drivers: Consistently use same indentation for config_*() API calls.

[libsigrok.git] / src / hardware / uni-t-dmm / protocol.c

diff --git a/src/hardware/uni-t-dmm/protocol.c b/src/hardware/uni-t-dmm/protocol.c
index 5503584e33bcfef256665212dc2c51aae9461ecc..111770838f077310559b8fbbbc765c995734d2c1 100644 (file)
--- a/src/hardware/uni-t-dmm/protocol.c
+++ b/src/hardware/uni-t-dmm/protocol.c
@@ -102,8 +102,7 @@ static int hid_chip_init(struct sr_dev_inst *sdi, uint16_t baudrate)
        struct sr_usb_dev_inst *usb;
 
        usb = sdi->conn;
-       
-       /* Detach kernel drivers which grabbed this device (if any). */
+
        if (libusb_kernel_driver_active(usb->devhdl, 0) == 1) {
                ret = libusb_detach_kernel_driver(usb->devhdl, 0);
                if (ret < 0) {
@@ -111,18 +110,13 @@ static int hid_chip_init(struct sr_dev_inst *sdi, uint16_t baudrate)
                               libusb_error_name(ret));
                        return SR_ERR;
                }
-               sr_dbg("Successfully detached kernel driver.");
-       } else {
-               sr_dbg("No need to detach a kernel driver.");
        }
 
-       /* Claim interface 0. */
        if ((ret = libusb_claim_interface(usb->devhdl, 0)) < 0) {
                sr_err("Failed to claim interface 0: %s.",
                       libusb_error_name(ret));
                return SR_ERR;
        }
-       sr_dbg("Successfully claimed interface 0.");
 
        /* Set data for the HID feature report (e.g. baudrate). */
        buf[0] = baudrate & 0xff;        /* Baudrate, LSB */
@@ -158,8 +152,6 @@ static int hid_chip_init(struct sr_dev_inst *sdi, uint16_t baudrate)
                return SR_ERR;
        }
 
-       sr_dbg("Successfully sent initial HID feature report.");
-
        return SR_OK;
 }
 
@@ -290,7 +282,7 @@ SR_PRIV int uni_t_dmm_receive_data(int fd, int revents, void *cb_data)
 
        /* Abort acquisition if we acquired enough samples. */
        if (sr_sw_limits_check(&devc->limits))
-               sdi->driver->dev_acquisition_stop(sdi);
+               sr_dev_acquisition_stop(sdi);
 
        return TRUE;
 }