]> sigrok.org Git - libsigrok.git/blame - hardware/saleae-logic/saleae-logic.h
sr: adjust copyright year
[libsigrok.git] / hardware / saleae-logic / saleae-logic.h
CommitLineData
6d754b6d
BV
1/*
2 * This file is part of the sigrok project.
3 *
c73d2ea4 4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
6d754b6d
BV
5 *
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
18 */
19
0f8522bf
UH
20#ifndef LIBSIGROK_HARDWARE_SALEAE_LOGIC_SALEAE_LOGIC_H
21#define LIBSIGROK_HARDWARE_SALEAE_LOGIC_SALEAE_LOGIC_H
6d754b6d
BV
22
23#define USB_INTERFACE 0
24#define USB_CONFIGURATION 1
25#define NUM_TRIGGER_STAGES 4
26#define TRIGGER_TYPES "01"
27#define FIRMWARE FIRMWARE_DIR "/saleae-logic.fw"
28#define GTV_TO_MSEC(gtv) (gtv.tv_sec * 1000 + gtv.tv_usec / 1000)
29
30/* delay in ms */
31#define MAX_RENUM_DELAY 3000
32#define NUM_SIMUL_TRANSFERS 10
33#define MAX_EMPTY_TRANSFERS (NUM_SIMUL_TRANSFERS * 2)
34
35/* Software trigger implementation: positive values indicate trigger stage. */
36#define TRIGGER_FIRED -1
37
38struct fx2_profile {
39 /* VID/PID when first found */
40 uint16_t orig_vid;
41 uint16_t orig_pid;
42 /* VID/PID after firmware upload */
43 uint16_t fw_vid;
44 uint16_t fw_pid;
45 char *vendor;
46 char *model;
47 char *model_version;
48 int num_probes;
49};
50
51struct fx2_device {
52 struct fx2_profile *profile;
53 /*
54 * Since we can't keep track of a Saleae Logic device after upgrading the
55 * firmware (it re-enumerates into a different device address after the
56 * upgrade) this is like a global lock. No device will open until a proper
57 * delay after the last device was upgraded.
58 */
59 GTimeVal fw_updated;
60 /* device/capture settings */
61 uint64_t cur_samplerate;
62 uint64_t limit_samples;
63 uint8_t probe_mask;
64 uint8_t trigger_mask[NUM_TRIGGER_STAGES];
65 uint8_t trigger_value[NUM_TRIGGER_STAGES];
66 int trigger_stage;
67 uint8_t trigger_buffer[NUM_TRIGGER_STAGES];
68 /*
69 * opaque session data passed in by the frontend, will be passed back
70 * on the session bus along with samples.
71 */
72 void *session_data;
69890f73
UH
73
74 struct sr_usb_device_instance *usb;
6d754b6d
BV
75};
76
0f8522bf 77#endif