kingst-la2016: add support for kingst la1016

[libsigrok.git] / src / hardware / kingst-la2016 / protocol.h

/*
 * This file is part of the libsigrok project.
 *
 * Copyright (C) 2020 Florian Schmidt <schmidt_florian@gmx.de>
 * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H
#define LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H

#include <stdint.h>
#include <glib.h>
#include <libsigrok/libsigrok.h>
#include "libsigrok-internal.h"

#define LOG_PREFIX "kingst-la2016"

#define LA2016_VID		0x77a1
#define LA2016_PID		0x01a2
#define USB_INTERFACE		0
#define USB_CONFIGURATION	1

#define LA2016_BULK_MAX         8388608

#define MAX_RENUM_DELAY_MS	3000
#define DEFAULT_TIMEOUT_MS      200

#define LA2016_THR_VOLTAGE_MIN  0.40
#define LA2016_THR_VOLTAGE_MAX  4.00

#define LA2016_NUM_SAMPLES_MIN  256
#define LA2016_NUM_SAMPLES_MAX  (10UL * 1000 * 1000 * 1000)

typedef struct pwm_setting_dev {
	uint32_t period;
	uint32_t duty;
} pwm_setting_dev_t;

typedef struct trigger_cfg {
	uint32_t channels;
	uint32_t enabled;
	uint32_t level;
	uint32_t high_or_falling;
} trigger_cfg_t;

typedef struct capture_info {
	uint32_t n_rep_packets;
	uint32_t n_rep_packets_before_trigger;
	uint32_t write_pos;
} capture_info_t;

#define NUM_PACKETS_IN_CHUNK 5
#define TRANSFER_PACKET_LENGTH 16

typedef struct pwm_setting {
	uint8_t enabled;
	float freq;
	float duty;
} pwm_setting_t;

struct dev_context {
	struct sr_context *ctx;

	int64_t fw_updated;
	pwm_setting_t pwm_setting[2];
	unsigned int threshold_voltage_idx;
	float threshold_voltage;
	uint64_t max_samplerate;
	uint64_t cur_samplerate;
	uint64_t limit_samples;
	uint64_t capture_ratio;
	uint16_t cur_channels;
	int num_channels;

	uint32_t bitstream_size;

	/* derived stuff */
	uint64_t pre_trigger_size;

	/* state after sampling */
	int had_triggers_configured;
	int have_trigger;
	int transfer_finished;
	capture_info_t info;
	unsigned int n_transfer_packets_to_read; /* each with 5 acq packets */
	unsigned int n_bytes_to_read;
	unsigned int n_reps_until_trigger;
	unsigned int reading_behind_trigger;
	uint64_t total_samples;
	uint32_t read_pos;

	unsigned int convbuffer_size;
	uint8_t *convbuffer;
	struct libusb_transfer *transfer;
};

SR_PRIV int la2016_upload_firmware(struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id);
SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_start_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_stop_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_abort_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_has_triggered(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_start_retrieval(const struct sr_dev_inst *sdi, libusb_transfer_cb_fn cb);
SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_deinit_device(const struct sr_dev_inst *sdi);

#endif