scpi-pps: Add config keys SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,

[libsigrok.git] / src / hardware / scpi-pps / profiles.c

diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c
index c9ddd61ecb24448a1ba752543d0ef0b9322965ca..a72c90a2ffa9fd55f61849a46c1fb7d90901a7d9 100644 (file)
--- a/src/hardware/scpi-pps/profiles.c
+++ b/src/hardware/scpi-pps/profiles.c
@@ -458,8 +458,12 @@ static const uint32_t hp_6630b_devopts_cg[] = {
        SR_CONF_CURRENT | SR_CONF_GET,
        SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
        SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
        SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
        SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
+       SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
+       SR_CONF_REGULATION | SR_CONF_GET,
 };
 
 static const struct channel_spec hp_6633a_ch[] = {
@@ -518,8 +522,12 @@ static const struct scpi_command hp_6630b_cmd[] = {
        { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" },
        { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT 1" },
        { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT 0" },
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
        { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" },
        { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" },
+       { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
+       { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:OPER:COND?" },
        ALL_ZERO
 };