Revert "hameg-hmo: Support BE format for SCPI sample downloads"

[libsigrok.git] / src / hardware / serial-dmm / api.c

diff --git a/src/hardware/serial-dmm/api.c b/src/hardware/serial-dmm/api.c
index aaf0066c75b2d339a769f68305d11588751d139a..a54fe03f7508b1d305b31769b34cfa5d1debc155 100644 (file)
--- a/src/hardware/serial-dmm/api.c
+++ b/src/hardware/serial-dmm/api.c
@@ -232,6 +232,13 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
         * Fold marks {{{ }}} with matching braces were added, to further
         * speed up navigation in the long list.
         */
+       /* asycii based meters {{{ */
+       DMM(
+               "metrix-mx56c", asycii, "Metrix", "MX56C",
+               "2400/8n1", 2400, ASYCII_PACKET_SIZE, 0, 0, NULL,
+               sr_asycii_packet_valid, sr_asycii_parse, NULL
+       ),
+       /* }}} */
        /* bm25x based meters {{{ */
        DMM(
                "brymen-bm25x", bm25x,
@@ -244,7 +251,7 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
        /* dtm0660 based meters {{{ */
        DMM(
                "peaktech-3415", dtm0660,
-               "Peaktech", "3415", "2400/8n1/rts=0/dtr=1",
+               "PeakTech", "3415", "2400/8n1/rts=0/dtr=1",
                2400, DTM0660_PACKET_SIZE, 0, 0, NULL,
                sr_dtm0660_packet_valid, sr_dtm0660_parse, NULL
        ),
@@ -263,16 +270,23 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
                sr_es519xx_2400_11b_packet_valid, sr_es519xx_2400_11b_parse,
                NULL
        ),
+       /*
+        * Note: ES51922 and ES51986 baudrate is actually 19230. This is
+        * "out" by .15%, and so is well within the typical 1% margin
+        * that is considered acceptable in UART communication, and thus
+        * should not cause an issue.
+        *
+        * However, using 19230 as baudrate here will not work, as most DMM
+        * cables do not support that baudrate!
+        */
        DMM(
                "tenma-72-7750-ser", es519xx,
-               /* Note: ES51986 baudrate is actually 19230! */
                "Tenma", "72-7750 (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
                19200, ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
                sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
                NULL
        ),
        DMM(
-               /* Note: ES51986 baudrate is actually 19230! */
                "uni-t-ut60g-ser", es519xx,
                "UNI-T", "UT60G (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
                19200, ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
@@ -281,7 +295,6 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
        ),
        DMM(
                "uni-t-ut61e-ser", es519xx,
-               /* Note: ES51922 baudrate is actually 19230! */
                "UNI-T", "UT61E (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
                19200, ES519XX_14B_PACKET_SIZE, 0, 0, NULL,
                sr_es519xx_19200_14b_packet_valid, sr_es519xx_19200_14b_parse,
@@ -312,7 +325,7 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
        ),
        DMM(
                "peaktech-3330", fs9721,
-               "Peaktech", "3330", "2400/8n1/dtr=1", 2400,
+               "PeakTech", "3330", "2400/8n1/dtr=1", 2400,
                FS9721_PACKET_SIZE, 0, 0, NULL,
                sr_fs9721_packet_valid, sr_fs9721_parse,
                sr_fs9721_01_10_temp_f_c
@@ -451,7 +464,7 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
        ),
        DMM(
                "peaktech-3410", metex14,
-               "Peaktech", "3410", "600/7n2/rts=0/dtr=1", 600,
+               "PeakTech", "3410", "600/7n2/rts=0/dtr=1", 600,
                METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
                sr_metex14_packet_valid, sr_metex14_parse,
                NULL