]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
6 | * | |
7 | * This program is free software: you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation, either version 3 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
19 | */ | |
20 | ||
21 | #include "protocol.h" | |
22 | #include "dslogic.h" | |
23 | ||
24 | static const struct fx2lafw_profile supported_fx2[] = { | |
25 | /* | |
26 | * CWAV USBee AX | |
27 | * EE Electronics ESLA201A | |
28 | * ARMFLY AX-Pro | |
29 | */ | |
30 | { 0x08a9, 0x0014, "CWAV", "USBee AX", NULL, | |
31 | FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw", | |
32 | 0, NULL, NULL}, | |
33 | /* | |
34 | * CWAV USBee DX | |
35 | * XZL-Studio DX | |
36 | */ | |
37 | { 0x08a9, 0x0015, "CWAV", "USBee DX", NULL, | |
38 | FIRMWARE_DIR "/fx2lafw-cwav-usbeedx.fw", | |
39 | DEV_CAPS_16BIT, NULL, NULL }, | |
40 | ||
41 | /* | |
42 | * CWAV USBee SX | |
43 | */ | |
44 | { 0x08a9, 0x0009, "CWAV", "USBee SX", NULL, | |
45 | FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw", | |
46 | 0, NULL, NULL}, | |
47 | ||
48 | /* DreamSourceLab DSLogic (before FW upload) */ | |
49 | { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL, | |
50 | FIRMWARE_DIR "/dreamsourcelab-dslogic-fx2.fw", | |
51 | DEV_CAPS_16BIT, NULL, NULL}, | |
52 | /* DreamSourceLab DSLogic (after FW upload) */ | |
53 | { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL, | |
54 | FIRMWARE_DIR "/dreamsourcelab-dslogic-fx2.fw", | |
55 | DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"}, | |
56 | ||
57 | /* DreamSourceLab DSCope (before FW upload) */ | |
58 | { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL, | |
59 | FIRMWARE_DIR "/dreamsourcelab-dscope-fx2.fw", | |
60 | DEV_CAPS_16BIT, NULL, NULL}, | |
61 | /* DreamSourceLab DSCope (after FW upload) */ | |
62 | { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL, | |
63 | FIRMWARE_DIR "/dreamsourcelab-dscope-fx2.fw", | |
64 | DEV_CAPS_16BIT, "DreamSourceLab", "DSCope"}, | |
65 | ||
66 | /* DreamSourceLab DSLogic Pro (before FW upload) */ | |
67 | { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL, | |
68 | FIRMWARE_DIR "/dreamsourcelab-dslogic-pro-fx2.fw", | |
69 | DEV_CAPS_16BIT, NULL, NULL}, | |
70 | /* DreamSourceLab DSLogic Pro (after FW upload) */ | |
71 | { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL, | |
72 | FIRMWARE_DIR "/dreamsourcelab-dslogic-pro-fx2.fw", | |
73 | DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"}, | |
74 | ||
75 | /* | |
76 | * Saleae Logic | |
77 | * EE Electronics ESLA100 | |
78 | * Robomotic MiniLogic | |
79 | * Robomotic BugLogic 3 | |
80 | */ | |
81 | { 0x0925, 0x3881, "Saleae", "Logic", NULL, | |
82 | FIRMWARE_DIR "/fx2lafw-saleae-logic.fw", | |
83 | 0, NULL, NULL}, | |
84 | ||
85 | /* | |
86 | * Default Cypress FX2 without EEPROM, e.g.: | |
87 | * Lcsoft Mini Board | |
88 | * Braintechnology USB Interface V2.x | |
89 | */ | |
90 | { 0x04B4, 0x8613, "Cypress", "FX2", NULL, | |
91 | FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw", | |
92 | DEV_CAPS_16BIT, NULL, NULL }, | |
93 | ||
94 | /* | |
95 | * Braintechnology USB-LPS | |
96 | */ | |
97 | { 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL, | |
98 | FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw", | |
99 | DEV_CAPS_16BIT, NULL, NULL }, | |
100 | ||
101 | { 0, 0, 0, 0, 0, 0, 0, 0, 0 } | |
102 | }; | |
103 | ||
104 | static const uint32_t drvopts[] = { | |
105 | SR_CONF_LOGIC_ANALYZER, | |
106 | }; | |
107 | ||
108 | static const uint32_t scanopts[] = { | |
109 | SR_CONF_CONN, | |
110 | }; | |
111 | ||
112 | static const uint32_t devopts[] = { | |
113 | SR_CONF_CONTINUOUS | SR_CONF_SET, | |
114 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
115 | SR_CONF_CONN | SR_CONF_GET, | |
116 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
117 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
118 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
119 | }; | |
120 | ||
121 | static const char *channel_names[] = { | |
122 | "0", "1", "2", "3", "4", "5", "6", "7", | |
123 | "8", "9", "10", "11", "12", "13", "14", "15", | |
124 | }; | |
125 | ||
126 | static const int32_t soft_trigger_matches[] = { | |
127 | SR_TRIGGER_ZERO, | |
128 | SR_TRIGGER_ONE, | |
129 | SR_TRIGGER_RISING, | |
130 | SR_TRIGGER_FALLING, | |
131 | SR_TRIGGER_EDGE, | |
132 | }; | |
133 | ||
134 | static const uint64_t samplerates[] = { | |
135 | SR_KHZ(20), | |
136 | SR_KHZ(25), | |
137 | SR_KHZ(50), | |
138 | SR_KHZ(100), | |
139 | SR_KHZ(200), | |
140 | SR_KHZ(250), | |
141 | SR_KHZ(500), | |
142 | SR_MHZ(1), | |
143 | SR_MHZ(2), | |
144 | SR_MHZ(3), | |
145 | SR_MHZ(4), | |
146 | SR_MHZ(6), | |
147 | SR_MHZ(8), | |
148 | SR_MHZ(12), | |
149 | SR_MHZ(16), | |
150 | SR_MHZ(24), | |
151 | }; | |
152 | ||
153 | static const uint64_t dslogic_samplerates[] = { | |
154 | SR_KHZ(10), | |
155 | SR_KHZ(20), | |
156 | SR_KHZ(50), | |
157 | SR_KHZ(100), | |
158 | SR_KHZ(200), | |
159 | SR_KHZ(500), | |
160 | SR_MHZ(1), | |
161 | SR_MHZ(2), | |
162 | SR_MHZ(5), | |
163 | SR_MHZ(10), | |
164 | SR_MHZ(20), | |
165 | SR_MHZ(25), | |
166 | SR_MHZ(50), | |
167 | SR_MHZ(100), | |
168 | SR_MHZ(200), | |
169 | SR_MHZ(400), | |
170 | }; | |
171 | ||
172 | SR_PRIV struct sr_dev_driver fx2lafw_driver_info; | |
173 | ||
174 | static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx) | |
175 | { | |
176 | return std_init(sr_ctx, di, LOG_PREFIX); | |
177 | } | |
178 | ||
179 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
180 | { | |
181 | struct drv_context *drvc; | |
182 | struct dev_context *devc; | |
183 | struct sr_dev_inst *sdi; | |
184 | struct sr_usb_dev_inst *usb; | |
185 | struct sr_config *src; | |
186 | const struct fx2lafw_profile *prof; | |
187 | GSList *l, *devices, *conn_devices; | |
188 | gboolean has_firmware; | |
189 | struct libusb_device_descriptor des; | |
190 | libusb_device **devlist; | |
191 | struct libusb_device_handle *hdl; | |
192 | int num_logic_channels, ret, i, j; | |
193 | const char *conn; | |
194 | char manufacturer[64], product[64], serial_num[64], connection_id[64]; | |
195 | ||
196 | drvc = di->context; | |
197 | ||
198 | conn = NULL; | |
199 | for (l = options; l; l = l->next) { | |
200 | src = l->data; | |
201 | switch (src->key) { | |
202 | case SR_CONF_CONN: | |
203 | conn = g_variant_get_string(src->data, NULL); | |
204 | break; | |
205 | } | |
206 | } | |
207 | if (conn) | |
208 | conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn); | |
209 | else | |
210 | conn_devices = NULL; | |
211 | ||
212 | /* Find all fx2lafw compatible devices and upload firmware to them. */ | |
213 | devices = NULL; | |
214 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
215 | for (i = 0; devlist[i]; i++) { | |
216 | if (conn) { | |
217 | usb = NULL; | |
218 | for (l = conn_devices; l; l = l->next) { | |
219 | usb = l->data; | |
220 | if (usb->bus == libusb_get_bus_number(devlist[i]) | |
221 | && usb->address == libusb_get_device_address(devlist[i])) | |
222 | break; | |
223 | } | |
224 | if (!l) | |
225 | /* This device matched none of the ones that | |
226 | * matched the conn specification. */ | |
227 | continue; | |
228 | } | |
229 | ||
230 | if ((ret = libusb_get_device_descriptor( devlist[i], &des)) != 0) { | |
231 | sr_warn("Failed to get device descriptor: %s.", | |
232 | libusb_error_name(ret)); | |
233 | continue; | |
234 | } | |
235 | ||
236 | if ((ret = libusb_open(devlist[i], &hdl)) < 0) | |
237 | continue; | |
238 | ||
239 | if (des.iManufacturer == 0) { | |
240 | manufacturer[0] = '\0'; | |
241 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
242 | des.iManufacturer, (unsigned char *) manufacturer, | |
243 | sizeof(manufacturer))) < 0) { | |
244 | sr_warn("Failed to get manufacturer string descriptor: %s.", | |
245 | libusb_error_name(ret)); | |
246 | continue; | |
247 | } | |
248 | ||
249 | if (des.iProduct == 0) { | |
250 | product[0] = '\0'; | |
251 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
252 | des.iProduct, (unsigned char *) product, | |
253 | sizeof(product))) < 0) { | |
254 | sr_warn("Failed to get product string descriptor: %s.", | |
255 | libusb_error_name(ret)); | |
256 | continue; | |
257 | } | |
258 | ||
259 | if (des.iSerialNumber == 0) { | |
260 | serial_num[0] = '\0'; | |
261 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
262 | des.iSerialNumber, (unsigned char *) serial_num, | |
263 | sizeof(serial_num))) < 0) { | |
264 | sr_warn("Failed to get serial number string descriptor: %s.", | |
265 | libusb_error_name(ret)); | |
266 | continue; | |
267 | } | |
268 | ||
269 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
270 | ||
271 | libusb_close(hdl); | |
272 | ||
273 | prof = NULL; | |
274 | for (j = 0; supported_fx2[j].vid; j++) { | |
275 | if (des.idVendor == supported_fx2[j].vid && | |
276 | des.idProduct == supported_fx2[j].pid && | |
277 | (!supported_fx2[j].usb_manufacturer || | |
278 | !strcmp(manufacturer, supported_fx2[j].usb_manufacturer)) && | |
279 | (!supported_fx2[j].usb_manufacturer || | |
280 | !strcmp(product, supported_fx2[j].usb_product))) { | |
281 | prof = &supported_fx2[j]; | |
282 | break; | |
283 | } | |
284 | } | |
285 | ||
286 | /* Skip if the device was not found. */ | |
287 | if (!prof) | |
288 | continue; | |
289 | ||
290 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
291 | sdi->status = SR_ST_INITIALIZING; | |
292 | sdi->vendor = g_strdup(prof->vendor); | |
293 | sdi->model = g_strdup(prof->model); | |
294 | sdi->version = g_strdup(prof->model_version); | |
295 | sdi->driver = di; | |
296 | sdi->serial_num = g_strdup(serial_num); | |
297 | sdi->connection_id = g_strdup(connection_id); | |
298 | ||
299 | /* Fill in channellist according to this device's profile. */ | |
300 | num_logic_channels = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8; | |
301 | for (j = 0; j < num_logic_channels; j++) | |
302 | sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, TRUE, | |
303 | channel_names[j]); | |
304 | ||
305 | devc = fx2lafw_dev_new(); | |
306 | devc->profile = prof; | |
307 | devc->sample_wide = (prof->dev_caps & DEV_CAPS_16BIT) != 0; | |
308 | sdi->priv = devc; | |
309 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
310 | devices = g_slist_append(devices, sdi); | |
311 | ||
312 | if (!strcmp(prof->model, "DSLogic") | |
313 | || !strcmp(prof->model, "DSLogic Pro") | |
314 | || !strcmp(prof->model, "DSCope")) { | |
315 | devc->dslogic = TRUE; | |
316 | devc->samplerates = dslogic_samplerates; | |
317 | devc->num_samplerates = ARRAY_SIZE(dslogic_samplerates); | |
318 | has_firmware = match_manuf_prod(devlist[i], "DreamSourceLab", "DSLogic") | |
319 | || match_manuf_prod(devlist[i], "DreamSourceLab", "DSCope"); | |
320 | } else { | |
321 | devc->dslogic = FALSE; | |
322 | devc->samplerates = samplerates; | |
323 | devc->num_samplerates = ARRAY_SIZE(samplerates); | |
324 | has_firmware = match_manuf_prod(devlist[i], | |
325 | "sigrok", "fx2lafw"); | |
326 | } | |
327 | ||
328 | if (has_firmware) { | |
329 | /* Already has the firmware, so fix the new address. */ | |
330 | sr_dbg("Found an fx2lafw device."); | |
331 | sdi->status = SR_ST_INACTIVE; | |
332 | sdi->inst_type = SR_INST_USB; | |
333 | sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
334 | libusb_get_device_address(devlist[i]), NULL); | |
335 | } else { | |
336 | if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION, | |
337 | prof->firmware) == SR_OK) | |
338 | /* Store when this device's FW was updated. */ | |
339 | devc->fw_updated = g_get_monotonic_time(); | |
340 | else | |
341 | sr_err("Firmware upload failed for " | |
342 | "device %d.%d (logical).", | |
343 | libusb_get_bus_number(devlist[i]), | |
344 | libusb_get_device_address(devlist[i])); | |
345 | sdi->inst_type = SR_INST_USB; | |
346 | sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
347 | 0xff, NULL); | |
348 | } | |
349 | } | |
350 | libusb_free_device_list(devlist, 1); | |
351 | g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free); | |
352 | ||
353 | return devices; | |
354 | } | |
355 | ||
356 | static GSList *dev_list(const struct sr_dev_driver *di) | |
357 | { | |
358 | return ((struct drv_context *)(di->context))->instances; | |
359 | } | |
360 | ||
361 | static int dev_open(struct sr_dev_inst *sdi) | |
362 | { | |
363 | struct sr_dev_driver *di = sdi->driver; | |
364 | struct sr_usb_dev_inst *usb; | |
365 | struct dev_context *devc; | |
366 | char *fpga_firmware = NULL; | |
367 | int ret; | |
368 | int64_t timediff_us, timediff_ms; | |
369 | ||
370 | devc = sdi->priv; | |
371 | usb = sdi->conn; | |
372 | ||
373 | /* | |
374 | * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS | |
375 | * milliseconds for the FX2 to renumerate. | |
376 | */ | |
377 | ret = SR_ERR; | |
378 | if (devc->fw_updated > 0) { | |
379 | sr_info("Waiting for device to reset."); | |
380 | /* Takes >= 300ms for the FX2 to be gone from the USB bus. */ | |
381 | g_usleep(300 * 1000); | |
382 | timediff_ms = 0; | |
383 | while (timediff_ms < MAX_RENUM_DELAY_MS) { | |
384 | if ((ret = fx2lafw_dev_open(sdi, di)) == SR_OK) | |
385 | break; | |
386 | g_usleep(100 * 1000); | |
387 | ||
388 | timediff_us = g_get_monotonic_time() - devc->fw_updated; | |
389 | timediff_ms = timediff_us / 1000; | |
390 | sr_spew("Waited %" PRIi64 "ms.", timediff_ms); | |
391 | } | |
392 | if (ret != SR_OK) { | |
393 | sr_err("Device failed to renumerate."); | |
394 | return SR_ERR; | |
395 | } | |
396 | sr_info("Device came back after %" PRIi64 "ms.", timediff_ms); | |
397 | } else { | |
398 | sr_info("Firmware upload was not needed."); | |
399 | ret = fx2lafw_dev_open(sdi, di); | |
400 | } | |
401 | ||
402 | if (ret != SR_OK) { | |
403 | sr_err("Unable to open device."); | |
404 | return SR_ERR; | |
405 | } | |
406 | ||
407 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
408 | if (ret != 0) { | |
409 | switch (ret) { | |
410 | case LIBUSB_ERROR_BUSY: | |
411 | sr_err("Unable to claim USB interface. Another " | |
412 | "program or driver has already claimed it."); | |
413 | break; | |
414 | case LIBUSB_ERROR_NO_DEVICE: | |
415 | sr_err("Device has been disconnected."); | |
416 | break; | |
417 | default: | |
418 | sr_err("Unable to claim interface: %s.", | |
419 | libusb_error_name(ret)); | |
420 | break; | |
421 | } | |
422 | ||
423 | return SR_ERR; | |
424 | } | |
425 | ||
426 | if (devc->dslogic) { | |
427 | if (!strcmp(devc->profile->model, "DSLogic")) { | |
428 | fpga_firmware = DSLOGIC_FPGA_FIRMWARE; | |
429 | } else if (!strcmp(devc->profile->model, "DSLogic Pro")) { | |
430 | fpga_firmware = DSLOGIC_PRO_FPGA_FIRMWARE; | |
431 | } else if (!strcmp(devc->profile->model, "DSCope")) { | |
432 | fpga_firmware = DSCOPE_FPGA_FIRMWARE; | |
433 | } | |
434 | ||
435 | if ((ret = dslogic_fpga_firmware_upload(sdi, | |
436 | fpga_firmware)) != SR_OK) | |
437 | return ret; | |
438 | } | |
439 | ||
440 | if (devc->cur_samplerate == 0) { | |
441 | /* Samplerate hasn't been set; default to the slowest one. */ | |
442 | devc->cur_samplerate = devc->samplerates[0]; | |
443 | } | |
444 | ||
445 | return SR_OK; | |
446 | } | |
447 | ||
448 | static int dev_close(struct sr_dev_inst *sdi) | |
449 | { | |
450 | struct sr_usb_dev_inst *usb; | |
451 | ||
452 | usb = sdi->conn; | |
453 | if (!usb->devhdl) | |
454 | return SR_ERR; | |
455 | ||
456 | sr_info("fx2lafw: Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
457 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
458 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
459 | libusb_close(usb->devhdl); | |
460 | usb->devhdl = NULL; | |
461 | sdi->status = SR_ST_INACTIVE; | |
462 | ||
463 | return SR_OK; | |
464 | } | |
465 | ||
466 | static int cleanup(const struct sr_dev_driver *di) | |
467 | { | |
468 | int ret; | |
469 | struct drv_context *drvc; | |
470 | ||
471 | if (!(drvc = di->context)) | |
472 | return SR_OK; | |
473 | ||
474 | ret = std_dev_clear(di, NULL); | |
475 | ||
476 | g_free(drvc); | |
477 | ||
478 | return ret; | |
479 | } | |
480 | ||
481 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
482 | const struct sr_channel_group *cg) | |
483 | { | |
484 | struct dev_context *devc; | |
485 | struct sr_usb_dev_inst *usb; | |
486 | char str[128]; | |
487 | ||
488 | (void)cg; | |
489 | ||
490 | if (!sdi) | |
491 | return SR_ERR_ARG; | |
492 | ||
493 | devc = sdi->priv; | |
494 | ||
495 | switch (key) { | |
496 | case SR_CONF_CONN: | |
497 | if (!sdi->conn) | |
498 | return SR_ERR_ARG; | |
499 | usb = sdi->conn; | |
500 | if (usb->address == 255) | |
501 | /* Device still needs to re-enumerate after firmware | |
502 | * upload, so we don't know its (future) address. */ | |
503 | return SR_ERR; | |
504 | snprintf(str, 128, "%d.%d", usb->bus, usb->address); | |
505 | *data = g_variant_new_string(str); | |
506 | break; | |
507 | case SR_CONF_LIMIT_SAMPLES: | |
508 | *data = g_variant_new_uint64(devc->limit_samples); | |
509 | break; | |
510 | case SR_CONF_SAMPLERATE: | |
511 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
512 | break; | |
513 | case SR_CONF_CAPTURE_RATIO: | |
514 | *data = g_variant_new_uint64(devc->capture_ratio); | |
515 | break; | |
516 | default: | |
517 | return SR_ERR_NA; | |
518 | } | |
519 | ||
520 | return SR_OK; | |
521 | } | |
522 | ||
523 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, | |
524 | const struct sr_channel_group *cg) | |
525 | { | |
526 | struct dev_context *devc; | |
527 | uint64_t arg; | |
528 | int i, ret; | |
529 | ||
530 | (void)cg; | |
531 | ||
532 | if (!sdi) | |
533 | return SR_ERR_ARG; | |
534 | ||
535 | if (sdi->status != SR_ST_ACTIVE) | |
536 | return SR_ERR; | |
537 | ||
538 | devc = sdi->priv; | |
539 | ||
540 | ret = SR_OK; | |
541 | ||
542 | switch (key) { | |
543 | case SR_CONF_SAMPLERATE: | |
544 | arg = g_variant_get_uint64(data); | |
545 | for (i = 0; i < devc->num_samplerates; i++) { | |
546 | if (devc->samplerates[i] == arg) { | |
547 | devc->cur_samplerate = arg; | |
548 | break; | |
549 | } | |
550 | } | |
551 | if (i == devc->num_samplerates) | |
552 | ret = SR_ERR_ARG; | |
553 | break; | |
554 | case SR_CONF_LIMIT_SAMPLES: | |
555 | devc->limit_samples = g_variant_get_uint64(data); | |
556 | break; | |
557 | case SR_CONF_CAPTURE_RATIO: | |
558 | devc->capture_ratio = g_variant_get_uint64(data); | |
559 | if (devc->capture_ratio > 100) { | |
560 | devc->capture_ratio = 0; | |
561 | ret = SR_ERR; | |
562 | } else | |
563 | ret = SR_OK; | |
564 | break; | |
565 | default: | |
566 | ret = SR_ERR_NA; | |
567 | } | |
568 | ||
569 | return ret; | |
570 | } | |
571 | ||
572 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
573 | const struct sr_channel_group *cg) | |
574 | { | |
575 | struct dev_context *devc; | |
576 | GVariant *gvar; | |
577 | GVariantBuilder gvb; | |
578 | ||
579 | (void)cg; | |
580 | ||
581 | switch (key) { | |
582 | case SR_CONF_SCAN_OPTIONS: | |
583 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
584 | scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t)); | |
585 | break; | |
586 | case SR_CONF_DEVICE_OPTIONS: | |
587 | if (!sdi) | |
588 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
589 | drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); | |
590 | else | |
591 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
592 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); | |
593 | break; | |
594 | case SR_CONF_SAMPLERATE: | |
595 | if (!sdi->priv) | |
596 | return SR_ERR_ARG; | |
597 | devc = sdi->priv; | |
598 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
599 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), devc->samplerates, | |
600 | devc->num_samplerates, sizeof(uint64_t)); | |
601 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
602 | *data = g_variant_builder_end(&gvb); | |
603 | break; | |
604 | case SR_CONF_TRIGGER_MATCH: | |
605 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
606 | soft_trigger_matches, ARRAY_SIZE(soft_trigger_matches), | |
607 | sizeof(int32_t)); | |
608 | break; | |
609 | default: | |
610 | return SR_ERR_NA; | |
611 | } | |
612 | ||
613 | return SR_OK; | |
614 | } | |
615 | ||
616 | static int receive_data(int fd, int revents, void *cb_data) | |
617 | { | |
618 | struct timeval tv; | |
619 | struct drv_context *drvc; | |
620 | ||
621 | (void)fd; | |
622 | (void)revents; | |
623 | ||
624 | drvc = (struct drv_context *)cb_data; | |
625 | ||
626 | tv.tv_sec = tv.tv_usec = 0; | |
627 | libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv); | |
628 | ||
629 | return TRUE; | |
630 | } | |
631 | ||
632 | static int start_transfers(const struct sr_dev_inst *sdi) | |
633 | { | |
634 | struct dev_context *devc; | |
635 | struct sr_usb_dev_inst *usb; | |
636 | struct sr_trigger *trigger; | |
637 | struct libusb_transfer *transfer; | |
638 | unsigned int i, num_transfers; | |
639 | int endpoint, timeout, ret; | |
640 | unsigned char *buf; | |
641 | size_t size; | |
642 | ||
643 | devc = sdi->priv; | |
644 | usb = sdi->conn; | |
645 | ||
646 | devc->sent_samples = 0; | |
647 | devc->acq_aborted = FALSE; | |
648 | devc->empty_transfer_count = 0; | |
649 | ||
650 | if ((trigger = sr_session_trigger_get(sdi->session))) { | |
651 | int pre_trigger_samples = 0; | |
652 | if (devc->limit_samples > 0) | |
653 | pre_trigger_samples = devc->capture_ratio * devc->limit_samples/100; | |
654 | devc->stl = soft_trigger_logic_new(sdi, trigger, pre_trigger_samples); | |
655 | if (!devc->stl) | |
656 | return SR_ERR_MALLOC; | |
657 | devc->trigger_fired = FALSE; | |
658 | } else | |
659 | devc->trigger_fired = TRUE; | |
660 | ||
661 | timeout = fx2lafw_get_timeout(devc); | |
662 | ||
663 | num_transfers = fx2lafw_get_number_of_transfers(devc); | |
664 | size = fx2lafw_get_buffer_size(devc); | |
665 | devc->submitted_transfers = 0; | |
666 | ||
667 | devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers); | |
668 | if (!devc->transfers) { | |
669 | sr_err("USB transfers malloc failed."); | |
670 | return SR_ERR_MALLOC; | |
671 | } | |
672 | ||
673 | timeout = fx2lafw_get_timeout(devc); | |
674 | endpoint = devc->dslogic ? 6 : 2; | |
675 | devc->num_transfers = num_transfers; | |
676 | for (i = 0; i < num_transfers; i++) { | |
677 | if (!(buf = g_try_malloc(size))) { | |
678 | sr_err("USB transfer buffer malloc failed."); | |
679 | return SR_ERR_MALLOC; | |
680 | } | |
681 | transfer = libusb_alloc_transfer(0); | |
682 | libusb_fill_bulk_transfer(transfer, usb->devhdl, | |
683 | endpoint | LIBUSB_ENDPOINT_IN, buf, size, | |
684 | fx2lafw_receive_transfer, (void *)sdi, timeout); | |
685 | if ((ret = libusb_submit_transfer(transfer)) != 0) { | |
686 | sr_err("Failed to submit transfer: %s.", | |
687 | libusb_error_name(ret)); | |
688 | libusb_free_transfer(transfer); | |
689 | g_free(buf); | |
690 | fx2lafw_abort_acquisition(devc); | |
691 | return SR_ERR; | |
692 | } | |
693 | devc->transfers[i] = transfer; | |
694 | devc->submitted_transfers++; | |
695 | } | |
696 | ||
697 | /* Send header packet to the session bus. */ | |
698 | std_session_send_df_header(sdi, LOG_PREFIX); | |
699 | ||
700 | return SR_OK; | |
701 | } | |
702 | ||
703 | static void LIBUSB_CALL dslogic_trigger_receive(struct libusb_transfer *transfer) | |
704 | { | |
705 | const struct sr_dev_inst *sdi; | |
706 | struct dslogic_trigger_pos *tpos; | |
707 | ||
708 | sdi = transfer->user_data; | |
709 | ||
710 | if (transfer->status == LIBUSB_TRANSFER_COMPLETED | |
711 | && transfer->actual_length == sizeof(struct dslogic_trigger_pos)) { | |
712 | tpos = (struct dslogic_trigger_pos *)transfer->buffer; | |
713 | sr_dbg("tpos real_pos %.8x ram_saddr %.8x", tpos->real_pos, tpos->ram_saddr); | |
714 | g_free(tpos); | |
715 | start_transfers(sdi); | |
716 | } | |
717 | ||
718 | libusb_free_transfer(transfer); | |
719 | ||
720 | } | |
721 | ||
722 | static int dslogic_trigger_request(const struct sr_dev_inst *sdi) | |
723 | { | |
724 | struct sr_usb_dev_inst *usb; | |
725 | struct libusb_transfer *transfer; | |
726 | struct dslogic_trigger_pos *tpos; | |
727 | int ret; | |
728 | ||
729 | usb = sdi->conn; | |
730 | ||
731 | if ((ret = dslogic_stop_acquisition(sdi)) != SR_OK) | |
732 | return ret; | |
733 | ||
734 | if ((ret = dslogic_fpga_configure(sdi)) != SR_OK) | |
735 | return ret; | |
736 | ||
737 | if ((ret = dslogic_start_acquisition(sdi)) != SR_OK) | |
738 | return ret; | |
739 | ||
740 | sr_dbg("Getting trigger."); | |
741 | tpos = g_malloc(sizeof(struct dslogic_trigger_pos)); | |
742 | transfer = libusb_alloc_transfer(0); | |
743 | libusb_fill_bulk_transfer(transfer, usb->devhdl, 6 | LIBUSB_ENDPOINT_IN, | |
744 | (unsigned char *)tpos, sizeof(struct dslogic_trigger_pos), | |
745 | dslogic_trigger_receive, (void *)sdi, 0); | |
746 | if ((ret = libusb_submit_transfer(transfer)) < 0) { | |
747 | sr_err("Failed to request trigger: %s.", libusb_error_name(ret)); | |
748 | libusb_free_transfer(transfer); | |
749 | g_free(tpos); | |
750 | return SR_ERR; | |
751 | } | |
752 | ||
753 | return ret; | |
754 | } | |
755 | ||
756 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data) | |
757 | { | |
758 | struct sr_dev_driver *di; | |
759 | struct drv_context *drvc; | |
760 | struct dev_context *devc; | |
761 | int timeout, ret; | |
762 | ||
763 | if (sdi->status != SR_ST_ACTIVE) | |
764 | return SR_ERR_DEV_CLOSED; | |
765 | ||
766 | di = sdi->driver; | |
767 | drvc = di->context; | |
768 | devc = sdi->priv; | |
769 | ||
770 | devc->ctx = drvc->sr_ctx; | |
771 | devc->cb_data = cb_data; | |
772 | devc->sent_samples = 0; | |
773 | devc->empty_transfer_count = 0; | |
774 | devc->acq_aborted = FALSE; | |
775 | ||
776 | timeout = fx2lafw_get_timeout(devc); | |
777 | usb_source_add(sdi->session, devc->ctx, timeout, receive_data, drvc); | |
778 | ||
779 | if (devc->dslogic) { | |
780 | dslogic_trigger_request(sdi); | |
781 | } | |
782 | else { | |
783 | start_transfers(sdi); | |
784 | if ((ret = fx2lafw_command_start_acquisition(sdi)) != SR_OK) { | |
785 | fx2lafw_abort_acquisition(devc); | |
786 | return ret; | |
787 | } | |
788 | } | |
789 | ||
790 | return SR_OK; | |
791 | } | |
792 | ||
793 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
794 | { | |
795 | (void)cb_data; | |
796 | ||
797 | fx2lafw_abort_acquisition(sdi->priv); | |
798 | ||
799 | return SR_OK; | |
800 | } | |
801 | ||
802 | SR_PRIV struct sr_dev_driver fx2lafw_driver_info = { | |
803 | .name = "fx2lafw", | |
804 | .longname = "fx2lafw (generic driver for FX2 based LAs)", | |
805 | .api_version = 1, | |
806 | .init = init, | |
807 | .cleanup = cleanup, | |
808 | .scan = scan, | |
809 | .dev_list = dev_list, | |
810 | .dev_clear = NULL, | |
811 | .config_get = config_get, | |
812 | .config_set = config_set, | |
813 | .config_list = config_list, | |
814 | .dev_open = dev_open, | |
815 | .dev_close = dev_close, | |
816 | .dev_acquisition_start = dev_acquisition_start, | |
817 | .dev_acquisition_stop = dev_acquisition_stop, | |
818 | .context = NULL, | |
819 | }; |