+olimex_stm32-h103_idle.sr
+-------------------------
+
+The following OpenOCD command was used:
+
+ openocd -f interface/flossjtag-noeeprom.cfg -f board/olimex_stm32_h107.cfg \
+ -c "init" -c "reset halt"
+
+The sigrok command line used was:
+
+ sigrok-cli -d 0:samplerate=4mhz --time 3s \
+ -p '1=TRST,2=TDI,3=TMS,4=TCK,5=TDO,6=RST' -o <filename>
+
+sigrok-cli was only started a few seconds after the OpenOCD init/connection
+to capture what happens when the user doesn't actively use OpenOCD commands.
+