*
* @param serial Previously initialized serial port structure.
* @param[in] flags Flags to use when opening the serial port. Possible flags
- * include SERIAL_RDWR, SERIAL_RDONLY, SERIAL_NONBLOCK.
+ * include SERIAL_RDWR, SERIAL_RDONLY.
*
* If the serial structure contains a serialcomm string, it will be
* passed to serial_set_paramstr() after the port is opened.
else if (flags & SERIAL_RDONLY)
sp_flags = SP_MODE_READ;
- serial->nonblocking = (flags & SERIAL_NONBLOCK) ? 1 : 0;
-
ret = sp_open(serial->data, sp_flags);
switch (ret) {
}
static int _serial_write(struct sr_serial_dev_inst *serial,
- const void *buf, size_t count, int nonblocking)
+ const void *buf, size_t count, int nonblocking, unsigned int timeout_ms)
{
ssize_t ret;
char *error;
if (nonblocking)
ret = sp_nonblocking_write(serial->data, buf, count);
else
- ret = sp_blocking_write(serial->data, buf, count, 0);
+ ret = sp_blocking_write(serial->data, buf, count, timeout_ms);
switch (ret) {
case SP_ERR_ARG:
}
/**
- * Write a number of bytes to the specified serial port.
+ * Write a number of bytes to the specified serial port, blocking until finished.
*
* @param serial Previously initialized serial port structure.
* @param[in] buf Buffer containing the bytes to write.
* @param[in] count Number of bytes to write.
+ * @param[in] timeout_ms Timeout in ms, or 0 for no timeout.
*
* @retval SR_ERR_ARG Invalid argument.
* @retval SR_ERR Other error.
- * @retval other The number of bytes written.
- */
-SR_PRIV int serial_write(struct sr_serial_dev_inst *serial,
- const void *buf, size_t count)
-{
- return _serial_write(serial, buf, count, serial->nonblocking);
-}
-
-/**
- * Write a number of bytes to the specified serial port, blocking until finished.
- * @copydetails serial_write()
+ * @retval other The number of bytes written. If this is less than the number
+ * specified in the call, the timeout was reached.
*/
SR_PRIV int serial_write_blocking(struct sr_serial_dev_inst *serial,
- const void *buf, size_t count)
+ const void *buf, size_t count, unsigned int timeout_ms)
{
- return _serial_write(serial, buf, count, 0);
+ return _serial_write(serial, buf, count, 0, timeout_ms);
}
/**
* Write a number of bytes to the specified serial port, return immediately.
- * @copydetails serial_write()
+ *
+ * @param serial Previously initialized serial port structure.
+ * @param[in] buf Buffer containing the bytes to write.
+ * @param[in] count Number of bytes to write.
+ *
+ * @retval SR_ERR_ARG Invalid argument.
+ * @retval SR_ERR Other error.
+ * @retval other The number of bytes written.
*/
SR_PRIV int serial_write_nonblocking(struct sr_serial_dev_inst *serial,
const void *buf, size_t count)
{
- return _serial_write(serial, buf, count, 1);
+ return _serial_write(serial, buf, count, 1, 0);
}
static int _serial_read(struct sr_serial_dev_inst *serial, void *buf,
- size_t count, int nonblocking)
+ size_t count, int nonblocking, unsigned int timeout_ms)
{
ssize_t ret;
char *error;
if (nonblocking)
ret = sp_nonblocking_read(serial->data, buf, count);
else
- ret = sp_blocking_read(serial->data, buf, count, 0);
+ ret = sp_blocking_read(serial->data, buf, count, timeout_ms);
switch (ret) {
case SP_ERR_ARG:
}
/**
- * Read a number of bytes from the specified serial port.
+ * Read a number of bytes from the specified serial port, block until finished.
*
* @param serial Previously initialized serial port structure.
* @param buf Buffer where to store the bytes that are read.
* @param[in] count The number of bytes to read.
+ * @param[in] timeout_ms Timeout in ms, or 0 for no timeout.
*
* @retval SR_ERR_ARG Invalid argument.
* @retval SR_ERR Other error.
- * @retval other The number of bytes read.
- */
-SR_PRIV int serial_read(struct sr_serial_dev_inst *serial, void *buf,
- size_t count)
-{
- return _serial_read(serial, buf, count, serial->nonblocking);
-}
-
-/**
- * Read a number of bytes from the specified serial port, block until finished.
- * @copydetails serial_read()
+ * @retval other The number of bytes read. If this is less than the number
+ * requested, the timeout was reached.
*/
SR_PRIV int serial_read_blocking(struct sr_serial_dev_inst *serial, void *buf,
- size_t count)
+ size_t count, unsigned int timeout_ms)
{
- return _serial_read(serial, buf, count, 0);
+ return _serial_read(serial, buf, count, 0, timeout_ms);
}
/**
* Try to read up to @a count bytes from the specified serial port, return
* immediately with what's available.
- * @copydetails serial_read()
+ *
+ * @param serial Previously initialized serial port structure.
+ * @param buf Buffer where to store the bytes that are read.
+ * @param[in] count The number of bytes to read.
+ *
+ * @retval SR_ERR_ARG Invalid argument.
+ * @retval SR_ERR Other error.
+ * @retval other The number of bytes read.
*/
SR_PRIV int serial_read_nonblocking(struct sr_serial_dev_inst *serial, void *buf,
size_t count)
{
- return _serial_read(serial, buf, count, 1);
+ return _serial_read(serial, buf, count, 1, 0);
}
/**
SR_PRIV int serial_readline(struct sr_serial_dev_inst *serial, char **buf,
int *buflen, gint64 timeout_ms)
{
- gint64 start;
+ gint64 start, remaining;
int maxlen, len;
if (!serial) {
return -1;
}
- timeout_ms *= 1000;
start = g_get_monotonic_time();
+ remaining = timeout_ms;
maxlen = *buflen;
*buflen = len = 0;
len = maxlen - *buflen - 1;
if (len < 1)
break;
- len = serial_read(serial, *buf + *buflen, 1);
+ len = sp_blocking_read(serial->data, *buf + *buflen, 1, remaining);
if (len > 0) {
*buflen += len;
*(*buf + *buflen) = '\0';
break;
}
}
- if (g_get_monotonic_time() - start > timeout_ms)
+ /* Reduce timeout by time elapsed. */
+ remaining = timeout_ms - ((g_get_monotonic_time() - start) / 1000);
+ if (remaining <= 0)
/* Timeout */
break;
if (len < 1)
i = ibuf = len = 0;
while (ibuf < maxlen) {
- len = serial_read(serial, &buf[ibuf], 1);
+ len = serial_read_nonblocking(serial, &buf[ibuf], 1);
if (len > 0) {
ibuf += len;
} else if (len == 0) {
*/
SR_PRIV GSList *sr_serial_find_usb(uint16_t vendor_id, uint16_t product_id)
{
-#ifdef __linux__
- const gchar *usb_dev;
- const char device_tree[] = "/sys/bus/usb/devices/";
- GDir *devices_dir, *device_dir;
- GSList *l = NULL;
- GSList *tty_devs;
- GSList *matched_paths;
- FILE *fd;
- char tmp[5];
- gchar *vendor_path, *product_path, *path_copy;
- gchar *prefix, *subdir_path, *device_path, *tty_path;
- unsigned long read_vendor_id, read_product_id;
- const char *file;
-
- l = NULL;
- tty_devs = NULL;
- matched_paths = NULL;
-
- if (!(devices_dir = g_dir_open(device_tree, 0, NULL)))
- return NULL;
+ GSList *tty_devs = NULL;
+ struct sp_port **ports;
+ int i, vid, pid;
- /*
- * Find potential candidates using the vendor ID and product ID
- * and store them in matched_paths.
- */
- while ((usb_dev = g_dir_read_name(devices_dir))) {
- vendor_path = g_strconcat(device_tree,
- usb_dev, "/idVendor", NULL);
- product_path = g_strconcat(device_tree,
- usb_dev, "/idProduct", NULL);
-
- if (!g_file_test(vendor_path, G_FILE_TEST_EXISTS) ||
- !g_file_test(product_path, G_FILE_TEST_EXISTS))
- goto skip_device;
-
- if ((fd = g_fopen(vendor_path, "r")) == NULL)
- goto skip_device;
-
- if (fgets(tmp, sizeof(tmp), fd) == NULL) {
- fclose(fd);
- goto skip_device;
- }
- read_vendor_id = strtoul(tmp, NULL, 16);
-
- fclose(fd);
-
- if ((fd = g_fopen(product_path, "r")) == NULL)
- goto skip_device;
-
- if (fgets(tmp, sizeof(tmp), fd) == NULL) {
- fclose(fd);
- goto skip_device;
- }
- read_product_id = strtoul(tmp, NULL, 16);
-
- fclose(fd);
-
- if (vendor_id == read_vendor_id &&
- product_id == read_product_id) {
- path_copy = g_strdup(usb_dev);
- matched_paths = g_slist_prepend(matched_paths,
- path_copy);
- }
+ if (sp_list_ports(&ports) != SP_OK)
+ return NULL;
-skip_device:
- g_free(vendor_path);
- g_free(product_path);
- }
- g_dir_close(devices_dir);
+ for (i=0; ports[i]; i++)
+ if (sp_get_port_transport(ports[i]) == SP_TRANSPORT_USB &&
+ sp_get_port_usb_vid_pid(ports[i], &vid, &pid) == SP_OK &&
+ vid == vendor_id && pid == product_id)
+ tty_devs = g_slist_prepend(tty_devs,
+ g_strdup(sp_get_port_name(ports[i])));
- /* For every matched device try to find a ttyUSBX subfolder. */
- for (l = matched_paths; l; l = l->next) {
- subdir_path = NULL;
+ sp_free_port_list(ports);
+ return tty_devs;
+}
- device_path = g_strconcat(device_tree, l->data, NULL);
+SR_PRIV int serial_timeout(struct sr_serial_dev_inst *port, int num_bytes)
+{
+ struct sp_port_config *config;
+ int timeout_ms, bits, baud, tmp;
- if (!(device_dir = g_dir_open(device_path, 0, NULL))) {
- g_free(device_path);
- continue;
- }
+ /* Default to 1s. */
+ timeout_ms = 1000;
- prefix = g_strconcat(l->data, ":", NULL);
+ if (sp_new_config(&config) < 0)
+ return timeout_ms;
- while ((file = g_dir_read_name(device_dir))) {
- if (g_str_has_prefix(file, prefix)) {
- subdir_path = g_strconcat(device_path,
- "/", file, NULL);
- break;
- }
- }
- g_dir_close(device_dir);
+ bits = baud = 0;
+ do {
+ if (sp_get_config(port->data, config) < 0)
+ break;
- g_free(prefix);
- g_free(device_path);
+ /* Start bit. */
+ bits = 1;
+ if (sp_get_config_bits(config, &tmp) < 0)
+ break;
+ bits += tmp;
+ if (sp_get_config_stopbits(config, &tmp) < 0)
+ break;
+ bits += tmp;
+ if (sp_get_config_baudrate(config, &tmp) < 0)
+ break;
+ baud = tmp;
+ } while (FALSE);
- if (subdir_path) {
- if (!(device_dir = g_dir_open(subdir_path, 0, NULL))) {
- g_free(subdir_path);
- continue;
- }
- g_free(subdir_path);
-
- while ((file = g_dir_read_name(device_dir))) {
- if (g_str_has_prefix(file, "ttyUSB")) {
- tty_path = g_strconcat("/dev/",
- file, NULL);
- sr_dbg("Found USB device %04x:%04x attached to %s.",
- vendor_id, product_id, tty_path);
- tty_devs = g_slist_prepend(tty_devs,
- tty_path);
- break;
- }
- }
- g_dir_close(device_dir);
- }
+ if (bits && baud) {
+ /* Throw in 10ms for misc OS overhead. */
+ timeout_ms = 10;
+ timeout_ms += ((1000.0 / baud) * bits) * num_bytes;
}
- g_slist_free_full(matched_paths, g_free);
- return tty_devs;
-#else
- (void)vendor_id;
- (void)product_id;
+ sp_free_config(config);
- return NULL;
-#endif
+ return timeout_ms;
}
projects / libsigrok.git / blobdiff