | sr_err("Invalid trigger source: '%s'.", devc->triggersource); | |
442 | return SR_ERR_ARG; | |
443 | } | |
444 | cmdstring[2] = tmp; | |
445 | ||
446 | /* Frame size */ | |
447 | sr_dbg("Frame size: %d.", devc->framesize); | |
448 | cmdstring[2] |= (devc->framesize == FRAMESIZE_SMALL ? 0x01 : 0x02) << 2; | |
449 | ||
450 | /* Timebase fast */ | |
451 | sr_dbg("Time base index: %d.", devc->timebase); | |
452 | if (devc->framesize == FRAMESIZE_SMALL) { | |
453 | if (devc->timebase < TIME_20us) | |
454 | tmp = 0; | |
455 | else if (devc->timebase == TIME_20us) | |
456 | tmp = 1; | |
457 | else if (devc->timebase == TIME_40us) | |
458 | tmp = 2; | |
459 | else if (devc->timebase == TIME_100us) | |
460 | tmp = 3; | |
461 | else if (devc->timebase >= TIME_200us) | |
462 | tmp = 4; | |
463 | } else { | |
464 | if (devc->timebase < TIME_40us) { | |
465 | sr_err("Timebase < 40us only supported with 10K buffer."); | |
466 | return SR_ERR_ARG; | |
467 | } | |
468 | else if (devc->timebase == TIME_40us) | |
469 | tmp = 0; | |
470 | else if (devc->timebase == TIME_100us) | |
471 | tmp = 2; | |
472 | else if (devc->timebase == TIME_200us) | |
473 | tmp = 3; | |
474 | else if (devc->timebase >= TIME_400us) | |
475 | tmp = 4; | |
476 | } | |
477 | cmdstring[2] |= (tmp & 0x07) << 5; | |
478 | ||
479 | /* Enabled channels: 00=CH1 01=CH2 10=both */ | |
480 | sr_dbg("Channels CH1=%d CH2=%d", devc->ch_enabled[0], devc->ch_enabled[1]); | |
481 | tmp = (((devc->ch_enabled[1] ? 1 : 0) << 1) + (devc->ch_enabled[0] ? 1 : 0)) - 1; | |
482 | cmdstring[3] = tmp; | |
483 | ||
484 | /* Fast rates channel */ | |
485 | /* TODO: Is this right? */ | |
486 | tmp = devc->timebase < TIME_10us ? 1 : 0; | |
487 | cmdstring[3] |= tmp << 2; | |
488 | ||
489 | /* Trigger slope: 0=positive 1=negative */ | |
490 | /* TODO: Does this work? */ | |
491 | sr_dbg("Trigger slope: %d.", devc->triggerslope); | |
492 | cmdstring[3] |= (devc->triggerslope == SLOPE_NEGATIVE ? 1 : 0) << 3; | |
493 | ||
494 | /* Timebase slow */ | |
495 | if (devc->timebase < TIME_100us) | |
496 | tmp = 0; | |
497 | else if (devc->timebase > TIME_400ms) | |
498 | tmp = 0xffed; | |
499 | else { | |
500 | if (devc->framesize == FRAMESIZE_SMALL) | |
501 | tmp = timebase_small[devc->timebase - 3]; | |
502 | else | |
503 | tmp = timebase_large[devc->timebase - 3]; | |
504 | } | |
505 | cmdstring[4] = tmp & 0xff; | |
506 | cmdstring[5] = (tmp >> 8) & 0xff; | |
507 | ||
508 | /* Horizontal trigger position */ | |
509 | sr_dbg("Capture ratio: %d.", devc->capture_ratio); | |
510 | tmp = 0x77fff + 0x8000 * devc->capture_ratio / 100; | |
511 | cmdstring[6] = tmp & 0xff; | |
512 | cmdstring[7] = (tmp >> 8) & 0xff; | |
513 | cmdstring[10] = (tmp >> 16) & 0xff; | |
514 | ||
515 | if (send_begin(sdi) != SR_OK) | |
516 | return SR_ERR; | |
517 | ||
518 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
519 | cmdstring, sizeof(cmdstring), &tmp, 100)) != 0) { | |
520 | sr_err("Failed to set trigger/samplerate: %s.", | |
521 | libusb_error_name(ret)); | |
522 | return SR_ERR; | |
523 | } | |
524 | sr_dbg("Sent CMD_SET_TRIGGER_SAMPLERATE."); | |
525 | ||
526 | return SR_OK; | |
527 | } | |
528 | ||
529 | ||
530 | static int dso_set_filters(const struct sr_dev_inst *sdi) | |
531 | { | |
532 | struct dev_context *devc; | |
533 | struct sr_usb_dev_inst *usb; | |
534 | int ret, tmp; | |
535 | uint8_t cmdstring[8]; | |
536 | ||
537 | sr_dbg("Preparing CMD_SET_FILTERS."); | |
538 | ||
539 | devc = sdi->priv; | |
540 | usb = sdi->conn; | |
541 | ||
542 | memset(cmdstring, 0, sizeof(cmdstring)); | |
543 | cmdstring[0] = CMD_SET_FILTERS; | |
544 | cmdstring[1] = 0x0f; | |
545 | if (devc->filter[0]) { | |
546 | sr_dbg("Turning on CH1 filter."); | |
547 | cmdstring[2] |= 0x80; | |
548 | } | |
549 | if (devc->filter[1]) { | |
550 | sr_dbg("Turning on CH2 filter."); | |
551 | cmdstring[2] |= 0x40; | |
552 | } | |
553 | /* | |
554 | * Not supported: filtering on the trigger | |
555 | * cmdstring[2] |= 0x20; | |
556 | */ | |
557 | ||
558 | if (send_begin(sdi) != SR_OK) | |
559 | return SR_ERR; | |
560 | ||
561 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
562 | cmdstring, sizeof(cmdstring), &tmp, 100)) != 0) { | |
563 | sr_err("Failed to set filters: %s.", libusb_error_name(ret)); | |
564 | return SR_ERR; | |
565 | } | |
566 | sr_dbg("Sent CMD_SET_FILTERS."); | |
567 | ||
568 | return SR_OK; | |
569 | } | |
570 | ||
571 | static int dso_set_voltage(const struct sr_dev_inst *sdi) | |
572 | { | |
573 | struct dev_context *devc; | |
574 | struct sr_usb_dev_inst *usb; | |
575 | int ret, tmp; | |
576 | uint8_t cmdstring[8]; | |
577 | ||
578 | sr_dbg("Preparing CMD_SET_VOLTAGE."); | |
579 | ||
580 | devc = sdi->priv; | |
581 | usb = sdi->conn; | |
582 | ||
583 | memset(cmdstring, 0, sizeof(cmdstring)); | |
584 | cmdstring[0] = CMD_SET_VOLTAGE; | |
585 | ||
586 | if (devc->profile->fw_pid == 0x2250) { | |
587 | cmdstring[2] = 0x08; | |
588 | } else { | |
589 | cmdstring[1] = 0x0f; | |
590 | cmdstring[2] = 0x30; | |
591 | } | |
592 | ||
593 | /* CH1 volts/div is encoded in bits 0-1 */ | |
594 | sr_dbg("CH1 vdiv index: %d.", devc->voltage[0]); | |
595 | switch (devc->voltage[0]) { | |
596 | case VDIV_1V: | |
597 | case VDIV_100MV: | |
598 | case VDIV_10MV: | |
599 | cmdstring[2] |= 0x00; | |
600 | break; | |
601 | case VDIV_2V: | |
602 | case VDIV_200MV: | |
603 | case VDIV_20MV: | |
604 | cmdstring[2] |= 0x01; | |
605 | break; | |
606 | case VDIV_5V: | |
607 | case VDIV_500MV: | |
608 | case VDIV_50MV: | |
609 | cmdstring[2] |= 0x02; | |
610 | break; | |
611 | } | |
612 | ||
613 | /* CH2 volts/div is encoded in bits 2-3 */ | |
614 | sr_dbg("CH2 vdiv index: %d.", devc->voltage[1]); | |
615 | switch (devc->voltage[1]) { | |
616 | case VDIV_1V: | |
617 | case VDIV_100MV: | |
618 | case VDIV_10MV: | |
619 | cmdstring[2] |= 0x00; | |
620 | break; | |
621 | case VDIV_2V: | |
622 | case VDIV_200MV: | |
623 | case VDIV_20MV: | |
624 | cmdstring[2] |= 0x04; | |
625 | break; | |
626 | case VDIV_5V: | |
627 | case VDIV_500MV: | |
628 | case VDIV_50MV: | |
629 | cmdstring[2] |= 0x08; | |
630 | break; | |
631 | } | |
632 | ||
633 | if (send_begin(sdi) != SR_OK) | |
634 | return SR_ERR; | |
635 | ||
636 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
637 | cmdstring, sizeof(cmdstring), &tmp, 100)) != 0) { | |
638 | sr_err("Failed to set voltage: %s.", libusb_error_name(ret)); | |
639 | return SR_ERR; | |
640 | } | |
641 | sr_dbg("Sent CMD_SET_VOLTAGE."); | |
642 | ||
643 | return SR_OK; | |
644 | } | |
645 | ||
646 | static int dso_set_relays(const struct sr_dev_inst *sdi) | |
647 | { | |
648 | struct dev_context *devc; | |
649 | struct sr_usb_dev_inst *usb; | |
650 | GString *gs; | |
651 | int ret, i; | |
652 | uint8_t relays[17] = { 0x00, 0x04, 0x08, 0x02, 0x20, 0x40, 0x10, 0x01, | |
653 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; | |
654 | ||
655 | sr_dbg("Preparing CTRL_SETRELAYS."); | |
656 | ||
657 | devc = sdi->priv; | |
658 | usb = sdi->conn; | |
659 | ||
660 | if (devc->voltage[0] < VDIV_1V) | |
661 | relays[1] = ~relays[1]; | |
662 | ||
663 | if (devc->voltage[0] < VDIV_100MV) | |
664 | relays[2] = ~relays[2]; | |
665 | ||
666 | sr_dbg("CH1 coupling: %d.", devc->coupling[0]); | |
667 | if (devc->coupling[0] != COUPLING_AC) | |
668 | relays[3] = ~relays[3]; | |
669 | ||
670 | if (devc->voltage[1] < VDIV_1V) | |
671 | relays[4] = ~relays[4]; | |
672 | ||
673 | if (devc->voltage[1] < VDIV_100MV) | |
674 | relays[5] = ~relays[5]; | |
675 | ||
676 | sr_dbg("CH2 coupling: %d.", devc->coupling[1]); | |
677 | if (devc->coupling[1] != COUPLING_AC) | |
678 | relays[6] = ~relays[6]; | |
679 | ||
680 | if (!strcmp(devc->triggersource, "EXT")) | |
681 | relays[7] = ~relays[7]; | |
682 | ||
683 | if (sr_log_loglevel_get() >= SR_LOG_DBG) { | |
684 | gs = g_string_sized_new(128); | |
685 | g_string_printf(gs, "Relays:"); | |
686 | for (i = 0; i < 17; i++) | |
687 | g_string_append_printf(gs, " %.2x", relays[i]); | |
688 | sr_dbg("%s", gs->str); | |
689 | g_string_free(gs, TRUE); | |
690 | } | |
691 | ||
692 | if ((ret = libusb_control_transfer(usb->devhdl, | |
693 | LIBUSB_REQUEST_TYPE_VENDOR, CTRL_SETRELAYS, | |
694 | 0, 0, relays, 17, 100)) != sizeof(relays)) { | |
695 | sr_err("Failed to set relays: %s.", libusb_error_name(ret)); | |
696 | return SR_ERR; | |
697 | } | |
698 | sr_dbg("Sent CTRL_SETRELAYS."); | |
699 | ||
700 | return SR_OK; | |
701 | } | |
702 | ||
703 | int dso_set_voffsets(const struct sr_dev_inst *sdi) | |
704 | { | |
705 | struct dev_context *devc; | |
706 | struct sr_usb_dev_inst *usb; | |
707 | int offset, ret; | |
708 | uint16_t *ch_levels; | |
709 | uint8_t offsets[17]; | |
710 | ||
711 | sr_dbg("Preparing CTRL_SETOFFSET."); | |
712 | ||
713 | devc = sdi->priv; | |
714 | usb = sdi->conn; | |
715 | ||
716 | memset(offsets, 0, sizeof(offsets)); | |
717 | /* Channel 1 */ | |
718 | ch_levels = devc->channel_levels[0][devc->voltage[0]]; | |
719 | offset = (ch_levels[1] - ch_levels[0]) * devc->voffset_ch1 + ch_levels[0]; | |
720 | offsets[0] = (offset >> 8) | 0x20; | |
721 | offsets[1] = offset & 0xff; | |
722 | sr_dbg("CH1 offset: %3.2f (%.2x%.2x).", devc->voffset_ch1, | |
723 | offsets[0], offsets[1]); | |
724 | ||
725 | /* Channel 2 */ | |
726 | ch_levels = devc->channel_levels[1][devc->voltage[1]]; | |
727 | offset = (ch_levels[1] - ch_levels[0]) * devc->voffset_ch2 + ch_levels[0]; | |
728 | offsets[2] = (offset >> 8) | 0x20; | |
729 | offsets[3] = offset & 0xff; | |
730 | sr_dbg("CH2 offset: %3.2f (%.2x%.2x).", devc->voffset_ch2, | |
731 | offsets[2], offsets[3]); | |
732 | ||
733 | /* Trigger */ | |
734 | offset = MAX_VERT_TRIGGER * devc->voffset_trigger; | |
735 | offsets[4] = (offset >> 8) | 0x20; | |
736 | offsets[5] = offset & 0xff; | |
737 | sr_dbg("Trigger offset: %3.2f (%.2x%.2x).", devc->voffset_trigger, | |
738 | offsets[4], offsets[5]); | |
739 | ||
740 | if ((ret = libusb_control_transfer(usb->devhdl, | |
741 | LIBUSB_REQUEST_TYPE_VENDOR, CTRL_SETOFFSET, | |
742 | 0, 0, offsets, sizeof(offsets), 100)) != sizeof(offsets)) { | |
743 | sr_err("Failed to set offsets: %s.", libusb_error_name(ret)); | |
744 | return SR_ERR; | |
745 | } | |
746 | sr_dbg("Sent CTRL_SETOFFSET."); | |
747 | ||
748 | return SR_OK; | |
749 | } | |
750 | ||
751 | SR_PRIV int dso_enable_trigger(const struct sr_dev_inst *sdi) | |
752 | { | |
753 | struct sr_usb_dev_inst *usb; | |
754 | int ret, tmp; | |
755 | uint8_t cmdstring[2]; | |
756 | ||
757 | sr_dbg("Sending CMD_ENABLE_TRIGGER."); | |
758 | ||
759 | usb = sdi->conn; | |
760 | ||
761 | memset(cmdstring, 0, sizeof(cmdstring)); | |
762 | cmdstring[0] = CMD_ENABLE_TRIGGER; | |
763 | cmdstring[1] = 0x00; | |
764 | ||
765 | if (send_begin(sdi) != SR_OK) | |
766 | return SR_ERR; | |
767 | ||
768 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
769 | cmdstring, sizeof(cmdstring), &tmp, 100)) != 0) { | |
770 | sr_err("Failed to enable trigger: %s.", libusb_error_name(ret)); | |
771 | return SR_ERR; | |
772 | } | |
773 | ||
774 | return SR_OK; | |
775 | } | |
776 | ||
777 | SR_PRIV int dso_force_trigger(const struct sr_dev_inst *sdi) | |
778 | { | |
779 | struct sr_usb_dev_inst *usb; | |
780 | int ret, tmp; | |
781 | uint8_t cmdstring[2]; | |
782 | ||
783 | sr_dbg("Sending CMD_FORCE_TRIGGER."); | |
784 | ||
785 | usb = sdi->conn; | |
786 | ||
787 | memset(cmdstring, 0, sizeof(cmdstring)); | |
788 | cmdstring[0] = CMD_FORCE_TRIGGER; | |
789 | cmdstring[1] = 0x00; | |
790 | ||
791 | if (send_begin(sdi) != SR_OK) | |
792 | return SR_ERR; | |
793 | ||
794 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT, | |
795 | cmdstring, sizeof(cmdstring), &tmp, 100)) != 0) { | |
796 | sr_err("Failed to force trigger: %s.", libusb_error_name(ret)); | |
797 | return SR_ERR; | |
798 | } | |
799 | ||
800 | return SR_OK; | |
801 | } | |
802 | ||
803 | SR_PRIV int dso_init(const struct sr_dev_inst *sdi) | |
804 | { | |
805 | ||
806 | sr_dbg("Initializing DSO."); | |
807 | ||
808 | if (get_channel_offsets(sdi) != SR_OK) | |
809 | return SR_ERR; | |
810 | ||
811 | if (dso_set_trigger_samplerate(sdi) != SR_OK) | |
812 | return SR_ERR; | |
813 | ||
814 | if (dso_set_filters(sdi) != SR_OK) | |
815 | return SR_ERR; | |
816 | ||
817 | if (dso_set_voltage(sdi) != SR_OK) | |
818 | return SR_ERR; | |
819 | ||
820 | if (dso_set_relays(sdi) != SR_OK) | |
821 | return SR_ERR; | |
822 | ||
823 | if (dso_set_voffsets(sdi) != SR_OK) | |
824 | return SR_ERR; | |
825 | ||
826 | if (dso_enable_trigger(sdi) != SR_OK) | |
827 | return SR_ERR; | |
828 | ||
829 | return SR_OK; | |
830 | } | |
831 | ||
832 | SR_PRIV int dso_get_capturestate(const struct sr_dev_inst *sdi, | |
833 | uint8_t *capturestate, uint32_t *trigger_offset) | |
834 | { | |
835 | struct sr_usb_dev_inst *usb; | |
836 | int ret, tmp, i; | |
837 | unsigned int bitvalue, toff; | |
838 | uint8_t cmdstring[2], inbuf[512]; | |
839 | ||
840 | sr_dbg("Sending CMD_GET_CAPTURESTATE."); | |
841 | ||
842 | usb = sdi->conn; | |
843 | ||
844 | cmdstring[0] = CMD_GET_CAPTURESTATE; | |
845 | cmdstring[1] = 0; | |
846 | ||
847 | if ((ret = send_bulkcmd(sdi, cmdstring, sizeof(cmdstring))) != SR_OK) { | |
848 | sr_dbg("Failed to send get_capturestate command: %s.", | |
849 | libusb_error_name(ret)); | |
850 | return SR_ERR; | |
851 | } | |
852 | ||
853 | if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_IN, | |
854 | inbuf, 512, &tmp, 100)) != 0) { | |
855 | sr_dbg("Failed to get capturestate: %s.", | |
856 | libusb_error_name(ret)); | |
857 | return SR_ERR; | |
858 | } | |
859 | *capturestate = inbuf[0]; | |
860 | toff = (inbuf[1] << 16) | (inbuf[3] << 8) | inbuf[2]; | |
861 | ||
862 | /* | |
863 | * This conversion comes from the openhantek project. | |
864 | * Each set bit in the 24-bit value inverts all bits with a lower | |
865 | * value. No idea why the device reports the trigger point this way. | |
866 | */ | |
867 | bitvalue = 1; | |
868 | for (i = 0; i < 24; i++) { | |
869 | /* Each set bit inverts all bits with a lower value. */ | |
870 | if (toff & bitvalue) | |
871 | toff ^= bitvalue - 1; | |
872 | bitvalue <<= 1; | |
873 | } | |
874 | *trigger_offset = toff; | |
875 | ||
876 | return SR_OK; | |
877 | } | |
878 | ||
879 | SR_PRIV int dso_capture_start(const struct sr_dev_inst *sdi) | |
880 | { | |
881 | int ret; | |
882 | uint8_t cmdstring[2]; | |
883 | ||
884 | sr_dbg("Sending CMD_CAPTURE_START."); | |
885 | ||
886 | cmdstring[0] = CMD_CAPTURE_START; | |
887 | cmdstring[1] = 0; | |
888 | ||
889 | if ((ret = send_bulkcmd(sdi, cmdstring, sizeof(cmdstring))) != SR_OK) { | |
890 | sr_err("Failed to send capture_start command: %s.", | |
891 | libusb_error_name(ret)); | |
892 | return SR_ERR; | |
893 | } | |
894 | ||
895 | return SR_OK; | |
896 | } | |
897 | ||
898 | SR_PRIV int dso_get_channeldata(const struct sr_dev_inst *sdi, | |
899 | libusb_transfer_cb_fn cb) | |
900 | { | |
901 | struct dev_context *devc; | |
902 | struct sr_usb_dev_inst *usb; | |
903 | struct libusb_transfer *transfer; | |
904 | int num_transfers, ret, i; | |
905 | uint8_t cmdstring[2]; | |
906 | unsigned char *buf; | |
907 | ||
908 | sr_dbg("Sending CMD_GET_CHANNELDATA."); | |
909 | ||
910 | devc = sdi->priv; | |
911 | usb = sdi->conn; | |
912 | ||
913 | cmdstring[0] = CMD_GET_CHANNELDATA; | |
914 | cmdstring[1] = 0; | |
915 | ||
916 | if ((ret = send_bulkcmd(sdi, cmdstring, sizeof(cmdstring))) != SR_OK) { | |
917 | sr_err("Failed to get channel data: %s.", | |
918 | libusb_error_name(ret)); | |
919 | return SR_ERR; | |
920 | } | |
921 | ||
922 | /* TODO: DSO-2xxx only. */ | |
923 | num_transfers = devc->framesize * | |
924 | sizeof(unsigned short) / devc->epin_maxpacketsize; | |
925 | sr_dbg("Queueing up %d transfers.", num_transfers); | |
926 | for (i = 0; i < num_transfers; i++) { | |
927 | if (!(buf = g_try_malloc(devc->epin_maxpacketsize))) { | |
928 | sr_err("Failed to malloc USB endpoint buffer."); | |
929 | return SR_ERR_MALLOC; | |
930 | } | |
931 | transfer = libusb_alloc_transfer(0); | |
932 | libusb_fill_bulk_transfer(transfer, usb->devhdl, DSO_EP_IN, buf, | |
933 | devc->epin_maxpacketsize, cb, (void *)sdi, 40); | |
934 | if ((ret = libusb_submit_transfer(transfer)) != 0) { | |
935 | sr_err("Failed to submit transfer: %s.", | |
936 | libusb_error_name(ret)); | |
937 | /* TODO: Free them all. */ | |
938 | libusb_free_transfer(transfer); | |
939 | g_free(buf); | |
940 | return SR_ERR; | |
941 | } | |
942 | } | |
943 | ||
944 | return SR_OK; | |
945 | } |