scpi-pps: Add support for Owon P4000 series.

[libsigrok.git] / src / hardware / rdtech-dps / protocol.c

diff --git a/src/hardware/rdtech-dps/protocol.c b/src/hardware/rdtech-dps/protocol.c
index fe34b25700184fef2bb0428838a9c76e83eee235..65f40ab9297ad681117a06d9f99f2c489bf7c750 100644 (file)
--- a/src/hardware/rdtech-dps/protocol.c
+++ b/src/hardware/rdtech-dps/protocol.c
@@ -120,8 +120,7 @@ SR_PRIV int rdtech_dps_receive_data(int fd, int revents, void *cb_data)
        struct sr_dev_inst *sdi;
        struct dev_context *devc;
        struct sr_modbus_dev_inst *modbus;
-       struct sr_datafeed_packet packet;
-       uint16_t registers[3];
+       uint16_t registers[8];
        int ret;
 
        (void)fd;
@@ -138,25 +137,50 @@ SR_PRIV int rdtech_dps_receive_data(int fd, int revents, void *cb_data)
         * Using the libsigrok function here, because it doesn't matter if the
         * reading fails. It will be done again in the next acquision cycle anyways.
         */
-       ret = sr_modbus_read_holding_registers(modbus, REG_UOUT, 3, registers);
+       ret = sr_modbus_read_holding_registers(modbus, REG_UOUT, 8, registers);
        g_mutex_unlock(&devc->rw_mutex);
 
        if (ret == SR_OK) {
-               packet.type = SR_DF_FRAME_BEGIN;
-               sr_session_send(sdi, &packet);
+               /* Send channel values */
+               std_session_send_df_frame_begin(sdi);
 
                send_value(sdi, sdi->channels->data,
-                       RB16(registers + 0) / 100.0f,
-                       SR_MQ_VOLTAGE, SR_MQFLAG_DC, SR_UNIT_VOLT, 3);
+                       RB16(registers + 0) / devc->voltage_multiplier,
+                       SR_MQ_VOLTAGE, SR_MQFLAG_DC, SR_UNIT_VOLT,
+                       devc->model->voltage_digits);
                send_value(sdi, sdi->channels->next->data,
-                       RB16(registers + 1) / 1000.0f,
-                       SR_MQ_CURRENT, SR_MQFLAG_DC, SR_UNIT_AMPERE, 4);
+                       RB16(registers + 1) / devc->current_multiplier,
+                       SR_MQ_CURRENT, SR_MQFLAG_DC, SR_UNIT_AMPERE,
+                       devc->model->current_digits);
                send_value(sdi, sdi->channels->next->next->data,
                        RB16(registers + 2) / 100.0f,
-                       SR_MQ_POWER, 0, SR_UNIT_WATT, 3);
+                       SR_MQ_POWER, 0, SR_UNIT_WATT, 2);
+
+               std_session_send_df_frame_end(sdi);
+
+               /* Check for state changes */
+               if (devc->actual_ovp_state != (RB16(registers + 5) == STATE_OVP)) {
+                       devc->actual_ovp_state = RB16(registers + 5) == STATE_OVP;
+                       sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
+                               g_variant_new_boolean(devc->actual_ovp_state));
+               }
+               if (devc->actual_ocp_state != (RB16(registers + 5) == STATE_OCP)) {
+                       devc->actual_ocp_state = RB16(registers + 5) == STATE_OCP;
+                       sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
+                               g_variant_new_boolean(devc->actual_ocp_state));
+               }
+               if (devc->actual_regulation_state != RB16(registers + 6)) {
+                       devc->actual_regulation_state = RB16(registers + 6);
+                       sr_session_send_meta(sdi, SR_CONF_REGULATION,
+                               g_variant_new_string(
+                                       devc->actual_regulation_state == MODE_CC ? "CC" : "CV"));
+               }
+               if (devc->actual_output_state != RB16(registers + 7)) {
+                       devc->actual_output_state = RB16(registers + 7);
+                       sr_session_send_meta(sdi, SR_CONF_ENABLED,
+                               g_variant_new_boolean(devc->actual_output_state));
+               }
 
-               packet.type = SR_DF_FRAME_END;
-               sr_session_send(sdi, &packet);
                sr_sw_limits_update_samples_read(&devc->limits, 1);
        }