* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <config.h>
-#include "libserialport.h"
#include "libserialport_internal.h"
static const struct std_baudrate std_baudrates[] = {
#ifndef NO_PORT_METADATA
enum sp_return ret;
#endif
- int len;
+ size_t len;
TRACE("%s, %p", portname, port_ptr);
{
TRACE("%p", port);
- if (!port)
- RETURN_ERROR(SP_ERR_ARG, "Null port");
-
- RETURN_INT(port->transport);
+ RETURN_INT(port ? port->transport : SP_TRANSPORT_NATIVE);
}
SP_API enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port,
const char *portname)
{
void *tmp;
- unsigned int count;
+ size_t count;
for (count = 0; list[count]; count++)
;
if (flags & SP_MODE_WRITE)
desired_access |= GENERIC_WRITE;
- port->hdl = CreateFile(escaped_port_name, desired_access, 0, 0,
+ port->hdl = CreateFileA(escaped_port_name, desired_access, 0, 0,
OPEN_EXISTING, flags_and_attributes, 0);
free(escaped_port_name);
if ((port->fd = open(port->name, flags_local)) < 0)
RETURN_FAIL("open() failed");
+
+ /*
+ * On POSIX in the default case the file descriptor of a serial port
+ * is not opened exclusively. Therefore the settings of a port are
+ * overwritten if the serial port is opened a second time. Windows
+ * opens all serial ports exclusively.
+ * So the idea is to open the serial ports alike in the exclusive mode.
+ *
+ * ioctl(*, TIOCEXCL) defines the file descriptor as exclusive. So all
+ * further open calls on the serial port will fail.
+ *
+ * There is a race condition if two processes open the same serial
+ * port. None of the processes will notice the exclusive ownership of
+ * the other process because ioctl() doesn't return an error code if
+ * the file descriptor is already marked as exclusive.
+ * This can be solved with flock(). It returns an error if the file
+ * descriptor is already locked by another process.
+ */
+#ifdef HAVE_FLOCK
+ if (flock(port->fd, LOCK_EX | LOCK_NB) < 0)
+ RETURN_FAIL("flock() failed");
+#endif
+
+#ifdef TIOCEXCL
+ /*
+ * Before Linux 3.8 ioctl(*, TIOCEXCL) was not implemented and could
+ * lead to EINVAL or ENOTTY.
+ * These errors aren't fatal and can be ignored.
+ */
+ if (ioctl(port->fd, TIOCEXCL) < 0 && errno != EINVAL && errno != ENOTTY)
+ RETURN_FAIL("ioctl() failed");
+#endif
+
#endif
ret = get_config(port, &data, &config);
RETURN_CODEVAL(ret);
}
+ /*
+ * Assume a default baudrate if the OS does not provide one.
+ * Cannot assign -1 here since Windows holds the baudrate in
+ * the DCB and does not configure the rate individually.
+ */
+ if (config.baudrate == 0) {
+ config.baudrate = 9600;
+ }
+
/* Set sane port settings. */
#ifdef _WIN32
data.dcb.fBinary = TRUE;
data.term.c_cc[VTIME] = 0;
/* Ignore modem status lines; enable receiver; leave control lines alone on close. */
- data.term.c_cflag |= (CLOCAL | CREAD | HUPCL);
+ data.term.c_cflag |= (CLOCAL | CREAD);
+ data.term.c_cflag &= ~(HUPCL);
#endif
#ifdef _WIN32
RETURN_INT(0);
#ifdef _WIN32
- DWORD bytes_written = 0;
+ DWORD remaining_ms, write_size, bytes_written;
+ size_t remaining_bytes, total_bytes_written = 0;
+ const uint8_t *write_ptr = (uint8_t *) buf;
+ bool result;
+ struct timeout timeout;
+
+ timeout_start(&timeout, timeout_ms);
TRY(await_write_completion(port));
- /* Set timeout. */
- if (port->timeouts.WriteTotalTimeoutConstant != timeout_ms) {
- port->timeouts.WriteTotalTimeoutConstant = timeout_ms;
- if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
- RETURN_FAIL("SetCommTimeouts() failed");
- }
+ while (total_bytes_written < count) {
- /* Reduce count if it exceeds the WriteFile limit. */
- if (count > WRITEFILE_MAX_SIZE)
- count = WRITEFILE_MAX_SIZE;
+ if (timeout_check(&timeout))
+ break;
- /* Start write. */
- if (WriteFile(port->hdl, buf, count, NULL, &port->write_ovl)) {
- DEBUG("Write completed immediately");
- RETURN_INT(count);
- } else if (GetLastError() == ERROR_IO_PENDING) {
- DEBUG("Waiting for write to complete");
- if (GetOverlappedResult(port->hdl, &port->write_ovl, &bytes_written, TRUE) == 0) {
- if (GetLastError() == ERROR_SEM_TIMEOUT) {
- DEBUG("Write timed out");
- RETURN_INT(0);
- } else {
- RETURN_FAIL("GetOverlappedResult() failed");
+ remaining_ms = timeout_remaining_ms(&timeout);
+
+ if (port->timeouts.WriteTotalTimeoutConstant != remaining_ms) {
+ port->timeouts.WriteTotalTimeoutConstant = remaining_ms;
+ if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
+ RETURN_FAIL("SetCommTimeouts() failed");
+ }
+
+ /* Reduce write size if it exceeds the WriteFile limit. */
+ remaining_bytes = count - total_bytes_written;
+ if (remaining_bytes > WRITEFILE_MAX_SIZE)
+ write_size = WRITEFILE_MAX_SIZE;
+ else
+ write_size = (DWORD) remaining_bytes;
+
+ /* Start write. */
+
+ result = WriteFile(port->hdl, write_ptr, write_size, NULL, &port->write_ovl);
+
+ timeout_update(&timeout);
+
+ if (result) {
+ DEBUG("Write completed immediately");
+ bytes_written = write_size;
+ } else if (GetLastError() == ERROR_IO_PENDING) {
+ DEBUG("Waiting for write to complete");
+ if (GetOverlappedResult(port->hdl, &port->write_ovl, &bytes_written, TRUE) == 0) {
+ if (GetLastError() == ERROR_SEM_TIMEOUT) {
+ DEBUG("Write timed out");
+ break;
+ } else {
+ RETURN_FAIL("GetOverlappedResult() failed");
+ }
}
+ DEBUG_FMT("Write completed, %d/%d bytes written", bytes_written, write_size);
+ } else {
+ RETURN_FAIL("WriteFile() failed");
}
- DEBUG_FMT("Write completed, %d/%d bytes written", bytes_written, count);
- RETURN_INT(bytes_written);
- } else {
- RETURN_FAIL("WriteFile() failed");
+
+ write_ptr += bytes_written;
+ total_bytes_written += bytes_written;
}
+
+ RETURN_INT((int) total_bytes_written);
#else
size_t bytes_written = 0;
unsigned char *ptr = (unsigned char *) buf;
struct timeout timeout;
fd_set fds;
- int result;
+ ssize_t result;
timeout_start(&timeout, timeout_ms);
RETURN_INT(0);
#ifdef _WIN32
- DWORD buf_bytes;
+ size_t buf_bytes;
/* Check whether previous write is complete. */
if (port->writing) {
memcpy(port->write_buf, buf, buf_bytes);
/* Start asynchronous write. */
- if (WriteFile(port->hdl, port->write_buf, buf_bytes, NULL, &port->write_ovl) == 0) {
+ if (WriteFile(port->hdl, port->write_buf, (DWORD) buf_bytes, NULL, &port->write_ovl) == 0) {
if (GetLastError() == ERROR_IO_PENDING) {
if ((port->writing = !HasOverlappedIoCompleted(&port->write_ovl)))
DEBUG("Asynchronous write completed immediately");
DEBUG("All bytes written immediately");
- RETURN_INT(buf_bytes);
+ RETURN_INT((int) buf_bytes);
#else
/* Returns the number of bytes written, or -1 upon failure. */
ssize_t written = write(port->fd, buf, count);
RETURN_INT(0);
#ifdef _WIN32
- DWORD bytes_read = 0;
+ DWORD bytes_read;
/* Set timeout. */
if (port->timeouts.ReadIntervalTimeout != 0 ||
}
/* Start read. */
- if (ReadFile(port->hdl, buf, count, NULL, &port->read_ovl)) {
+ if (ReadFile(port->hdl, buf, (DWORD) count, NULL, &port->read_ovl)) {
DEBUG("Read completed immediately");
- bytes_read = count;
+ bytes_read = (DWORD) count;
} else if (GetLastError() == ERROR_IO_PENDING) {
DEBUG("Waiting for read to complete");
if (GetOverlappedResult(port->hdl, &port->read_ovl, &bytes_read, TRUE) == 0)
TRY(restart_wait_if_needed(port, bytes_read));
- RETURN_INT(bytes_read);
+ RETURN_INT((int) bytes_read);
#else
size_t bytes_read = 0;
unsigned char *ptr = (unsigned char *) buf;
struct timeout timeout;
fd_set fds;
- int result;
+ ssize_t result;
timeout_start(&timeout, timeout_ms);
/* Loop until we have at least one byte, or timeout is reached. */
while (bytes_read == 0) {
/* Start read. */
- if (ReadFile(port->hdl, buf, count, &bytes_read, &port->read_ovl)) {
+ if (ReadFile(port->hdl, buf, (DWORD) count, &bytes_read, &port->read_ovl)) {
DEBUG("Read completed immediately");
} else if (GetLastError() == ERROR_IO_PENDING) {
DEBUG("Waiting for read to complete");
size_t bytes_read = 0;
struct timeout timeout;
fd_set fds;
- int result;
+ ssize_t result;
timeout_start(&timeout, timeout_ms);
}
/* Do read. */
- if (ReadFile(port->hdl, buf, count, NULL, &port->read_ovl) == 0)
+ if (ReadFile(port->hdl, buf, (DWORD) count, NULL, &port->read_ovl) == 0)
if (GetLastError() != ERROR_IO_PENDING)
RETURN_FAIL("ReadFile() failed");
{
TRACE("%p", port);
+#ifdef __CYGWIN__
+ /* TIOCOUTQ is not defined in Cygwin headers */
+ RETURN_ERROR(SP_ERR_SUPP,
+ "Getting output bytes waiting is not supported on Cygwin");
+#else
CHECK_OPEN_PORT();
DEBUG_FMT("Checking output bytes waiting on port %s", port->name);
RETURN_FAIL("TIOCOUTQ ioctl failed");
RETURN_INT(bytes_waiting);
#endif
+#endif
}
SP_API enum sp_return sp_new_event_set(struct sp_event_set **result_ptr)
RETURN_OK();
#else
struct timeout timeout;
+ int poll_timeout;
int result;
struct pollfd *pollfds;
unsigned int i;
break;
}
- result = poll(pollfds, event_set->count, timeout_remaining_ms(&timeout) || -1);
+ poll_timeout = (int) timeout_remaining_ms(&timeout);
+ if (poll_timeout == 0)
+ poll_timeout = -1;
+
+ result = poll(pollfds, event_set->count, poll_timeout);
timeout_update(&timeout);
config->bits = data->dcb.ByteSize;
- if (data->dcb.fParity)
- switch (data->dcb.Parity) {
- case NOPARITY:
- config->parity = SP_PARITY_NONE;
- break;
- case ODDPARITY:
- config->parity = SP_PARITY_ODD;
- break;
- case EVENPARITY:
- config->parity = SP_PARITY_EVEN;
- break;
- case MARKPARITY:
- config->parity = SP_PARITY_MARK;
- break;
- case SPACEPARITY:
- config->parity = SP_PARITY_SPACE;
- break;
- default:
- config->parity = -1;
- }
- else
+ switch (data->dcb.Parity) {
+ case NOPARITY:
config->parity = SP_PARITY_NONE;
+ break;
+ case ODDPARITY:
+ config->parity = SP_PARITY_ODD;
+ break;
+ case EVENPARITY:
+ config->parity = SP_PARITY_EVEN;
+ break;
+ case MARKPARITY:
+ config->parity = SP_PARITY_MARK;
+ break;
+ case SPACEPARITY:
+ config->parity = SP_PARITY_SPACE;
+ break;
+ default:
+ config->parity = -1;
+ }
switch (data->dcb.StopBits) {
case ONESTOPBIT:
DEBUG_FMT("Setting configuration for port %s", port->name);
#ifdef _WIN32
+ BYTE* new_buf;
TRY(await_write_completion(port));
/* Allocate write buffer for 50ms of data at baud rate. */
port->write_buf_size = max(config->baudrate / (8 * 20), 1);
- port->write_buf = realloc(port->write_buf,
- port->write_buf_size);
-
- if (!port->write_buf)
+ new_buf = realloc(port->write_buf, port->write_buf_size);
+ if (!new_buf)
RETURN_ERROR(SP_ERR_MEM, "Allocating write buffer failed");
+ port->write_buf = new_buf;
}
if (config->bits >= 0)
TRACE_VOID();
#ifdef _WIN32
- TCHAR *message;
+ char *message;
DWORD error = GetLastError();
- DWORD length = FormatMessage(
+ DWORD length = FormatMessageA(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM |
FORMAT_MESSAGE_IGNORE_INSERTS,
NULL,
error,
MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
- (LPTSTR) &message,
+ (LPSTR) &message,
0, NULL );
if (length >= 2 && message[length - 2] == '\r')
projects / libserialport.git / blobdiff