* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <config.h>
#include "protocol.h"
-#include <libserialport.h>
-
-extern SR_PRIV struct sr_dev_driver ols_driver_info;
-static struct sr_dev_driver *di = &ols_driver_info;
SR_PRIV int send_shortcommand(struct sr_serial_dev_inst *serial,
uint8_t command)
if (serial_write_blocking(serial, buf, 1, serial_timeout(serial, 1)) != 1)
return SR_ERR;
+ if (serial_drain(serial) != 0)
+ return SR_ERR;
+
return SR_OK;
}
if (serial_write_blocking(serial, buf, 5, serial_timeout(serial, 1)) != 5)
return SR_ERR;
+ if (serial_drain(serial) != 0)
+ return SR_ERR;
+
return SR_OK;
}
{
struct dev_context *devc;
- if (!(devc = g_try_malloc(sizeof(struct dev_context)))) {
- sr_err("Device context malloc failed.");
- return NULL;
- }
+ devc = g_malloc0(sizeof(struct dev_context));
/* Device-specific settings */
devc->max_samples = devc->max_samplerate = devc->protocol_version = 0;
{
struct sr_dev_inst *sdi;
struct dev_context *devc;
- struct sr_channel *ch;
uint32_t tmp_int, ui;
uint8_t key, type, token;
int delay_ms;
GString *tmp_str, *devname, *version;
guchar tmp_c;
- sdi = sr_dev_inst_new(SR_ST_INACTIVE, NULL, NULL, NULL);
- sdi->driver = di;
+ sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ sdi->status = SR_ST_INACTIVE;
devc = ols_dev_new();
sdi->priv = devc;
switch (token) {
case 0x00:
/* Number of usable channels */
- for (ui = 0; ui < tmp_int; ui++) {
- if (!(ch = sr_channel_new(ui, SR_CHANNEL_LOGIC, TRUE,
- ols_channel_names[ui])))
- return 0;
- sdi->channels = g_slist_append(sdi->channels, ch);
- }
+ for (ui = 0; ui < tmp_int; ui++)
+ sr_channel_new(sdi, ui, SR_CHANNEL_LOGIC, TRUE,
+ ols_channel_names[ui]);
break;
case 0x01:
/* Amount of sample memory available (bytes) */
/* what is this for? */
break;
case 0x03:
- /* Maximum sample rate (hz) */
+ /* Maximum sample rate (Hz) */
devc->max_samplerate = tmp_int;
break;
case 0x04:
switch (token) {
case 0x00:
/* Number of usable channels */
- for (ui = 0; ui < tmp_c; ui++) {
- if (!(ch = sr_channel_new(ui, SR_CHANNEL_LOGIC, TRUE,
- ols_channel_names[ui])))
- return 0;
- sdi->channels = g_slist_append(sdi->channels, ch);
- }
+ for (ui = 0; ui < tmp_c; ui++)
+ sr_channel_new(sdi, ui, SR_CHANNEL_LOGIC, TRUE,
+ ols_channel_names[ui]);
break;
case 0x01:
/* protocol version */
SR_PRIV void abort_acquisition(const struct sr_dev_inst *sdi)
{
- struct sr_datafeed_packet packet;
struct sr_serial_dev_inst *serial;
serial = sdi->conn;
serial_source_remove(sdi->session, serial);
- /* Terminate session */
- packet.type = SR_DF_END;
- sr_session_send(sdi, &packet);
+ std_session_send_df_end(sdi);
}
SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data)
serial = sdi->conn;
devc = sdi->priv;
+ if (devc->num_transfers == 0 && revents == 0) {
+ /* Ignore timeouts as long as we haven't received anything */
+ return TRUE;
+ }
+
if (devc->num_transfers++ == 0) {
- /*
- * First time round, means the device started sending data,
- * and will not stop until done. If it stops sending for
- * longer than it takes to send a byte, that means it's
- * finished. We'll double that to 30ms to be sure...
- */
- serial_source_remove(sdi->session, serial);
- serial_source_add(sdi->session, serial, G_IO_IN, 30,
- ols_receive_data, cb_data);
devc->raw_sample_buf = g_try_malloc(devc->limit_samples * 4);
if (!devc->raw_sample_buf) {
sr_err("Sample buffer malloc failed.");
logic.unitsize = 4;
logic.data = devc->raw_sample_buf +
(devc->limit_samples - devc->num_samples) * 4;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
}
/* Send the trigger. */
packet.type = SR_DF_TRIGGER;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
/* Send post-trigger samples. */
packet.type = SR_DF_LOGIC;
logic.unitsize = 4;
logic.data = devc->raw_sample_buf + devc->trigger_at * 4 +
(devc->limit_samples - devc->num_samples) * 4;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
} else {
/* no trigger was used */
packet.type = SR_DF_LOGIC;
logic.unitsize = 4;
logic.data = devc->raw_sample_buf +
(devc->limit_samples - devc->num_samples) * 4;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
}
g_free(devc->raw_sample_buf);