]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
6 | * | |
7 | * This program is free software: you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation, either version 3 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
19 | */ | |
20 | ||
21 | #include <stdio.h> | |
22 | #include <stdlib.h> | |
23 | #include <string.h> | |
24 | #include <inttypes.h> | |
25 | #include <libusb.h> | |
26 | #include "libsigrok.h" | |
27 | #include "libsigrok-internal.h" | |
28 | #include "fx2lafw.h" | |
29 | #include "command.h" | |
30 | ||
31 | static const struct fx2lafw_profile supported_fx2[] = { | |
32 | /* | |
33 | * CWAV USBee AX | |
34 | * EE Electronics ESLA201A | |
35 | * ARMFLY AX-Pro | |
36 | */ | |
37 | { 0x08a9, 0x0014, "CWAV", "USBee AX", NULL, | |
38 | FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw", | |
39 | 0 }, | |
40 | /* | |
41 | * CWAV USBee DX | |
42 | * XZL-Studio DX | |
43 | */ | |
44 | { 0x08a9, 0x0015, "CWAV", "USBee DX", NULL, | |
45 | FIRMWARE_DIR "/fx2lafw-cwav-usbeedx.fw", | |
46 | DEV_CAPS_16BIT }, | |
47 | ||
48 | /* | |
49 | * CWAV USBee SX | |
50 | */ | |
51 | { 0x08a9, 0x0009, "CWAV", "USBee SX", NULL, | |
52 | FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw", | |
53 | 0 }, | |
54 | ||
55 | /* | |
56 | * Saleae Logic | |
57 | * EE Electronics ESLA100 | |
58 | * Robomotic MiniLogic | |
59 | * Robomotic BugLogic 3 | |
60 | */ | |
61 | { 0x0925, 0x3881, "Saleae", "Logic", NULL, | |
62 | FIRMWARE_DIR "/fx2lafw-saleae-logic.fw", | |
63 | 0 }, | |
64 | ||
65 | /* | |
66 | * Default Cypress FX2 without EEPROM, e.g.: | |
67 | * Lcsoft Mini Board | |
68 | * Braintechnology USB Interface V2.x | |
69 | */ | |
70 | { 0x04B4, 0x8613, "Cypress", "FX2", NULL, | |
71 | FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw", | |
72 | DEV_CAPS_16BIT }, | |
73 | ||
74 | /* | |
75 | * Braintechnology USB-LPS | |
76 | */ | |
77 | { 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL, | |
78 | FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw", | |
79 | DEV_CAPS_16BIT }, | |
80 | ||
81 | { 0, 0, 0, 0, 0, 0, 0 } | |
82 | }; | |
83 | ||
84 | static const int32_t hwopts[] = { | |
85 | SR_CONF_CONN, | |
86 | }; | |
87 | ||
88 | static const int32_t hwcaps[] = { | |
89 | SR_CONF_LOGIC_ANALYZER, | |
90 | SR_CONF_TRIGGER_TYPE, | |
91 | SR_CONF_SAMPLERATE, | |
92 | ||
93 | /* These are really implemented in the driver, not the hardware. */ | |
94 | SR_CONF_LIMIT_SAMPLES, | |
95 | SR_CONF_CONTINUOUS, | |
96 | }; | |
97 | ||
98 | static const char *probe_names[] = { | |
99 | "0", "1", "2", "3", "4", "5", "6", "7", | |
100 | "8", "9", "10", "11", "12", "13", "14", "15", | |
101 | NULL, | |
102 | }; | |
103 | ||
104 | static const uint64_t samplerates[] = { | |
105 | SR_KHZ(20), | |
106 | SR_KHZ(25), | |
107 | SR_KHZ(50), | |
108 | SR_KHZ(100), | |
109 | SR_KHZ(200), | |
110 | SR_KHZ(250), | |
111 | SR_KHZ(500), | |
112 | SR_MHZ(1), | |
113 | SR_MHZ(2), | |
114 | SR_MHZ(3), | |
115 | SR_MHZ(4), | |
116 | SR_MHZ(6), | |
117 | SR_MHZ(8), | |
118 | SR_MHZ(12), | |
119 | SR_MHZ(16), | |
120 | SR_MHZ(24), | |
121 | }; | |
122 | ||
123 | SR_PRIV struct sr_dev_driver fx2lafw_driver_info; | |
124 | static struct sr_dev_driver *di = &fx2lafw_driver_info; | |
125 | static int hw_dev_close(struct sr_dev_inst *sdi); | |
126 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data); | |
127 | ||
128 | /** | |
129 | * Check the USB configuration to determine if this is an fx2lafw device. | |
130 | * | |
131 | * @return TRUE if the device's configuration profile match fx2lafw | |
132 | * configuration, FALSE otherwise. | |
133 | */ | |
134 | static gboolean check_conf_profile(libusb_device *dev) | |
135 | { | |
136 | struct libusb_device_descriptor des; | |
137 | struct libusb_device_handle *hdl; | |
138 | gboolean ret; | |
139 | unsigned char strdesc[64]; | |
140 | ||
141 | hdl = NULL; | |
142 | ret = FALSE; | |
143 | while (!ret) { | |
144 | /* Assume the FW has not been loaded, unless proven wrong. */ | |
145 | if (libusb_get_device_descriptor(dev, &des) != 0) | |
146 | break; | |
147 | ||
148 | if (libusb_open(dev, &hdl) != 0) | |
149 | break; | |
150 | ||
151 | if (libusb_get_string_descriptor_ascii(hdl, | |
152 | des.iManufacturer, strdesc, sizeof(strdesc)) < 0) | |
153 | break; | |
154 | if (strncmp((const char *)strdesc, "sigrok", 6)) | |
155 | break; | |
156 | ||
157 | if (libusb_get_string_descriptor_ascii(hdl, | |
158 | des.iProduct, strdesc, sizeof(strdesc)) < 0) | |
159 | break; | |
160 | if (strncmp((const char *)strdesc, "fx2lafw", 7)) | |
161 | break; | |
162 | ||
163 | /* If we made it here, it must be an fx2lafw. */ | |
164 | ret = TRUE; | |
165 | } | |
166 | if (hdl) | |
167 | libusb_close(hdl); | |
168 | ||
169 | return ret; | |
170 | } | |
171 | ||
172 | static int fx2lafw_dev_open(struct sr_dev_inst *sdi) | |
173 | { | |
174 | libusb_device **devlist; | |
175 | struct sr_usb_dev_inst *usb; | |
176 | struct libusb_device_descriptor des; | |
177 | struct dev_context *devc; | |
178 | struct drv_context *drvc; | |
179 | struct version_info vi; | |
180 | int ret, skip, i, device_count; | |
181 | uint8_t revid; | |
182 | ||
183 | drvc = di->priv; | |
184 | devc = sdi->priv; | |
185 | usb = sdi->conn; | |
186 | ||
187 | if (sdi->status == SR_ST_ACTIVE) | |
188 | /* Device is already in use. */ | |
189 | return SR_ERR; | |
190 | ||
191 | skip = 0; | |
192 | device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
193 | if (device_count < 0) { | |
194 | sr_err("Failed to get device list: %s.", | |
195 | libusb_error_name(device_count)); | |
196 | return SR_ERR; | |
197 | } | |
198 | ||
199 | for (i = 0; i < device_count; i++) { | |
200 | if ((ret = libusb_get_device_descriptor(devlist[i], &des))) { | |
201 | sr_err("Failed to get device descriptor: %s.", | |
202 | libusb_error_name(ret)); | |
203 | continue; | |
204 | } | |
205 | ||
206 | if (des.idVendor != devc->profile->vid | |
207 | || des.idProduct != devc->profile->pid) | |
208 | continue; | |
209 | ||
210 | if (sdi->status == SR_ST_INITIALIZING) { | |
211 | if (skip != sdi->index) { | |
212 | /* Skip devices of this type that aren't the one we want. */ | |
213 | skip += 1; | |
214 | continue; | |
215 | } | |
216 | } else if (sdi->status == SR_ST_INACTIVE) { | |
217 | /* | |
218 | * This device is fully enumerated, so we need to find | |
219 | * this device by vendor, product, bus and address. | |
220 | */ | |
221 | if (libusb_get_bus_number(devlist[i]) != usb->bus | |
222 | || libusb_get_device_address(devlist[i]) != usb->address) | |
223 | /* This is not the one. */ | |
224 | continue; | |
225 | } | |
226 | ||
227 | if (!(ret = libusb_open(devlist[i], &usb->devhdl))) { | |
228 | if (usb->address == 0xff) | |
229 | /* | |
230 | * First time we touch this device after FW | |
231 | * upload, so we don't know the address yet. | |
232 | */ | |
233 | usb->address = libusb_get_device_address(devlist[i]); | |
234 | } else { | |
235 | sr_err("Failed to open device: %s.", | |
236 | libusb_error_name(ret)); | |
237 | break; | |
238 | } | |
239 | ||
240 | ret = command_get_fw_version(usb->devhdl, &vi); | |
241 | if (ret != SR_OK) { | |
242 | sr_err("Failed to get firmware version."); | |
243 | break; | |
244 | } | |
245 | ||
246 | ret = command_get_revid_version(usb->devhdl, &revid); | |
247 | if (ret != SR_OK) { | |
248 | sr_err("Failed to get REVID."); | |
249 | break; | |
250 | } | |
251 | ||
252 | /* | |
253 | * Changes in major version mean incompatible/API changes, so | |
254 | * bail out if we encounter an incompatible version. | |
255 | * Different minor versions are OK, they should be compatible. | |
256 | */ | |
257 | if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) { | |
258 | sr_err("Expected firmware version %d.x, " | |
259 | "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR, | |
260 | vi.major, vi.minor); | |
261 | break; | |
262 | } | |
263 | ||
264 | sdi->status = SR_ST_ACTIVE; | |
265 | sr_info("Opened device %d on %d.%d, " | |
266 | "interface %d, firmware %d.%d.", | |
267 | sdi->index, usb->bus, usb->address, | |
268 | USB_INTERFACE, vi.major, vi.minor); | |
269 | ||
270 | sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.", | |
271 | revid, (revid != 1) ? " (FX2)" : "A (FX2LP)"); | |
272 | ||
273 | break; | |
274 | } | |
275 | libusb_free_device_list(devlist, 1); | |
276 | ||
277 | if (sdi->status != SR_ST_ACTIVE) | |
278 | return SR_ERR; | |
279 | ||
280 | return SR_OK; | |
281 | } | |
282 | ||
283 | static int configure_probes(const struct sr_dev_inst *sdi) | |
284 | { | |
285 | struct dev_context *devc; | |
286 | struct sr_probe *probe; | |
287 | GSList *l; | |
288 | int probe_bit, stage, i; | |
289 | char *tc; | |
290 | ||
291 | devc = sdi->priv; | |
292 | for (i = 0; i < NUM_TRIGGER_STAGES; i++) { | |
293 | devc->trigger_mask[i] = 0; | |
294 | devc->trigger_value[i] = 0; | |
295 | } | |
296 | ||
297 | stage = -1; | |
298 | for (l = sdi->probes; l; l = l->next) { | |
299 | probe = (struct sr_probe *)l->data; | |
300 | if (probe->enabled == FALSE) | |
301 | continue; | |
302 | ||
303 | if (probe->index > 7) | |
304 | devc->sample_wide = TRUE; | |
305 | ||
306 | probe_bit = 1 << (probe->index); | |
307 | if (!(probe->trigger)) | |
308 | continue; | |
309 | ||
310 | stage = 0; | |
311 | for (tc = probe->trigger; *tc; tc++) { | |
312 | devc->trigger_mask[stage] |= probe_bit; | |
313 | if (*tc == '1') | |
314 | devc->trigger_value[stage] |= probe_bit; | |
315 | stage++; | |
316 | if (stage > NUM_TRIGGER_STAGES) | |
317 | return SR_ERR; | |
318 | } | |
319 | } | |
320 | ||
321 | if (stage == -1) | |
322 | /* | |
323 | * We didn't configure any triggers, make sure acquisition | |
324 | * doesn't wait for any. | |
325 | */ | |
326 | devc->trigger_stage = TRIGGER_FIRED; | |
327 | else | |
328 | devc->trigger_stage = 0; | |
329 | ||
330 | return SR_OK; | |
331 | } | |
332 | ||
333 | static struct dev_context *fx2lafw_dev_new(void) | |
334 | { | |
335 | struct dev_context *devc; | |
336 | ||
337 | if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) { | |
338 | sr_err("Device context malloc failed."); | |
339 | return NULL; | |
340 | } | |
341 | ||
342 | devc->trigger_stage = TRIGGER_FIRED; | |
343 | ||
344 | return devc; | |
345 | } | |
346 | ||
347 | static int clear_instances(void) | |
348 | { | |
349 | return std_dev_clear(di, NULL); | |
350 | } | |
351 | ||
352 | static int hw_init(struct sr_context *sr_ctx) | |
353 | { | |
354 | return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN); | |
355 | } | |
356 | ||
357 | static GSList *hw_scan(GSList *options) | |
358 | { | |
359 | struct drv_context *drvc; | |
360 | struct dev_context *devc; | |
361 | struct sr_dev_inst *sdi; | |
362 | struct sr_usb_dev_inst *usb; | |
363 | struct sr_probe *probe; | |
364 | struct sr_config *src; | |
365 | const struct fx2lafw_profile *prof; | |
366 | GSList *l, *devices, *conn_devices; | |
367 | struct libusb_device_descriptor des; | |
368 | libusb_device **devlist; | |
369 | int devcnt, num_logic_probes, ret, i, j; | |
370 | const char *conn; | |
371 | ||
372 | drvc = di->priv; | |
373 | ||
374 | /* This scan always invalidates any previous scans. */ | |
375 | clear_instances(); | |
376 | ||
377 | conn = NULL; | |
378 | for (l = options; l; l = l->next) { | |
379 | src = l->data; | |
380 | switch (src->key) { | |
381 | case SR_CONF_CONN: | |
382 | conn = g_variant_get_string(src->data, NULL); | |
383 | break; | |
384 | } | |
385 | } | |
386 | if (conn) | |
387 | conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn); | |
388 | else | |
389 | conn_devices = NULL; | |
390 | ||
391 | /* Find all fx2lafw compatible devices and upload firmware to them. */ | |
392 | devices = NULL; | |
393 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
394 | for (i = 0; devlist[i]; i++) { | |
395 | if (conn) { | |
396 | usb = NULL; | |
397 | for (l = conn_devices; l; l = l->next) { | |
398 | usb = l->data; | |
399 | if (usb->bus == libusb_get_bus_number(devlist[i]) | |
400 | && usb->address == libusb_get_device_address(devlist[i])) | |
401 | break; | |
402 | } | |
403 | if (!l) | |
404 | /* This device matched none of the ones that | |
405 | * matched the conn specification. */ | |
406 | continue; | |
407 | } | |
408 | ||
409 | if ((ret = libusb_get_device_descriptor( devlist[i], &des)) != 0) { | |
410 | sr_warn("Failed to get device descriptor: %s.", | |
411 | libusb_error_name(ret)); | |
412 | continue; | |
413 | } | |
414 | ||
415 | prof = NULL; | |
416 | for (j = 0; supported_fx2[j].vid; j++) { | |
417 | if (des.idVendor == supported_fx2[j].vid && | |
418 | des.idProduct == supported_fx2[j].pid) { | |
419 | prof = &supported_fx2[j]; | |
420 | } | |
421 | } | |
422 | ||
423 | /* Skip if the device was not found. */ | |
424 | if (!prof) | |
425 | continue; | |
426 | ||
427 | devcnt = g_slist_length(drvc->instances); | |
428 | sdi = sr_dev_inst_new(devcnt, SR_ST_INITIALIZING, | |
429 | prof->vendor, prof->model, prof->model_version); | |
430 | if (!sdi) | |
431 | return NULL; | |
432 | sdi->driver = di; | |
433 | ||
434 | /* Fill in probelist according to this device's profile. */ | |
435 | num_logic_probes = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8; | |
436 | for (j = 0; j < num_logic_probes; j++) { | |
437 | if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE, | |
438 | probe_names[j]))) | |
439 | return NULL; | |
440 | sdi->probes = g_slist_append(sdi->probes, probe); | |
441 | } | |
442 | ||
443 | devc = fx2lafw_dev_new(); | |
444 | devc->profile = prof; | |
445 | sdi->priv = devc; | |
446 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
447 | devices = g_slist_append(devices, sdi); | |
448 | ||
449 | if (check_conf_profile(devlist[i])) { | |
450 | /* Already has the firmware, so fix the new address. */ | |
451 | sr_dbg("Found an fx2lafw device."); | |
452 | sdi->status = SR_ST_INACTIVE; | |
453 | sdi->inst_type = SR_INST_USB; | |
454 | sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
455 | libusb_get_device_address(devlist[i]), NULL); | |
456 | } else { | |
457 | if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION, | |
458 | prof->firmware) == SR_OK) | |
459 | /* Store when this device's FW was updated. */ | |
460 | devc->fw_updated = g_get_monotonic_time(); | |
461 | else | |
462 | sr_err("Firmware upload failed for " | |
463 | "device %d.", devcnt); | |
464 | sdi->inst_type = SR_INST_USB; | |
465 | sdi->conn = sr_usb_dev_inst_new (libusb_get_bus_number(devlist[i]), | |
466 | 0xff, NULL); | |
467 | } | |
468 | } | |
469 | libusb_free_device_list(devlist, 1); | |
470 | ||
471 | return devices; | |
472 | } | |
473 | ||
474 | static GSList *hw_dev_list(void) | |
475 | { | |
476 | return ((struct drv_context *)(di->priv))->instances; | |
477 | } | |
478 | ||
479 | static int hw_dev_open(struct sr_dev_inst *sdi) | |
480 | { | |
481 | struct sr_usb_dev_inst *usb; | |
482 | struct dev_context *devc; | |
483 | int ret; | |
484 | int64_t timediff_us, timediff_ms; | |
485 | ||
486 | devc = sdi->priv; | |
487 | usb = sdi->conn; | |
488 | ||
489 | /* | |
490 | * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS | |
491 | * milliseconds for the FX2 to renumerate. | |
492 | */ | |
493 | ret = SR_ERR; | |
494 | if (devc->fw_updated > 0) { | |
495 | sr_info("Waiting for device to reset."); | |
496 | /* Takes >= 300ms for the FX2 to be gone from the USB bus. */ | |
497 | g_usleep(300 * 1000); | |
498 | timediff_ms = 0; | |
499 | while (timediff_ms < MAX_RENUM_DELAY_MS) { | |
500 | if ((ret = fx2lafw_dev_open(sdi)) == SR_OK) | |
501 | break; | |
502 | g_usleep(100 * 1000); | |
503 | ||
504 | timediff_us = g_get_monotonic_time() - devc->fw_updated; | |
505 | timediff_ms = timediff_us / 1000; | |
506 | sr_spew("Waited %" PRIi64 "ms.", timediff_ms); | |
507 | } | |
508 | if (ret != SR_OK) { | |
509 | sr_err("Device failed to renumerate."); | |
510 | return SR_ERR; | |
511 | } | |
512 | sr_info("Device came back after %" PRIi64 "ms.", timediff_ms); | |
513 | } else { | |
514 | sr_info("Firmware upload was not needed."); | |
515 | ret = fx2lafw_dev_open(sdi); | |
516 | } | |
517 | ||
518 | if (ret != SR_OK) { | |
519 | sr_err("Unable to open device."); | |
520 | return SR_ERR; | |
521 | } | |
522 | ||
523 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
524 | if (ret != 0) { | |
525 | switch(ret) { | |
526 | case LIBUSB_ERROR_BUSY: | |
527 | sr_err("Unable to claim USB interface. Another " | |
528 | "program or driver has already claimed it."); | |
529 | break; | |
530 | case LIBUSB_ERROR_NO_DEVICE: | |
531 | sr_err("Device has been disconnected."); | |
532 | break; | |
533 | default: | |
534 | sr_err("Unable to claim interface: %s.", | |
535 | libusb_error_name(ret)); | |
536 | break; | |
537 | } | |
538 | ||
539 | return SR_ERR; | |
540 | } | |
541 | ||
542 | if (devc->cur_samplerate == 0) { | |
543 | /* Samplerate hasn't been set; default to the slowest one. */ | |
544 | devc->cur_samplerate = samplerates[0]; | |
545 | } | |
546 | ||
547 | return SR_OK; | |
548 | } | |
549 | ||
550 | static int hw_dev_close(struct sr_dev_inst *sdi) | |
551 | { | |
552 | struct sr_usb_dev_inst *usb; | |
553 | ||
554 | usb = sdi->conn; | |
555 | if (usb->devhdl == NULL) | |
556 | return SR_ERR; | |
557 | ||
558 | sr_info("fx2lafw: Closing device %d on %d.%d interface %d.", | |
559 | sdi->index, usb->bus, usb->address, USB_INTERFACE); | |
560 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
561 | libusb_close(usb->devhdl); | |
562 | usb->devhdl = NULL; | |
563 | sdi->status = SR_ST_INACTIVE; | |
564 | ||
565 | return SR_OK; | |
566 | } | |
567 | ||
568 | static int hw_cleanup(void) | |
569 | { | |
570 | struct drv_context *drvc; | |
571 | int ret; | |
572 | ||
573 | if (!(drvc = di->priv)) | |
574 | return SR_OK; | |
575 | ||
576 | ret = clear_instances(); | |
577 | ||
578 | g_free(drvc); | |
579 | di->priv = NULL; | |
580 | ||
581 | return ret; | |
582 | } | |
583 | ||
584 | static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi) | |
585 | { | |
586 | struct dev_context *devc; | |
587 | struct sr_usb_dev_inst *usb; | |
588 | char str[128]; | |
589 | ||
590 | switch (id) { | |
591 | case SR_CONF_CONN: | |
592 | if (!sdi || !sdi->conn) | |
593 | return SR_ERR_ARG; | |
594 | usb = sdi->conn; | |
595 | if (usb->address == 255) | |
596 | /* Device still needs to re-enumerate after firmware | |
597 | * upload, so we don't know its (future) address. */ | |
598 | return SR_ERR; | |
599 | snprintf(str, 128, "%d.%d", usb->bus, usb->address); | |
600 | *data = g_variant_new_string(str); | |
601 | break; | |
602 | case SR_CONF_SAMPLERATE: | |
603 | if (!sdi) | |
604 | return SR_ERR; | |
605 | devc = sdi->priv; | |
606 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
607 | break; | |
608 | default: | |
609 | return SR_ERR_NA; | |
610 | } | |
611 | ||
612 | return SR_OK; | |
613 | } | |
614 | ||
615 | static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi) | |
616 | { | |
617 | struct dev_context *devc; | |
618 | int ret; | |
619 | ||
620 | devc = sdi->priv; | |
621 | ||
622 | if (id == SR_CONF_SAMPLERATE) { | |
623 | devc->cur_samplerate = g_variant_get_uint64(data); | |
624 | ret = SR_OK; | |
625 | } else if (id == SR_CONF_LIMIT_SAMPLES) { | |
626 | devc->limit_samples = g_variant_get_uint64(data); | |
627 | ret = SR_OK; | |
628 | } else { | |
629 | ret = SR_ERR_NA; | |
630 | } | |
631 | ||
632 | return ret; | |
633 | } | |
634 | ||
635 | static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi) | |
636 | { | |
637 | GVariant *gvar; | |
638 | GVariantBuilder gvb; | |
639 | ||
640 | (void)sdi; | |
641 | ||
642 | switch (key) { | |
643 | case SR_CONF_SCAN_OPTIONS: | |
644 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
645 | hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t)); | |
646 | break; | |
647 | case SR_CONF_DEVICE_OPTIONS: | |
648 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
649 | hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t)); | |
650 | break; | |
651 | case SR_CONF_SAMPLERATE: | |
652 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
653 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates, | |
654 | ARRAY_SIZE(samplerates), sizeof(uint64_t)); | |
655 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
656 | *data = g_variant_builder_end(&gvb); | |
657 | break; | |
658 | case SR_CONF_TRIGGER_TYPE: | |
659 | *data = g_variant_new_string(TRIGGER_TYPE); | |
660 | break; | |
661 | default: | |
662 | return SR_ERR_NA; | |
663 | } | |
664 | ||
665 | return SR_OK; | |
666 | } | |
667 | ||
668 | static int receive_data(int fd, int revents, void *cb_data) | |
669 | { | |
670 | struct timeval tv; | |
671 | struct drv_context *drvc; | |
672 | ||
673 | (void)fd; | |
674 | (void)revents; | |
675 | (void)cb_data; | |
676 | ||
677 | drvc = di->priv; | |
678 | ||
679 | tv.tv_sec = tv.tv_usec = 0; | |
680 | libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv); | |
681 | ||
682 | return TRUE; | |
683 | } | |
684 | ||
685 | static void abort_acquisition(struct dev_context *devc) | |
686 | { | |
687 | int i; | |
688 | ||
689 | devc->num_samples = -1; | |
690 | ||
691 | for (i = devc->num_transfers - 1; i >= 0; i--) { | |
692 | if (devc->transfers[i]) | |
693 | libusb_cancel_transfer(devc->transfers[i]); | |
694 | } | |
695 | } | |
696 | ||
697 | static void finish_acquisition(struct dev_context *devc) | |
698 | { | |
699 | struct sr_datafeed_packet packet; | |
700 | struct drv_context *drvc = di->priv; | |
701 | const struct libusb_pollfd **lupfd; | |
702 | int i; | |
703 | ||
704 | /* Terminate session. */ | |
705 | packet.type = SR_DF_END; | |
706 | sr_session_send(devc->cb_data, &packet); | |
707 | ||
708 | /* Remove fds from polling. */ | |
709 | lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx); | |
710 | for (i = 0; lupfd[i]; i++) | |
711 | sr_source_remove(lupfd[i]->fd); | |
712 | free(lupfd); /* NOT g_free()! */ | |
713 | ||
714 | devc->num_transfers = 0; | |
715 | g_free(devc->transfers); | |
716 | } | |
717 | ||
718 | static void free_transfer(struct libusb_transfer *transfer) | |
719 | { | |
720 | struct dev_context *devc; | |
721 | unsigned int i; | |
722 | ||
723 | devc = transfer->user_data; | |
724 | ||
725 | g_free(transfer->buffer); | |
726 | transfer->buffer = NULL; | |
727 | libusb_free_transfer(transfer); | |
728 | ||
729 | for (i = 0; i < devc->num_transfers; i++) { | |
730 | if (devc->transfers[i] == transfer) { | |
731 | devc->transfers[i] = NULL; | |
732 | break; | |
733 | } | |
734 | } | |
735 | ||
736 | devc->submitted_transfers--; | |
737 | if (devc->submitted_transfers == 0) | |
738 | finish_acquisition(devc); | |
739 | } | |
740 | ||
741 | static void resubmit_transfer(struct libusb_transfer *transfer) | |
742 | { | |
743 | int ret; | |
744 | ||
745 | if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS) | |
746 | return; | |
747 | ||
748 | free_transfer(transfer); | |
749 | /* TODO: Stop session? */ | |
750 | ||
751 | sr_err("%s: %s", __func__, libusb_error_name(ret)); | |
752 | } | |
753 | ||
754 | static void receive_transfer(struct libusb_transfer *transfer) | |
755 | { | |
756 | gboolean packet_has_error = FALSE; | |
757 | struct sr_datafeed_packet packet; | |
758 | struct sr_datafeed_logic logic; | |
759 | struct dev_context *devc; | |
760 | int trigger_offset, i, sample_width, cur_sample_count; | |
761 | int trigger_offset_bytes; | |
762 | uint8_t *cur_buf; | |
763 | ||
764 | devc = transfer->user_data; | |
765 | ||
766 | /* | |
767 | * If acquisition has already ended, just free any queued up | |
768 | * transfer that come in. | |
769 | */ | |
770 | if (devc->num_samples == -1) { | |
771 | free_transfer(transfer); | |
772 | return; | |
773 | } | |
774 | ||
775 | sr_info("receive_transfer(): status %d received %d bytes.", | |
776 | transfer->status, transfer->actual_length); | |
777 | ||
778 | /* Save incoming transfer before reusing the transfer struct. */ | |
779 | cur_buf = transfer->buffer; | |
780 | sample_width = devc->sample_wide ? 2 : 1; | |
781 | cur_sample_count = transfer->actual_length / sample_width; | |
782 | ||
783 | switch (transfer->status) { | |
784 | case LIBUSB_TRANSFER_NO_DEVICE: | |
785 | abort_acquisition(devc); | |
786 | free_transfer(transfer); | |
787 | return; | |
788 | case LIBUSB_TRANSFER_COMPLETED: | |
789 | case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */ | |
790 | break; | |
791 | default: | |
792 | packet_has_error = TRUE; | |
793 | break; | |
794 | } | |
795 | ||
796 | if (transfer->actual_length == 0 || packet_has_error) { | |
797 | devc->empty_transfer_count++; | |
798 | if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) { | |
799 | /* | |
800 | * The FX2 gave up. End the acquisition, the frontend | |
801 | * will work out that the samplecount is short. | |
802 | */ | |
803 | abort_acquisition(devc); | |
804 | free_transfer(transfer); | |
805 | } else { | |
806 | resubmit_transfer(transfer); | |
807 | } | |
808 | return; | |
809 | } else { | |
810 | devc->empty_transfer_count = 0; | |
811 | } | |
812 | ||
813 | trigger_offset = 0; | |
814 | if (devc->trigger_stage >= 0) { | |
815 | for (i = 0; i < cur_sample_count; i++) { | |
816 | ||
817 | const uint16_t cur_sample = devc->sample_wide ? | |
818 | *((const uint16_t*)cur_buf + i) : | |
819 | *((const uint8_t*)cur_buf + i); | |
820 | ||
821 | if ((cur_sample & devc->trigger_mask[devc->trigger_stage]) == | |
822 | devc->trigger_value[devc->trigger_stage]) { | |
823 | /* Match on this trigger stage. */ | |
824 | devc->trigger_buffer[devc->trigger_stage] = cur_sample; | |
825 | devc->trigger_stage++; | |
826 | ||
827 | if (devc->trigger_stage == NUM_TRIGGER_STAGES || | |
828 | devc->trigger_mask[devc->trigger_stage] == 0) { | |
829 | /* Match on all trigger stages, we're done. */ | |
830 | trigger_offset = i + 1; | |
831 | ||
832 | /* | |
833 | * TODO: Send pre-trigger buffer to session bus. | |
834 | * Tell the frontend we hit the trigger here. | |
835 | */ | |
836 | packet.type = SR_DF_TRIGGER; | |
837 | packet.payload = NULL; | |
838 | sr_session_send(devc->cb_data, &packet); | |
839 | ||
840 | /* | |
841 | * Send the samples that triggered it, | |
842 | * since we're skipping past them. | |
843 | */ | |
844 | packet.type = SR_DF_LOGIC; | |
845 | packet.payload = &logic; | |
846 | logic.unitsize = sizeof(*devc->trigger_buffer); | |
847 | logic.length = devc->trigger_stage * logic.unitsize; | |
848 | logic.data = devc->trigger_buffer; | |
849 | sr_session_send(devc->cb_data, &packet); | |
850 | ||
851 | devc->trigger_stage = TRIGGER_FIRED; | |
852 | break; | |
853 | } | |
854 | } else if (devc->trigger_stage > 0) { | |
855 | /* | |
856 | * We had a match before, but not in the next sample. However, we may | |
857 | * have a match on this stage in the next bit -- trigger on 0001 will | |
858 | * fail on seeing 00001, so we need to go back to stage 0 -- but at | |
859 | * the next sample from the one that matched originally, which the | |
860 | * counter increment at the end of the loop takes care of. | |
861 | */ | |
862 | i -= devc->trigger_stage; | |
863 | if (i < -1) | |
864 | i = -1; /* Oops, went back past this buffer. */ | |
865 | /* Reset trigger stage. */ | |
866 | devc->trigger_stage = 0; | |
867 | } | |
868 | } | |
869 | } | |
870 | ||
871 | if (devc->trigger_stage == TRIGGER_FIRED) { | |
872 | /* Send the incoming transfer to the session bus. */ | |
873 | trigger_offset_bytes = trigger_offset * sample_width; | |
874 | packet.type = SR_DF_LOGIC; | |
875 | packet.payload = &logic; | |
876 | logic.length = transfer->actual_length - trigger_offset_bytes; | |
877 | logic.unitsize = sample_width; | |
878 | logic.data = cur_buf + trigger_offset_bytes; | |
879 | sr_session_send(devc->cb_data, &packet); | |
880 | ||
881 | devc->num_samples += cur_sample_count; | |
882 | if (devc->limit_samples && | |
883 | (unsigned int)devc->num_samples > devc->limit_samples) { | |
884 | abort_acquisition(devc); | |
885 | free_transfer(transfer); | |
886 | return; | |
887 | } | |
888 | } else { | |
889 | /* | |
890 | * TODO: Buffer pre-trigger data in capture | |
891 | * ratio-sized buffer. | |
892 | */ | |
893 | } | |
894 | ||
895 | resubmit_transfer(transfer); | |
896 | } | |
897 | ||
898 | static unsigned int to_bytes_per_ms(unsigned int samplerate) | |
899 | { | |
900 | return samplerate / 1000; | |
901 | } | |
902 | ||
903 | static size_t get_buffer_size(struct dev_context *devc) | |
904 | { | |
905 | size_t s; | |
906 | ||
907 | /* | |
908 | * The buffer should be large enough to hold 10ms of data and | |
909 | * a multiple of 512. | |
910 | */ | |
911 | s = 10 * to_bytes_per_ms(devc->cur_samplerate); | |
912 | return (s + 511) & ~511; | |
913 | } | |
914 | ||
915 | static unsigned int get_number_of_transfers(struct dev_context *devc) | |
916 | { | |
917 | unsigned int n; | |
918 | ||
919 | /* Total buffer size should be able to hold about 500ms of data. */ | |
920 | n = 500 * to_bytes_per_ms(devc->cur_samplerate) / get_buffer_size(devc); | |
921 | ||
922 | if (n > NUM_SIMUL_TRANSFERS) | |
923 | return NUM_SIMUL_TRANSFERS; | |
924 | ||
925 | return n; | |
926 | } | |
927 | ||
928 | static unsigned int get_timeout(struct dev_context *devc) | |
929 | { | |
930 | size_t total_size; | |
931 | unsigned int timeout; | |
932 | ||
933 | total_size = get_buffer_size(devc) * get_number_of_transfers(devc); | |
934 | timeout = total_size / to_bytes_per_ms(devc->cur_samplerate); | |
935 | return timeout + timeout / 4; /* Leave a headroom of 25% percent. */ | |
936 | } | |
937 | ||
938 | static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi, | |
939 | void *cb_data) | |
940 | { | |
941 | struct dev_context *devc; | |
942 | struct drv_context *drvc; | |
943 | struct sr_usb_dev_inst *usb; | |
944 | struct libusb_transfer *transfer; | |
945 | const struct libusb_pollfd **lupfd; | |
946 | unsigned int i, timeout, num_transfers; | |
947 | int ret; | |
948 | unsigned char *buf; | |
949 | size_t size; | |
950 | ||
951 | drvc = di->priv; | |
952 | devc = sdi->priv; | |
953 | usb = sdi->conn; | |
954 | ||
955 | if (devc->submitted_transfers != 0) | |
956 | return SR_ERR; | |
957 | ||
958 | if (configure_probes(sdi) != SR_OK) { | |
959 | sr_err("Failed to configure probes."); | |
960 | return SR_ERR; | |
961 | } | |
962 | ||
963 | devc->cb_data = cb_data; | |
964 | devc->num_samples = 0; | |
965 | devc->empty_transfer_count = 0; | |
966 | ||
967 | timeout = get_timeout(devc); | |
968 | num_transfers = get_number_of_transfers(devc); | |
969 | size = get_buffer_size(devc); | |
970 | ||
971 | devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers); | |
972 | if (!devc->transfers) { | |
973 | sr_err("USB transfers malloc failed."); | |
974 | return SR_ERR_MALLOC; | |
975 | } | |
976 | ||
977 | devc->num_transfers = num_transfers; | |
978 | ||
979 | for (i = 0; i < num_transfers; i++) { | |
980 | if (!(buf = g_try_malloc(size))) { | |
981 | sr_err("USB transfer buffer malloc failed."); | |
982 | return SR_ERR_MALLOC; | |
983 | } | |
984 | transfer = libusb_alloc_transfer(0); | |
985 | libusb_fill_bulk_transfer(transfer, usb->devhdl, | |
986 | 2 | LIBUSB_ENDPOINT_IN, buf, size, | |
987 | receive_transfer, devc, timeout); | |
988 | if ((ret = libusb_submit_transfer(transfer)) != 0) { | |
989 | sr_err("Failed to submit transfer: %s.", | |
990 | libusb_error_name(ret)); | |
991 | libusb_free_transfer(transfer); | |
992 | g_free(buf); | |
993 | abort_acquisition(devc); | |
994 | return SR_ERR; | |
995 | } | |
996 | devc->transfers[i] = transfer; | |
997 | devc->submitted_transfers++; | |
998 | } | |
999 | ||
1000 | lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx); | |
1001 | for (i = 0; lupfd[i]; i++) | |
1002 | sr_source_add(lupfd[i]->fd, lupfd[i]->events, | |
1003 | timeout, receive_data, NULL); | |
1004 | free(lupfd); /* NOT g_free()! */ | |
1005 | ||
1006 | /* Send header packet to the session bus. */ | |
1007 | std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN); | |
1008 | ||
1009 | if ((ret = command_start_acquisition (usb->devhdl, | |
1010 | devc->cur_samplerate, devc->sample_wide)) != SR_OK) { | |
1011 | abort_acquisition(devc); | |
1012 | return ret; | |
1013 | } | |
1014 | ||
1015 | return SR_OK; | |
1016 | } | |
1017 | ||
1018 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ | |
1019 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
1020 | { | |
1021 | (void)cb_data; | |
1022 | ||
1023 | abort_acquisition(sdi->priv); | |
1024 | ||
1025 | return SR_OK; | |
1026 | } | |
1027 | ||
1028 | SR_PRIV struct sr_dev_driver fx2lafw_driver_info = { | |
1029 | .name = "fx2lafw", | |
1030 | .longname = "fx2lafw (generic driver for FX2 based LAs)", | |
1031 | .api_version = 1, | |
1032 | .init = hw_init, | |
1033 | .cleanup = hw_cleanup, | |
1034 | .scan = hw_scan, | |
1035 | .dev_list = hw_dev_list, | |
1036 | .dev_clear = clear_instances, | |
1037 | .config_get = config_get, | |
1038 | .config_set = config_set, | |
1039 | .config_list = config_list, | |
1040 | .dev_open = hw_dev_open, | |
1041 | .dev_close = hw_dev_close, | |
1042 | .dev_acquisition_start = hw_dev_acquisition_start, | |
1043 | .dev_acquisition_stop = hw_dev_acquisition_stop, | |
1044 | .priv = NULL, | |
1045 | }; |