clear_helper(): Use a cast to shorten all implementations.

[libsigrok.git] / src / hardware / scpi-pps / profiles.c

diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c
index 7cd2e2b71747344ff1dab3b479d64f3f9ce5be7e..75be9efdf525c5d08a0eecdb0ea3d7d0e543e12d 100644 (file)
--- a/src/hardware/scpi-pps/profiles.c
+++ b/src/hardware/scpi-pps/profiles.c
@@ -481,7 +481,7 @@ static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi,
                sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1,
                                spec->voltage[0], spec->voltage[1],
                                spec->current[0], spec->current[1],
-                               spec->power[0]  , spec->power[1]);
+                               spec->power[0], spec->power[1]);
                (*channels)[i].name = (char *)philips_pm2800_names[i];
                memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 15);
                (*channel_groups)[i].name = (char *)philips_pm2800_names[i];
@@ -515,6 +515,53 @@ static const struct scpi_command philips_pm2800_cmd[] = {
        ALL_ZERO
 };
 
+static const uint32_t rs_hmc8043_devopts[] = {
+       SR_CONF_CONTINUOUS,
+};
+
+static const uint32_t rs_hmc8043_devopts_cg[] = {
+       SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
+       SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_VOLTAGE | SR_CONF_GET,
+       SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_CURRENT | SR_CONF_GET,
+       SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
+};
+
+static const struct channel_spec rs_hmc8043_ch[] = {
+       { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY },
+       { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY },
+       { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY },
+};
+
+static const struct channel_group_spec rs_hmc8043_cg[] = {
+       { "1", CH_IDX(0), PPS_OVP },
+       { "2", CH_IDX(1), PPS_OVP },
+       { "3", CH_IDX(2), PPS_OVP },
+};
+
+static const struct scpi_command rs_hmc8043_cmd[] = {
+       { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" },
+       { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
+       { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
+       { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
+       { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
+       { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
+       { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
+       { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
+       { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" },
+       { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" },
+       ALL_ZERO
+};
+
 SR_PRIV const struct scpi_pps pps_profiles[] = {
        /* Agilent N5763A */
        { "Agilent", "N5763A", 0,
@@ -607,6 +654,16 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
                philips_pm2800_cmd,
                philips_pm2800_probe_channels,
        },
+
+       /* Rohde & Schwarz HMC8043 */
+       { "Rohde&Schwarz", "HMC8043", 0,
+               ARRAY_AND_SIZE(rs_hmc8043_devopts),
+               ARRAY_AND_SIZE(rs_hmc8043_devopts_cg),
+               ARRAY_AND_SIZE(rs_hmc8043_ch),
+               ARRAY_AND_SIZE(rs_hmc8043_cg),
+               rs_hmc8043_cmd,
+               .probe_channels = NULL,
+       },
 };
 
 SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);