Build: Set local include directories in Makefile.am

[libsigrok.git] / src / hardware / scpi-pps / profiles.c

diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c
index e860e9de8cbb1bbc82f0d915af4271b646c8f2b6..c8c7e3720f0ba077730ca3391087411ff72e1a28 100644 (file)
--- a/src/hardware/scpi-pps/profiles.c
+++ b/src/hardware/scpi-pps/profiles.c
@@ -30,6 +30,7 @@ static const char *pps_vendors[][2] = {
        { "RIGOL TECHNOLOGIES", "Rigol" },
        { "HEWLETT-PACKARD", "HP" },
        { "PHILIPS", "Philips" },
+       { "CHROMA", "Chroma" },
        { "Chroma ATE", "Chroma" },
        { "Agilent Technologies", "Agilent" },
 };
@@ -57,10 +58,10 @@ static const uint32_t agilent_n5700a_devopts_cg[] = {
        SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
        SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
        SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
-       SR_CONF_OUTPUT_VOLTAGE | SR_CONF_GET,
-       SR_CONF_OUTPUT_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
-       SR_CONF_OUTPUT_CURRENT | SR_CONF_GET,
-       SR_CONF_OUTPUT_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_VOLTAGE | SR_CONF_GET,
+       SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_CURRENT | SR_CONF_GET,
+       SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 };
 
 static const struct channel_spec agilent_n5767a_ch[] = {
@@ -105,12 +106,12 @@ static const uint32_t chroma_61604_devopts[] = {
 static const uint32_t chroma_61604_devopts_cg[] = {
        SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
        SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
-       SR_CONF_OUTPUT_VOLTAGE | SR_CONF_GET,
-       SR_CONF_OUTPUT_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_VOLTAGE | SR_CONF_GET,
+       SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
        SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET,
        SR_CONF_OUTPUT_FREQUENCY_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
-       SR_CONF_OUTPUT_CURRENT | SR_CONF_GET,
-       SR_CONF_OUTPUT_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_CURRENT | SR_CONF_GET,
+       SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 };
 
 static const struct channel_spec chroma_61604_ch[] = {
@@ -142,6 +143,88 @@ static const struct scpi_command chroma_61604_cmd[] = {
        { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" },
 };
 
+/* Chroma 62000 series DC source */
+
+static const uint32_t chroma_62000_devopts[] = {
+       SR_CONF_CONTINUOUS | SR_CONF_SET,
+};
+
+static const uint32_t chroma_62000_devopts_cg[] = {
+       SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_VOLTAGE | SR_CONF_GET,
+       SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_CURRENT | SR_CONF_GET,
+       SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
+};
+
+static const struct channel_group_spec chroma_62000_cg[] = {
+       { "1", CH_IDX(0), PPS_OVP | PPS_OCP },
+};
+
+static const struct scpi_command chroma_62000_cmd[] = {
+       { SCPI_CMD_REMOTE, ":CONF:REM ON" },
+       { SCPI_CMD_LOCAL, ":CONF:REM OFF" },
+       { SCPI_CMD_BEEPER, ":CONF:BEEP?" },
+       { SCPI_CMD_BEEPER_ENABLE, ":CONF:BEEP ON" },
+       { SCPI_CMD_BEEPER_DISABLE, ":CONF:BEEP OFF" },
+       { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
+       { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
+       { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POW?" },
+       { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
+       { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" },
+       { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
+       { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
+       { SCPI_CMD_GET_OUTPUT_ENABLED, ":CONF:OUTP?" },
+       { SCPI_CMD_SET_OUTPUT_ENABLE, ":CONF:OUTP ON" },
+       { SCPI_CMD_SET_OUTPUT_DISABLE, ":CONF:OUTP OFF" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH?" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" },
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" },
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" },
+};
+
+static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi,
+               struct sr_scpi_hw_info *hw_info,
+               struct channel_spec **channels, unsigned int *num_channels,
+               struct channel_group_spec **channel_groups,
+               unsigned int *num_channel_groups)
+{
+       unsigned int volts, amps;
+       struct channel_spec *channel;
+
+       (void)sdi;
+
+       sscanf(hw_info->model, "%*[^P]P-%u-%u", &volts, &amps);
+       sr_dbg("Found device rated for %d V and %d A", volts, amps);
+
+       if (volts > 600) {
+               sr_err("Probed max voltage of %u V is out of spec.", volts);
+               return SR_ERR_BUG;
+       }
+
+       if (volts > 120) {
+               sr_err("Probed max current of %u A is out of spec.", amps);
+               return SR_ERR_BUG;
+       }
+
+       channel = g_malloc0(sizeof(struct channel_spec));
+       channel->name = "1";
+       channel->voltage[0] = channel->current[0] = 0.0;
+       channel->voltage[1] = (float)volts;
+       channel->current[1] = (float)amps;
+       channel->voltage[2] = channel->current[2] = 0.01;
+       *channels = channel;
+       *num_channels = 1;
+
+       *channel_groups = g_malloc(sizeof(struct channel_group_spec));
+       **channel_groups = chroma_62000_cg[0];
+       *num_channel_groups = 1;
+
+       return SR_OK;
+}
+
 /* Rigol DP800 series */
 static const uint32_t rigol_dp800_devopts[] = {
        SR_CONF_CONTINUOUS | SR_CONF_SET,
@@ -421,6 +504,15 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
                ARRAY_AND_SIZE(chroma_61604_cmd),
                .probe_channels = NULL,
        },
+       /* Chroma 62000 series */
+       { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", 0,
+               ARRAY_AND_SIZE(chroma_62000_devopts),
+               ARRAY_AND_SIZE(chroma_62000_devopts_cg),
+               NULL, 0,
+               NULL, 0,
+               ARRAY_AND_SIZE(chroma_62000_cmd),
+               .probe_channels = chroma_62000p_probe_channels,
+       },
        /* HP 6632B */
        { "HP", "6632B", 0,
                ARRAY_AND_SIZE(hp_6632b_devopts),