[libsigrok.git] / hardware / saleae-logic16 / protocol.c

/*
 * This file is part of the libsigrok project.
 *
 * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "protocol.h"

#include <stdint.h>
#include <string.h>
#include <glib.h>
#include <glib/gstdio.h>
#include <stdio.h>
#include <errno.h>
#include <math.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"

#define FPGA_FIRMWARE_18	FIRMWARE_DIR"/saleae-logic16-fpga-18.bitstream"
#define FPGA_FIRMWARE_33	FIRMWARE_DIR"/saleae-logic16-fpga-33.bitstream"

#define MAX_SAMPLE_RATE		SR_MHZ(100)
#define MAX_4CH_SAMPLE_RATE	SR_MHZ(50)
#define MAX_7CH_SAMPLE_RATE	SR_MHZ(40)
#define MAX_8CH_SAMPLE_RATE	SR_MHZ(32)
#define MAX_10CH_SAMPLE_RATE	SR_MHZ(25)
#define MAX_13CH_SAMPLE_RATE	SR_MHZ(16)

#define BASE_CLOCK_0_FREQ	SR_MHZ(100)
#define BASE_CLOCK_1_FREQ	SR_MHZ(160)

#define COMMAND_START_ACQUISITION	1
#define COMMAND_ABORT_ACQUISITION_ASYNC	2
#define COMMAND_WRITE_EEPROM		6
#define COMMAND_READ_EEPROM		7
#define COMMAND_WRITE_LED_TABLE		0x7a
#define COMMAND_SET_LED_MODE		0x7b
#define COMMAND_RETURN_TO_BOOTLOADER	0x7c
#define COMMAND_ABORT_ACQUISITION_SYNC	0x7d
#define COMMAND_FPGA_UPLOAD_INIT	0x7e
#define COMMAND_FPGA_UPLOAD_SEND_DATA	0x7f
#define COMMAND_FPGA_WRITE_REGISTER	0x80
#define COMMAND_FPGA_READ_REGISTER	0x81
#define COMMAND_GET_REVID		0x82

#define WRITE_EEPROM_COOKIE1		0x42
#define WRITE_EEPROM_COOKIE2		0x55
#define READ_EEPROM_COOKIE1		0x33
#define READ_EEPROM_COOKIE2		0x81
#define ABORT_ACQUISITION_SYNC_PATTERN	0x55

#define MAX_EMPTY_TRANSFERS		64


static void encrypt(uint8_t *dest, const uint8_t *src, uint8_t cnt)
{
	uint8_t state1 = 0x9b, state2 = 0x54;
	int i;

	for (i=0; i<cnt; i++) {
		uint8_t t, v = src[i];
		t = (((v ^ state2 ^ 0x2b) - 0x05) ^ 0x35) - 0x39;
		t = (((t ^ state1 ^ 0x5a) - 0xb0) ^ 0x38) - 0x45;
		dest[i] = state2 = t;
		state1 = v;
	}
}

static void decrypt(uint8_t *dest, const uint8_t *src, uint8_t cnt)
{
	uint8_t state1 = 0x9b, state2 = 0x54;
	int i;
	for (i=0; i<cnt; i++) {
		uint8_t t, v = src[i];
		t = (((v + 0x45) ^ 0x38) + 0xb0) ^ 0x5a ^ state1;
		t = (((t + 0x39) ^ 0x35) + 0x05) ^ 0x2b ^ state2;
		dest[i] = state1 = t;
		state2 = v;
	}
}

static int do_ep1_command(const struct sr_dev_inst *sdi,
			  const uint8_t *command, uint8_t cmd_len,
			  uint8_t *reply, uint8_t reply_len)
{
	uint8_t buf[64];
	struct sr_usb_dev_inst *usb;
	int ret, xfer;

	usb = sdi->conn;

	if (cmd_len < 1 || cmd_len > 64 || reply_len > 64 ||
	    command == NULL || (reply_len > 0 && reply == NULL))
		return SR_ERR_ARG;

	encrypt(buf, command, cmd_len);

	ret = libusb_bulk_transfer(usb->devhdl, 1, buf, cmd_len, &xfer, 1000);
	if (ret != 0) {
		sr_dbg("Failed to send EP1 command 0x%02x: %s",
		       command[0], libusb_error_name(ret));
		return SR_ERR;
	}
	if (xfer != cmd_len) {
		sr_dbg("Failed to send EP1 command 0x%02x: incorrect length %d != %d",
		       xfer, cmd_len);
		return SR_ERR;
	}

	if (reply_len == 0)
		return SR_OK;

	ret = libusb_bulk_transfer(usb->devhdl, 0x80 | 1, buf, reply_len, &xfer, 1000);
	if (ret != 0) {
		sr_dbg("Failed to receive reply to EP1 command 0x%02x: %s",
		       command[0], libusb_error_name(ret));
		return SR_ERR;
	}
	if (xfer != reply_len) {
		sr_dbg("Failed to receive reply to EP1 command 0x%02x: incorrect length %d != %d",
		       xfer, reply_len);
		return SR_ERR;
	}

	decrypt(reply, buf, reply_len);

	return SR_OK;
}

static int read_eeprom(const struct sr_dev_inst *sdi,
		       uint8_t address, uint8_t length, uint8_t *buf)
{
	uint8_t command[5] = {
		COMMAND_READ_EEPROM,
		READ_EEPROM_COOKIE1,
		READ_EEPROM_COOKIE2,
		address,
		length,
	};

	return do_ep1_command(sdi, command, 5, buf, length);
}

static int upload_led_table(const struct sr_dev_inst *sdi,
			    const uint8_t *table, uint8_t offset, uint8_t cnt)
{
	uint8_t command[64];
	int ret;

	if (cnt < 1 || cnt+offset > 64 || table == NULL)
		return SR_ERR_ARG;

	while (cnt > 0) {
		uint8_t chunk = (cnt > 32? 32 : cnt);

		command[0] = COMMAND_WRITE_LED_TABLE;
		command[1] = offset;
		command[2] = chunk;
		memcpy(command+3, table, chunk);

		if ((ret = do_ep1_command(sdi, command, 3+chunk, NULL, 0)) != SR_OK)
			return ret;

		table += chunk;
		offset += chunk;
		cnt -= chunk;
	}

	return SR_OK;
}

static int set_led_mode(const struct sr_dev_inst *sdi,
			uint8_t animate, uint16_t t2reload, uint8_t div,
			uint8_t repeat)
{
	uint8_t command[6] = {
		COMMAND_SET_LED_MODE,
		animate,
		t2reload&0xff,
		t2reload>>8,
		div,
		repeat,
	};

	return do_ep1_command(sdi, command, 6, NULL, 0);
}

static int read_fpga_register(const struct sr_dev_inst *sdi,
			      uint8_t address, uint8_t *value)
{
	uint8_t command[3] = {
		COMMAND_FPGA_READ_REGISTER,
		1,
		address,
	};

	return do_ep1_command(sdi, command, 3, value, 1);
}

static int write_fpga_registers(const struct sr_dev_inst *sdi,
				uint8_t (*regs)[2], uint8_t cnt)
{
	uint8_t command[64];
	int i;

	if (cnt < 1 || cnt > 31)
		return SR_ERR_ARG;

	command[0] = COMMAND_FPGA_WRITE_REGISTER;
	command[1] = cnt;
	for (i=0; i<cnt; i++) {
		command[2+2*i] = regs[i][0];
		command[3+2*i] = regs[i][1];
	}

	return do_ep1_command(sdi, command, 2*(cnt+1), NULL, 0);
}

static int write_fpga_register(const struct sr_dev_inst *sdi,
			       uint8_t address, uint8_t value)
{
	uint8_t regs[2] = { address, value };
	return write_fpga_registers(sdi, &regs, 1);
}


static uint8_t map_eeprom_data(uint8_t v)
{
	/* ??? */
	switch (v) {
	case 0x00: return 0x7a;
	case 0x01: return 0x79;
	case 0x05: return 0x85;
	case 0x10: return 0x6a;
	case 0x11: return 0x69;
	case 0x14: return 0x76;
	case 0x15: return 0x75;
	case 0x41: return 0x39;
	case 0x50: return 0x2a;
	case 0x51: return 0x29;
	case 0x55: return 0x35;
	default:
		sr_err("No mapping of 0x%02x defined", v);
		return 0xff;
	}
}

static int prime_fpga(const struct sr_dev_inst *sdi)
{
	uint8_t eeprom_data[16];
	uint8_t old_reg_10, status;
	uint8_t regs[8][2] = {
		{10, 0x00},
		{10, 0x40},
		{12, 0},
		{10, 0xc0},
		{10, 0x40},
		{ 6, 0},
		{ 7, 1},
		{ 7, 0}
	};
	int i, ret;

	if ((ret = read_eeprom(sdi, 16, 16, eeprom_data)) != SR_OK)
		return ret;

	if ((ret = read_fpga_register(sdi, 10, &old_reg_10)) != SR_OK)
		return ret;

	for (i=0; i<16; i++) {
		regs[2][1] = eeprom_data[i];
		regs[5][1] = map_eeprom_data(eeprom_data[i]);
		if (i)
			ret = write_fpga_registers(sdi, &regs[2], 6);
		else
			ret = write_fpga_registers(sdi, &regs[0], 8);
		if (ret != SR_OK)
			return ret;
	}

	if ((ret = write_fpga_register(sdi, 10, old_reg_10)) != SR_OK)
		return ret;

	if ((ret = read_fpga_register(sdi, 0, &status)) != SR_OK)
		return ret;

	if (status != 0x10) {
		sr_err("Invalid FPGA status: 0x%02x != 0x10", status);
		return SR_ERR;
	}

	return SR_OK;
}

static void make_heartbeat(uint8_t *table, int len)
{
	int i, j;

	memset(table, 0, len);
	len >>= 3;
	for (i=0; i<2; i++)
		for (j=0; j<len; j++)
			*table++ = sin(j*M_PI/len)*255;
}

static int configure_led(const struct sr_dev_inst *sdi)
{
	uint8_t table[64];
	int ret;

	make_heartbeat(table, 64);
	if ((ret = upload_led_table(sdi, table, 0, 64)) != SR_OK)
		return ret;

	return set_led_mode(sdi, 1, 6250, 0, 1);
}

static int upload_fpga_bitstream(const struct sr_dev_inst *sdi,
				 enum voltage_range vrange)
{
	struct dev_context *devc;
	int offset, chunksize, ret;
	const char *filename;
	FILE *fw;
	unsigned char buf[256*62];

	devc = sdi->priv;

	if (devc->cur_voltage_range == vrange)
		return SR_OK;

	switch (vrange) {
	case VOLTAGE_RANGE_18_33_V:
		filename = FPGA_FIRMWARE_18;
		break;
	case VOLTAGE_RANGE_5_V:
		filename = FPGA_FIRMWARE_33;
		break;
	default:
		sr_err("Unsupported voltage range");
		return SR_ERR;
	}

	sr_info("Uploading FPGA bitstream at %s", filename);
	if ((fw = g_fopen(filename, "rb")) == NULL) {
		sr_err("Unable to open bitstream file %s for reading: %s",
		       filename, strerror(errno));
		return SR_ERR;
	}

	buf[0] = COMMAND_FPGA_UPLOAD_INIT;
	if ((ret = do_ep1_command(sdi, buf, 1, NULL, 0)) != SR_OK) {
		fclose(fw);
		return ret;
	}

	while (1) {
		chunksize = fread(buf, 1, sizeof(buf), fw);
		if (chunksize == 0)
			break;

		for (offset = 0; offset < chunksize; offset += 62) {
			uint8_t command[64];
			uint8_t len = (offset + 62 > chunksize?
				       chunksize - offset : 62);
			command[0] = COMMAND_FPGA_UPLOAD_SEND_DATA;
			command[1] = len;
			memcpy(command+2, buf+offset, len);
			if ((ret = do_ep1_command(sdi, command, len+2, NULL, 0)) != SR_OK) {
				fclose(fw);
				return ret;
			}
		}

		sr_info("Uploaded %d bytes", chunksize);
	}
	fclose(fw);
	sr_info("FPGA bitstream upload done");

	if ((ret = prime_fpga(sdi)) != SR_OK)
		return ret;

	if ((ret = configure_led(sdi)) != SR_OK)
		return ret;

	devc->cur_voltage_range = vrange;
	return SR_OK;
}

static int abort_acquisition_sync(const struct sr_dev_inst *sdi)
{
	static const uint8_t command[2] = {
		COMMAND_ABORT_ACQUISITION_SYNC,
		ABORT_ACQUISITION_SYNC_PATTERN,
	};
	uint8_t reply, expected_reply;
	int ret;

	if ((ret = do_ep1_command(sdi, command, 2, &reply, 1)) != SR_OK)
		return ret;

	expected_reply = ~command[1];
	if (reply != expected_reply) {
		sr_err("Invalid response for abort acquisition command: "
		       "0x%02x != 0x%02x", reply, expected_reply);
		return SR_ERR;
	}

	return SR_OK;
}

SR_PRIV int saleae_logic16_setup_acquisition(const struct sr_dev_inst *sdi,
					     uint64_t samplerate,
					     uint16_t channels)
{
	uint8_t clock_select, reg1, reg10;
	uint64_t div;
	int i, ret, nchan = 0;

	if (samplerate == 0 || samplerate > MAX_SAMPLE_RATE) {
		sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
		return SR_ERR;
	}

	if (BASE_CLOCK_0_FREQ % samplerate == 0 &&
	    (div = BASE_CLOCK_0_FREQ / samplerate) <= 256) {
		clock_select = 0;
	} else if (BASE_CLOCK_1_FREQ % samplerate == 0 &&
		   (div = BASE_CLOCK_1_FREQ / samplerate) <= 256) {
		clock_select = 1;
	} else {
		sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
		return SR_ERR;
	}

	for (i=0; i<16; i++)
		if (channels & (1U<<i))
			nchan++;

	if ((nchan >= 13 && samplerate > MAX_13CH_SAMPLE_RATE) ||
	    (nchan >= 10 && samplerate > MAX_10CH_SAMPLE_RATE) ||
	    (nchan >= 8  && samplerate > MAX_8CH_SAMPLE_RATE) ||
	    (nchan >= 7  && samplerate > MAX_7CH_SAMPLE_RATE) ||
	    (nchan >= 4  && samplerate > MAX_4CH_SAMPLE_RATE)) {
		sr_err("Unable to sample at %" PRIu64 "Hz "
		       "with this many channels.", samplerate);
		return SR_ERR;
	}

	if ((ret = read_fpga_register(sdi, 1, &reg1)) != SR_OK)
		return ret;

	if (reg1 != 0x08) {
		sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x08", reg1);
		return SR_ERR;
	}

	if ((ret = write_fpga_register(sdi, 1, 0x40)) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 10, clock_select)) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 4, (uint8_t)(div-1))) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 2, (uint8_t)(channels & 0xff))) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 3, (uint8_t)(channels >> 8))) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 1, 0x42)) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 1, 0x40)) != SR_OK)
		return ret;

	if ((ret = read_fpga_register(sdi, 1, &reg1)) != SR_OK)
		return ret;

	if (reg1 != 0x48) {
		sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x48", reg1);
		return SR_ERR;
	}

	if ((ret = read_fpga_register(sdi, 10, &reg10)) != SR_OK)
		return ret;

	if (reg10 != clock_select) {
		sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x%02x",
		       reg10, (unsigned)clock_select);
		return SR_ERR;
	}

	return SR_OK;
}

SR_PRIV int saleae_logic16_start_acquisition(const struct sr_dev_inst *sdi)
{
	static const uint8_t command[1] = {
		COMMAND_START_ACQUISITION,
	};
	int ret;

	if ((ret = do_ep1_command(sdi, command, 1, NULL, 0)) != SR_OK)
		return ret;

	return write_fpga_register(sdi, 1, 0x41);
}

SR_PRIV int saleae_logic16_abort_acquisition(const struct sr_dev_inst *sdi)
{
	static const uint8_t command[1] = {
		COMMAND_ABORT_ACQUISITION_ASYNC,
	};
	int ret;
	uint8_t reg1, reg8, reg9;

	if ((ret = do_ep1_command(sdi, command, 1, NULL, 0)) != SR_OK)
		return ret;

	if ((ret = write_fpga_register(sdi, 1, 0x00)) != SR_OK)
		return ret;

	if ((ret = read_fpga_register(sdi, 1, &reg1)) != SR_OK)
		return ret;

	if (reg1 != 0x08) {
		sr_dbg("Invalid state at acquisition stop: 0x%02x != 0x08", reg1);
		return SR_ERR;
	}

	if ((ret = read_fpga_register(sdi, 8, &reg8)) != SR_OK)
		return ret;

	if ((ret = read_fpga_register(sdi, 9, &reg9)) != SR_OK)
		return ret;

	return SR_OK;
}

SR_PRIV int saleae_logic16_init_device(const struct sr_dev_inst *sdi)
{
	struct dev_context *devc;
	int ret;

	devc = sdi->priv;

	devc->cur_voltage_range = VOLTAGE_RANGE_UNKNOWN;

	if ((ret = abort_acquisition_sync(sdi)) != SR_OK)
		return ret;

	if ((ret = read_eeprom(sdi, 8, 8, devc->eeprom_data)) != SR_OK)
		return ret;

	if ((ret = upload_fpga_bitstream(sdi, VOLTAGE_RANGE_18_33_V)) != SR_OK)
		return ret;

	return SR_OK;
}

static void finish_acquisition(struct dev_context *devc)
{
	struct sr_datafeed_packet packet;
	int i;

	/* Terminate session. */
	packet.type = SR_DF_END;
	sr_session_send(devc->cb_data, &packet);

	/* Remove fds from polling. */
	if (devc->usbfd != NULL) {
		for (i = 0; devc->usbfd[i] != -1; i++)
			sr_source_remove(devc->usbfd[i]);
		g_free(devc->usbfd);
	}

	devc->num_transfers = 0;
	g_free(devc->transfers);
	g_free(devc->convbuffer);
}

static void free_transfer(struct libusb_transfer *transfer)
{
	struct dev_context *devc;
	unsigned int i;

	devc = transfer->user_data;

	g_free(transfer->buffer);
	transfer->buffer = NULL;
	libusb_free_transfer(transfer);

	for (i = 0; i < devc->num_transfers; i++) {
		if (devc->transfers[i] == transfer) {
			devc->transfers[i] = NULL;
			break;
		}
	}

	devc->submitted_transfers--;
	if (devc->submitted_transfers == 0)
		finish_acquisition(devc);
}

static void resubmit_transfer(struct libusb_transfer *transfer)
{
	int ret;

	if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
		return;

	free_transfer(transfer);
	/* TODO: Stop session? */

	sr_err("%s: %s", __func__, libusb_error_name(ret));
}

static size_t convert_sample_data(struct dev_context *devc,
				  uint8_t *dest, size_t destcnt,
				  const uint8_t *src, size_t srccnt)
{
	uint16_t *channel_data;
	int i, cur_channel;
	size_t ret = 0;

	srccnt /= 2;

	channel_data = devc->channel_data;
	cur_channel = devc->cur_channel;

	while(srccnt--) {
		uint16_t sample, channel_mask;

		sample = src[0] | (src[1] << 8);
		src += 2;

		channel_mask = devc->channel_masks[cur_channel];

		for (i=15; i>=0; --i, sample >>= 1)
			if (sample & 1)
				channel_data[i] |= channel_mask;

		if (++cur_channel == devc->num_channels) {
			cur_channel = 0;
			if (destcnt < 16*2) {
				sr_err("Conversion buffer too small!");
				break;
			}
			memcpy(dest, channel_data, 16*2);
			memset(channel_data, 0, 16*2);
			dest += 16*2;
			ret += 16*2;
			destcnt -= 16*2;
		}
	}

	devc->cur_channel = cur_channel;

	return ret;
}

SR_PRIV void saleae_logic16_receive_transfer(struct libusb_transfer *transfer)
{
	gboolean packet_has_error = FALSE;
	struct sr_datafeed_packet packet;
	struct sr_datafeed_logic logic;
	struct dev_context *devc;
	size_t converted_length;

	devc = transfer->user_data;

	/*
	 * If acquisition has already ended, just free any queued up
	 * transfer that come in.
	 */
	if (devc->num_samples < 0) {
		free_transfer(transfer);
		return;
	}

	sr_info("receive_transfer(): status %d received %d bytes.",
		transfer->status, transfer->actual_length);

	switch (transfer->status) {
	case LIBUSB_TRANSFER_NO_DEVICE:
		devc->num_samples = -2;
		free_transfer(transfer);
		return;
	case LIBUSB_TRANSFER_COMPLETED:
	case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
		break;
	default:
		packet_has_error = TRUE;
		break;
	}

	if (transfer->actual_length & 1) {
		sr_err("Got an odd number of bytes from the device.  This should not happen.");
		/* Bail out right away */
		packet_has_error = TRUE;
		devc->empty_transfer_count = MAX_EMPTY_TRANSFERS;
	}

	if (transfer->actual_length == 0 || packet_has_error) {
		devc->empty_transfer_count++;
		if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
			/*
			 * The FX2 gave up. End the acquisition, the frontend
			 * will work out that the samplecount is short.
			 */
			devc->num_samples = -2;
			free_transfer(transfer);
		} else {
			resubmit_transfer(transfer);
		}
		return;
	} else {
		devc->empty_transfer_count = 0;
	}

	converted_length =
		convert_sample_data(devc,
				    devc->convbuffer, devc->convbuffer_size,
				    transfer->buffer, transfer->actual_length);

	if (converted_length > 0) {
		/* Send the incoming transfer to the session bus. */
		packet.type = SR_DF_LOGIC;
		packet.payload = &logic;
		logic.length = converted_length;
		logic.unitsize = 2;
		logic.data = devc->convbuffer;
		sr_session_send(devc->cb_data, &packet);

		devc->num_samples += converted_length / 2;
		if (devc->limit_samples &&
		    (uint64_t)devc->num_samples > devc->limit_samples) {
			devc->num_samples = -2;
			free_transfer(transfer);
			return;
		}
	}

	resubmit_transfer(transfer);
}
Commit	Line	Data
c463dcf0 MC	1	/*
	2	* This file is part of the libsigrok project.
	3	*
	4	* Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
	5	*
	6	* This program is free software: you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation, either version 3 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program. If not, see <http://www.gnu.org/licenses/>.
	18	*/
	19
	20	#include "protocol.h"
	21
15abcf0f MC	22	#include <stdint.h>
	23	#include <string.h>
	24	#include <glib.h>
	25	#include <glib/gstdio.h>
	26	#include <stdio.h>
	27	#include <errno.h>
	28	#include <math.h>
	29	#include "libsigrok.h"
	30	#include "libsigrok-internal.h"
	31
	32	#define FPGA_FIRMWARE_18 FIRMWARE_DIR"/saleae-logic16-fpga-18.bitstream"
	33	#define FPGA_FIRMWARE_33 FIRMWARE_DIR"/saleae-logic16-fpga-33.bitstream"
	34
7b5daad4 MC	35	#define MAX_SAMPLE_RATE SR_MHZ(100)
	36	#define MAX_4CH_SAMPLE_RATE SR_MHZ(50)
	37	#define MAX_7CH_SAMPLE_RATE SR_MHZ(40)
	38	#define MAX_8CH_SAMPLE_RATE SR_MHZ(32)
	39	#define MAX_10CH_SAMPLE_RATE SR_MHZ(25)
	40	#define MAX_13CH_SAMPLE_RATE SR_MHZ(16)
	41
	42	#define BASE_CLOCK_0_FREQ SR_MHZ(100)
	43	#define BASE_CLOCK_1_FREQ SR_MHZ(160)
	44
15abcf0f MC	45	#define COMMAND_START_ACQUISITION 1
	46	#define COMMAND_ABORT_ACQUISITION_ASYNC 2
	47	#define COMMAND_WRITE_EEPROM 6
	48	#define COMMAND_READ_EEPROM 7
	49	#define COMMAND_WRITE_LED_TABLE 0x7a
	50	#define COMMAND_SET_LED_MODE 0x7b
	51	#define COMMAND_RETURN_TO_BOOTLOADER 0x7c
	52	#define COMMAND_ABORT_ACQUISITION_SYNC 0x7d
	53	#define COMMAND_FPGA_UPLOAD_INIT 0x7e
	54	#define COMMAND_FPGA_UPLOAD_SEND_DATA 0x7f
	55	#define COMMAND_FPGA_WRITE_REGISTER 0x80
	56	#define COMMAND_FPGA_READ_REGISTER 0x81
	57	#define COMMAND_GET_REVID 0x82
	58
	59	#define WRITE_EEPROM_COOKIE1 0x42
	60	#define WRITE_EEPROM_COOKIE2 0x55
	61	#define READ_EEPROM_COOKIE1 0x33
	62	#define READ_EEPROM_COOKIE2 0x81
	63	#define ABORT_ACQUISITION_SYNC_PATTERN 0x55
	64
7b5daad4 MC	65	#define MAX_EMPTY_TRANSFERS 64
7b5daad4 MC	66
15abcf0f MC	67
	68	static void encrypt(uint8_t dest, const uint8_t src, uint8_t cnt)
	69	{
	70	uint8_t state1 = 0x9b, state2 = 0x54;
	71	int i;
	72
	73	for (i=0; i<cnt; i++) {
	74	uint8_t t, v = src[i];
	75	t = (((v ^ state2 ^ 0x2b) - 0x05) ^ 0x35) - 0x39;
	76	t = (((t ^ state1 ^ 0x5a) - 0xb0) ^ 0x38) - 0x45;
	77	dest[i] = state2 = t;
	78	state1 = v;
	79	}
	80	}
	81
	82	static void decrypt(uint8_t dest, const uint8_t src, uint8_t cnt)
	83	{
	84	uint8_t state1 = 0x9b, state2 = 0x54;
	85	int i;
	86	for (i=0; i<cnt; i++) {
	87	uint8_t t, v = src[i];
	88	t = (((v + 0x45) ^ 0x38) + 0xb0) ^ 0x5a ^ state1;
	89	t = (((t + 0x39) ^ 0x35) + 0x05) ^ 0x2b ^ state2;
	90	dest[i] = state1 = t;
	91	state2 = v;
	92	}
	93	}
	94
	95	static int do_ep1_command(const struct sr_dev_inst *sdi,
	96	const uint8_t *command, uint8_t cmd_len,
	97	uint8_t *reply, uint8_t reply_len)
	98	{
	99	uint8_t buf[64];
	100	struct sr_usb_dev_inst *usb;
	101	int ret, xfer;
	102
	103	usb = sdi->conn;
	104
	105	if (cmd_len < 1 \|\| cmd_len > 64 \|\| reply_len > 64 \|\|
	106	command == NULL \|\| (reply_len > 0 && reply == NULL))
	107	return SR_ERR_ARG;
	108
	109	encrypt(buf, command, cmd_len);
	110
	111	ret = libusb_bulk_transfer(usb->devhdl, 1, buf, cmd_len, &xfer, 1000);
	112	if (ret != 0) {
	113	sr_dbg("Failed to send EP1 command 0x%02x: %s",
	114	command[0], libusb_error_name(ret));
	115	return SR_ERR;
	116	}
	117	if (xfer != cmd_len) {
	118	sr_dbg("Failed to send EP1 command 0x%02x: incorrect length %d != %d",
	119	xfer, cmd_len);
	120	return SR_ERR;
	121	}
	122
	123	if (reply_len == 0)
	124	return SR_OK;
	125
	126	ret = libusb_bulk_transfer(usb->devhdl, 0x80 \| 1, buf, reply_len, &xfer, 1000);
	127	if (ret != 0) {
	128	sr_dbg("Failed to receive reply to EP1 command 0x%02x: %s",
	129	command[0], libusb_error_name(ret));
	130	return SR_ERR;
131	}
132	if (xfer != reply_len) {
133	sr_dbg("Failed to receive reply to EP1 command 0x%02x: incorrect length %d != %d",
134	xfer, reply_len);
135	return SR_ERR;
136	}
137
138	decrypt(reply, buf, reply_len);
139
140	return SR_OK;
141	}
142
143	static int read_eeprom(const struct sr_dev_inst *sdi,
144	uint8_t address, uint8_t length, uint8_t *buf)
145	{
146	uint8_t command[5] = {
147	COMMAND_READ_EEPROM,
148	READ_EEPROM_COOKIE1,
149	READ_EEPROM_COOKIE2,
150	address,
151	length,
152	};
153
154	return do_ep1_command(sdi, command, 5, buf, length);
155	}
156
157	static int upload_led_table(const struct sr_dev_inst *sdi,
158	const uint8_t *table, uint8_t offset, uint8_t cnt)
159	{
160	uint8_t command[64];
161	int ret;
162
163	if (cnt < 1 \|\| cnt+offset > 64 \|\| table == NULL)
164	return SR_ERR_ARG;
165
166	while (cnt > 0) {
167	uint8_t chunk = (cnt > 32? 32 : cnt);
168
169	command[0] = COMMAND_WRITE_LED_TABLE;
170	command[1] = offset;
171	command[2] = chunk;
172	memcpy(command+3, table, chunk);
173
174	if ((ret = do_ep1_command(sdi, command, 3+chunk, NULL, 0)) != SR_OK)
175	return ret;
176
177	table += chunk;
178	offset += chunk;
179	cnt -= chunk;
180	}
181
182	return SR_OK;
183	}
184
185	static int set_led_mode(const struct sr_dev_inst *sdi,
186	uint8_t animate, uint16_t t2reload, uint8_t div,
187	uint8_t repeat)
188	{
189	uint8_t command[6] = {
190	COMMAND_SET_LED_MODE,
191	animate,
192	t2reload&0xff,
193	t2reload>>8,
194	div,
195	repeat,
196	};
197
198	return do_ep1_command(sdi, command, 6, NULL, 0);
199	}
200
201	static int read_fpga_register(const struct sr_dev_inst *sdi,
202	uint8_t address, uint8_t *value)
203	{
204	uint8_t command[3] = {
205	COMMAND_FPGA_READ_REGISTER,
206	1,
207	address,
208	};
209
210	return do_ep1_command(sdi, command, 3, value, 1);
211	}
212
213	static int write_fpga_registers(const struct sr_dev_inst *sdi,
214	uint8_t (*regs)[2], uint8_t cnt)
215	{
216	uint8_t command[64];
217	int i;
218
219	if (cnt < 1 \|\| cnt > 31)
220	return SR_ERR_ARG;
221
222	command[0] = COMMAND_FPGA_WRITE_REGISTER;
223	command[1] = cnt;
224	for (i=0; i<cnt; i++) {
225	command[2+2*i] = regs[i][0];
226	command[3+2*i] = regs[i][1];
227	}
228
229	return do_ep1_command(sdi, command, 2*(cnt+1), NULL, 0);
230	}
231
232	static int write_fpga_register(const struct sr_dev_inst *sdi,
233	uint8_t address, uint8_t value)
234	{
235	uint8_t regs[2] = { address, value };
236	return write_fpga_registers(sdi, &regs, 1);
237	}
238
239
240	static uint8_t map_eeprom_data(uint8_t v)
241	{
242	/* ??? */
243	switch (v) {
244	case 0x00: return 0x7a;
245	case 0x01: return 0x79;
246	case 0x05: return 0x85;
247	case 0x10: return 0x6a;
248	case 0x11: return 0x69;
249	case 0x14: return 0x76;
250	case 0x15: return 0x75;
251	case 0x41: return 0x39;
252	case 0x50: return 0x2a;
253	case 0x51: return 0x29;
254	case 0x55: return 0x35;
255	default:
256	sr_err("No mapping of 0x%02x defined", v);
257	return 0xff;
258	}
259	}
260
261	static int prime_fpga(const struct sr_dev_inst *sdi)
262	{
263	uint8_t eeprom_data[16];
264	uint8_t old_reg_10, status;
265	uint8_t regs[8][2] = {
266	{10, 0x00},
267	{10, 0x40},
268	{12, 0},
269	{10, 0xc0},
270	{10, 0x40},
271	{ 6, 0},
272	{ 7, 1},
273	{ 7, 0}
274	};
275	int i, ret;
276
277	if ((ret = read_eeprom(sdi, 16, 16, eeprom_data)) != SR_OK)
278	return ret;
279
280	if ((ret = read_fpga_register(sdi, 10, &old_reg_10)) != SR_OK)
281	return ret;
282
283	for (i=0; i<16; i++) {
284	regs[2][1] = eeprom_data[i];
285	regs[5][1] = map_eeprom_data(eeprom_data[i]);
286	if (i)
287	ret = write_fpga_registers(sdi, &regs[2], 6);
288	else
289	ret = write_fpga_registers(sdi, &regs[0], 8);
290	if (ret != SR_OK)
291	return ret;
292	}
293
294	if ((ret = write_fpga_register(sdi, 10, old_reg_10)) != SR_OK)
295	return ret;
296
297	if ((ret = read_fpga_register(sdi, 0, &status)) != SR_OK)
298	return ret;
299
300	if (status != 0x10) {
301	sr_err("Invalid FPGA status: 0x%02x != 0x10", status);
302	return SR_ERR;
303	}
304
305	return SR_OK;
306	}
307
308	static void make_heartbeat(uint8_t *table, int len)
309	{
310	int i, j;
311
312	memset(table, 0, len);
313	len >>= 3;
314	for (i=0; i<2; i++)
315	for (j=0; j<len; j++)
316	table++ = sin(jM_PI/len)*255;
317	}
318
319	static int configure_led(const struct sr_dev_inst *sdi)
320	{
321	uint8_t table[64];
322	int ret;
323
324	make_heartbeat(table, 64);
325	if ((ret = upload_led_table(sdi, table, 0, 64)) != SR_OK)
326	return ret;
327
328	return set_led_mode(sdi, 1, 6250, 0, 1);
329	}
330
331	static int upload_fpga_bitstream(const struct sr_dev_inst *sdi,
332	enum voltage_range vrange)
333	{
334	struct dev_context *devc;
335	int offset, chunksize, ret;
336	const char *filename;
337	FILE *fw;
338	unsigned char buf[256*62];
339
340	devc = sdi->priv;
341
342	if (devc->cur_voltage_range == vrange)
343	return SR_OK;
344
345	switch (vrange) {
346	case VOLTAGE_RANGE_18_33_V:
347	filename = FPGA_FIRMWARE_18;
348	break;
349	case VOLTAGE_RANGE_5_V:
350	filename = FPGA_FIRMWARE_33;
351	break;
352	default:
353	sr_err("Unsupported voltage range");
354	return SR_ERR;
355	}
356
357	sr_info("Uploading FPGA bitstream at %s", filename);
358	if ((fw = g_fopen(filename, "rb")) == NULL) {
359	sr_err("Unable to open bitstream file %s for reading: %s",
360	filename, strerror(errno));
361	return SR_ERR;
362	}
363
364	buf[0] = COMMAND_FPGA_UPLOAD_INIT;
365	if ((ret = do_ep1_command(sdi, buf, 1, NULL, 0)) != SR_OK) {
366	fclose(fw);
367	return ret;
368	}
369
370	while (1) {
371	chunksize = fread(buf, 1, sizeof(buf), fw);
372	if (chunksize == 0)
373	break;
374
375	for (offset = 0; offset < chunksize; offset += 62) {
376	uint8_t command[64];
377	uint8_t len = (offset + 62 > chunksize?
378	chunksize - offset : 62);
379	command[0] = COMMAND_FPGA_UPLOAD_SEND_DATA;
380	command[1] = len;
381	memcpy(command+2, buf+offset, len);
382	if ((ret = do_ep1_command(sdi, command, len+2, NULL, 0)) != SR_OK) {
383	fclose(fw);
384	return ret;
385	}
386	}
387
388	sr_info("Uploaded %d bytes", chunksize);
389	}
390	fclose(fw);
391	sr_info("FPGA bitstream upload done");
392
393	if ((ret = prime_fpga(sdi)) != SR_OK)
394	return ret;
395
396	if ((ret = configure_led(sdi)) != SR_OK)
397	return ret;
398
15abcf0f MC	399	devc->cur_voltage_range = vrange;
	400	return SR_OK;
	401	}
	402
7b5daad4	403	static int abort_acquisition_sync(const struct sr_dev_inst *sdi)
15abcf0f MC	404	{
	405	static const uint8_t command[2] = {
	406	COMMAND_ABORT_ACQUISITION_SYNC,
	407	ABORT_ACQUISITION_SYNC_PATTERN,
	408	};
	409	uint8_t reply, expected_reply;
	410	int ret;
	411
	412	if ((ret = do_ep1_command(sdi, command, 2, &reply, 1)) != SR_OK)
	413	return ret;
	414
	415	expected_reply = ~command[1];
	416	if (reply != expected_reply) {
	417	sr_err("Invalid response for abort acquisition command: "
	418	"0x%02x != 0x%02x", reply, expected_reply);
	419	return SR_ERR;
	420	}
	421
	422	return SR_OK;
	423	}
	424
7b5daad4 MC	425	SR_PRIV int saleae_logic16_setup_acquisition(const struct sr_dev_inst *sdi,
	426	uint64_t samplerate,
	427	uint16_t channels)
	428	{
	429	uint8_t clock_select, reg1, reg10;
	430	uint64_t div;
	431	int i, ret, nchan = 0;
	432
	433	if (samplerate == 0 \|\| samplerate > MAX_SAMPLE_RATE) {
	434	sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
	435	return SR_ERR;
	436	}
	437
	438	if (BASE_CLOCK_0_FREQ % samplerate == 0 &&
	439	(div = BASE_CLOCK_0_FREQ / samplerate) <= 256) {
	440	clock_select = 0;
	441	} else if (BASE_CLOCK_1_FREQ % samplerate == 0 &&
	442	(div = BASE_CLOCK_1_FREQ / samplerate) <= 256) {
	443	clock_select = 1;
	444	} else {
	445	sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
	446	return SR_ERR;
	447	}
	448
	449	for (i=0; i<16; i++)
	450	if (channels & (1U<<i))
	451	nchan++;
	452
	453	if ((nchan >= 13 && samplerate > MAX_13CH_SAMPLE_RATE) \|\|
	454	(nchan >= 10 && samplerate > MAX_10CH_SAMPLE_RATE) \|\|
	455	(nchan >= 8 && samplerate > MAX_8CH_SAMPLE_RATE) \|\|
	456	(nchan >= 7 && samplerate > MAX_7CH_SAMPLE_RATE) \|\|
	457	(nchan >= 4 && samplerate > MAX_4CH_SAMPLE_RATE)) {
	458	sr_err("Unable to sample at %" PRIu64 "Hz "
	459	"with this many channels.", samplerate);
	460	return SR_ERR;
	461	}
	462
	463	if ((ret = read_fpga_register(sdi, 1, &reg1)) != SR_OK)
	464	return ret;
	465
	466	if (reg1 != 0x08) {
	467	sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x08", reg1);
	468	return SR_ERR;
	469	}
	470
	471	if ((ret = write_fpga_register(sdi, 1, 0x40)) != SR_OK)
	472	return ret;
	473
	474	if ((ret = write_fpga_register(sdi, 10, clock_select)) != SR_OK)
	475	return ret;
	476
	477	if ((ret = write_fpga_register(sdi, 4, (uint8_t)(div-1))) != SR_OK)
	478	return ret;
	479
	480	if ((ret = write_fpga_register(sdi, 2, (uint8_t)(channels & 0xff))) != SR_OK)
	481	return ret;
	482
	483	if ((ret = write_fpga_register(sdi, 3, (uint8_t)(channels >> 8))) != SR_OK)
	484	return ret;
	485
	486	if ((ret = write_fpga_register(sdi, 1, 0x42)) != SR_OK)
	487	return ret;
	488
489	if ((ret = write_fpga_register(sdi, 1, 0x40)) != SR_OK)
490	return ret;
491
492	if ((ret = read_fpga_register(sdi, 1, &reg1)) != SR_OK)
493	return ret;
494
495	if (reg1 != 0x48) {
496	sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x48", reg1);
497	return SR_ERR;
498	}
499
500	if ((ret = read_fpga_register(sdi, 10, &reg10)) != SR_OK)
501	return ret;
502
503	if (reg10 != clock_select) {
504	sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x%02x",
505	reg10, (unsigned)clock_select);
506	return SR_ERR;
507	}
508
509	return SR_OK;
510	}
511
512	SR_PRIV int saleae_logic16_start_acquisition(const struct sr_dev_inst *sdi)
513	{
514	static const uint8_t command[1] = {
515	COMMAND_START_ACQUISITION,
516	};
517	int ret;
518
519	if ((ret = do_ep1_command(sdi, command, 1, NULL, 0)) != SR_OK)
520	return ret;
521
522	return write_fpga_register(sdi, 1, 0x41);
523	}
524
525	SR_PRIV int saleae_logic16_abort_acquisition(const struct sr_dev_inst *sdi)
526	{
527	static const uint8_t command[1] = {
528	COMMAND_ABORT_ACQUISITION_ASYNC,
529	};
530	int ret;
531	uint8_t reg1, reg8, reg9;
532
533	if ((ret = do_ep1_command(sdi, command, 1, NULL, 0)) != SR_OK)
534	return ret;
535
536	if ((ret = write_fpga_register(sdi, 1, 0x00)) != SR_OK)
537	return ret;
538
539	if ((ret = read_fpga_register(sdi, 1, &reg1)) != SR_OK)
540	return ret;
541
542	if (reg1 != 0x08) {
543	sr_dbg("Invalid state at acquisition stop: 0x%02x != 0x08", reg1);
544	return SR_ERR;
545	}
546
547	if ((ret = read_fpga_register(sdi, 8, &reg8)) != SR_OK)
548	return ret;
549
550	if ((ret = read_fpga_register(sdi, 9, &reg9)) != SR_OK)
551	return ret;
552
553	return SR_OK;
554	}
555
15abcf0f MC	556	SR_PRIV int saleae_logic16_init_device(const struct sr_dev_inst *sdi)
	557	{
	558	struct dev_context *devc;
	559	int ret;
	560
	561	devc = sdi->priv;
	562
	563	devc->cur_voltage_range = VOLTAGE_RANGE_UNKNOWN;
	564
7b5daad4	565	if ((ret = abort_acquisition_sync(sdi)) != SR_OK)
15abcf0f MC	566	return ret;
	567
	568	if ((ret = read_eeprom(sdi, 8, 8, devc->eeprom_data)) != SR_OK)
	569	return ret;
	570
	571	if ((ret = upload_fpga_bitstream(sdi, VOLTAGE_RANGE_18_33_V)) != SR_OK)
	572	return ret;
	573
	574	return SR_OK;
	575	}
	576
7b5daad4 MC	577	static void finish_acquisition(struct dev_context *devc)
	578	{
	579	struct sr_datafeed_packet packet;
	580	int i;
	581
	582	/* Terminate session. */
	583	packet.type = SR_DF_END;
	584	sr_session_send(devc->cb_data, &packet);
	585
	586	/* Remove fds from polling. */
	587	if (devc->usbfd != NULL) {
	588	for (i = 0; devc->usbfd[i] != -1; i++)
	589	sr_source_remove(devc->usbfd[i]);
	590	g_free(devc->usbfd);
	591	}
	592
	593	devc->num_transfers = 0;
	594	g_free(devc->transfers);
	595	g_free(devc->convbuffer);
	596	}
	597
	598	static void free_transfer(struct libusb_transfer *transfer)
	599	{
	600	struct dev_context *devc;
	601	unsigned int i;
	602
	603	devc = transfer->user_data;
	604
	605	g_free(transfer->buffer);
	606	transfer->buffer = NULL;
	607	libusb_free_transfer(transfer);
	608
	609	for (i = 0; i < devc->num_transfers; i++) {
	610	if (devc->transfers[i] == transfer) {
	611	devc->transfers[i] = NULL;
	612	break;
	613	}
	614	}
	615
	616	devc->submitted_transfers--;
	617	if (devc->submitted_transfers == 0)
	618	finish_acquisition(devc);
	619	}
	620
	621	static void resubmit_transfer(struct libusb_transfer *transfer)
	622	{
	623	int ret;
	624
	625	if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
	626	return;
	627
	628	free_transfer(transfer);
	629	/* TODO: Stop session? */
	630
	631	sr_err("%s: %s", __func__, libusb_error_name(ret));
	632	}
	633
	634	static size_t convert_sample_data(struct dev_context *devc,
	635	uint8_t *dest, size_t destcnt,
	636	const uint8_t *src, size_t srccnt)
c463dcf0	637	{
7b5daad4 MC	638	uint16_t *channel_data;
	639	int i, cur_channel;
	640	size_t ret = 0;
	641
	642	srccnt /= 2;
	643
	644	channel_data = devc->channel_data;
	645	cur_channel = devc->cur_channel;
	646
	647	while(srccnt--) {
	648	uint16_t sample, channel_mask;
	649
	650	sample = src[0] \| (src[1] << 8);
	651	src += 2;
	652
	653	channel_mask = devc->channel_masks[cur_channel];
	654
	655	for (i=15; i>=0; --i, sample >>= 1)
	656	if (sample & 1)
	657	channel_data[i] \|= channel_mask;
	658
	659	if (++cur_channel == devc->num_channels) {
	660	cur_channel = 0;
	661	if (destcnt < 16*2) {
	662	sr_err("Conversion buffer too small!");
	663	break;
	664	}
	665	memcpy(dest, channel_data, 16*2);
	666	memset(channel_data, 0, 16*2);
	667	dest += 16*2;
	668	ret += 16*2;
	669	destcnt -= 16*2;
	670	}
	671	}
	672
	673	devc->cur_channel = cur_channel;
c463dcf0	674
7b5daad4 MC	675	return ret;
	676	}
	677
	678	SR_PRIV void saleae_logic16_receive_transfer(struct libusb_transfer *transfer)
	679	{
	680	gboolean packet_has_error = FALSE;
	681	struct sr_datafeed_packet packet;
	682	struct sr_datafeed_logic logic;
c463dcf0	683	struct dev_context *devc;
7b5daad4 MC	684	size_t converted_length;
	685
	686	devc = transfer->user_data;
	687
	688	/*
	689	* If acquisition has already ended, just free any queued up
	690	* transfer that come in.
	691	*/
	692	if (devc->num_samples < 0) {
	693	free_transfer(transfer);
	694	return;
	695	}
	696
	697	sr_info("receive_transfer(): status %d received %d bytes.",
	698	transfer->status, transfer->actual_length);
	699
	700	switch (transfer->status) {
	701	case LIBUSB_TRANSFER_NO_DEVICE:
	702	devc->num_samples = -2;
	703	free_transfer(transfer);
	704	return;
	705	case LIBUSB_TRANSFER_COMPLETED:
	706	case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
	707	break;
	708	default:
	709	packet_has_error = TRUE;
	710	break;
	711	}
c463dcf0	712
7b5daad4 MC	713	if (transfer->actual_length & 1) {
	714	sr_err("Got an odd number of bytes from the device. This should not happen.");
	715	/* Bail out right away */
	716	packet_has_error = TRUE;
	717	devc->empty_transfer_count = MAX_EMPTY_TRANSFERS;
	718	}
c463dcf0	719
7b5daad4 MC	720	if (transfer->actual_length == 0 \|\| packet_has_error) {
	721	devc->empty_transfer_count++;
	722	if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
	723	/*
	724	* The FX2 gave up. End the acquisition, the frontend
	725	* will work out that the samplecount is short.
	726	*/
	727	devc->num_samples = -2;
	728	free_transfer(transfer);
	729	} else {
	730	resubmit_transfer(transfer);
	731	}
	732	return;
	733	} else {
	734	devc->empty_transfer_count = 0;
	735	}
c463dcf0	736
7b5daad4 MC	737	converted_length =
	738	convert_sample_data(devc,
	739	devc->convbuffer, devc->convbuffer_size,
	740	transfer->buffer, transfer->actual_length);
	741
	742	if (converted_length > 0) {
	743	/* Send the incoming transfer to the session bus. */
	744	packet.type = SR_DF_LOGIC;
	745	packet.payload = &logic;
	746	logic.length = converted_length;
	747	logic.unitsize = 2;
	748	logic.data = devc->convbuffer;
	749	sr_session_send(devc->cb_data, &packet);
	750
	751	devc->num_samples += converted_length / 2;
	752	if (devc->limit_samples &&
	753	(uint64_t)devc->num_samples > devc->limit_samples) {
	754	devc->num_samples = -2;
	755	free_transfer(transfer);
	756	return;
	757	}
c463dcf0 MC	758	}
c463dcf0 MC	759
7b5daad4	760	resubmit_transfer(transfer);
c463dcf0	761	}