#ifndef LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H
#define LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H
-#include <stdint.h>
-#include <glib.h>
#include <libsigrok/libsigrok.h>
-#include "libsigrok-internal.h"
+#include <stdint.h>
-#define LOG_PREFIX "kingst-la2016"
+#define LOG_PREFIX "kingst-la2016"
#define LA2016_VID 0x77a1
#define LA2016_PID 0x01a2
+#define LA2016_IPRODUCT_INDEX 2
#define USB_INTERFACE 0
#define USB_CONFIGURATION 1
-
-#define LA2016_BULK_MAX 8388608
+#define USB_EP_FPGA_BITSTREAM 2
+#define USB_EP_CAPTURE_DATA 6
/*
* On Windows sigrok uses WinUSB RAW_IO policy which requires the
* USB transfer buffer size to be a multiple of the endpoint max packet
- * size, which is 512 bytes in this case. Also, the maximum allowed size of
- * the transfer buffer is normally read from WinUSB_GetPipePolicy API but
- * libusb does not expose this function. Typically, max size is 2MB.
+ * size, which is 512 bytes in this case. Also, the maximum allowed size
+ * of the transfer buffer is normally read from WinUSB_GetPipePolicy API
+ * but libusb does not expose this function. Typically, max size is 2MB.
+ */
+#define LA2016_EP6_PKTSZ 512 /* Max packet size of USB endpoint 6. */
+#define LA2016_USB_BUFSZ (256 * 2 * LA2016_EP6_PKTSZ) /* 256KiB buffer. */
+
+/* USB communication timeout during regular operation. */
+#define DEFAULT_TIMEOUT_MS 200
+
+/*
+ * Check for MCU firmware to take effect after upload. Check the device
+ * presence for a maximum period of time, delay between checks in that
+ * phase. Allow for the device to vanish after upload and before checks,
+ * to not mistake its earlier incarnation for the successful operation
+ * of the most recently loaded firmware.
+ */
+#define RENUM_CHECK_PERIOD_MS 3000
+#define RENUM_GONE_DELAY_MS 1800
+#define RENUM_POLL_INTERVAL_MS 200
+
+/*
+ * The device expects some zero padding to follow the content of the
+ * file which contains the FPGA bitstream. Specify the chunk size here.
*/
-#define LA2016_EP6_PKTSZ 512 /* endpoint 6 max packet size */
-#define LA2016_USB_BUFSZ (256 * 2 * LA2016_EP6_PKTSZ) /* 256KB buffer */
+#define LA2016_EP2_PADDING 2048
-#define MAX_RENUM_DELAY_MS 3000
-#define DEFAULT_TIMEOUT_MS 200
+#define LA2016_THR_VOLTAGE_MIN 0.40
+#define LA2016_THR_VOLTAGE_MAX 4.00
-#define LA2016_THR_VOLTAGE_MIN 0.40
-#define LA2016_THR_VOLTAGE_MAX 4.00
+#define LA2016_NUM_SAMPLES_MAX (UINT64_C(10 * 1000 * 1000 * 1000))
-#define LA2016_NUM_SAMPLES_MIN 256
-#define LA2016_NUM_SAMPLES_MAX (10UL * 1000 * 1000 * 1000)
+/* Maximum device capabilities. May differ between models. */
+#define MAX_PWM_FREQ SR_MHZ(20)
+#define PWM_CLOCK SR_MHZ(200) /* 200MHz for both LA2016 and LA1016 */
-typedef struct pwm_setting_dev {
+#define LA2016_NUM_PWMCH_MAX 2
+
+#define LA2016_CONVBUFFER_SIZE (4 * 1024 * 1024)
+
+struct kingst_model {
+ uint8_t magic; /* EEPROM magic byte value. */
+ const char *name; /* User perceived model name. */
+ const char *fpga_stem; /* Bitstream filename stem. */
+ uint64_t samplerate; /* Max samplerate in Hz. */
+ size_t channel_count; /* Max channel count (16, 32). */
+ uint64_t memory_bits; /* RAM capacity in Gbit (1, 2, 4). */
+};
+
+struct pwm_setting_dev {
uint32_t period;
uint32_t duty;
-} pwm_setting_dev_t;
+};
-typedef struct trigger_cfg {
+struct trigger_cfg {
uint32_t channels;
uint32_t enabled;
uint32_t level;
uint32_t high_or_falling;
-} trigger_cfg_t;
+};
-typedef struct capture_info {
+struct capture_info {
uint32_t n_rep_packets;
uint32_t n_rep_packets_before_trigger;
uint32_t write_pos;
-} capture_info_t;
+};
-#define NUM_PACKETS_IN_CHUNK 5
-#define TRANSFER_PACKET_LENGTH 16
+#define NUM_PACKETS_IN_CHUNK 5
+#define TRANSFER_PACKET_LENGTH 16
-typedef struct pwm_setting {
- uint8_t enabled;
+struct pwm_setting {
+ gboolean enabled;
float freq;
float duty;
-} pwm_setting_t;
+};
struct dev_context {
- struct sr_context *ctx;
-
- int64_t fw_updated;
- pwm_setting_t pwm_setting[2];
- unsigned int threshold_voltage_idx;
+ uint16_t usb_pid;
+ char *mcu_firmware;
+ char *fpga_bitstream;
+ uint64_t fw_uploaded; /* Timestamp of most recent FW upload. */
+ uint8_t identify_magic;
+ const struct kingst_model *model;
+
+ /* User specified parameters. */
+ struct pwm_setting pwm_setting[LA2016_NUM_PWMCH_MAX];
+ size_t threshold_voltage_idx;
float threshold_voltage;
- uint64_t max_samplerate;
uint64_t cur_samplerate;
- uint64_t limit_samples;
+ struct sr_sw_limits sw_limits;
uint64_t capture_ratio;
- uint16_t cur_channels;
- int num_channels;
-
- uint32_t bitstream_size;
-
- /* derived stuff */
- uint64_t pre_trigger_size;
-
- /* state after sampling */
- int had_triggers_configured;
- int have_trigger;
- int transfer_finished;
- capture_info_t info;
- unsigned int n_transfer_packets_to_read; /* each with 5 acq packets */
- unsigned int n_bytes_to_read;
- unsigned int n_reps_until_trigger;
- unsigned int reading_behind_trigger;
+
+ /* Internal acquisition and download state. */
+ gboolean trigger_involved;
+ gboolean completion_seen;
+ gboolean download_finished;
+ struct capture_info info;
+ uint32_t n_transfer_packets_to_read; /* each with 5 acq packets */
+ uint32_t n_bytes_to_read;
+ uint32_t n_reps_until_trigger;
+ gboolean trigger_marked;
uint64_t total_samples;
uint32_t read_pos;
- unsigned int convbuffer_size;
- uint8_t *convbuffer;
+ struct feed_queue_logic *feed_queue;
struct libusb_transfer *transfer;
};
-SR_PRIV int la2016_upload_firmware(struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id);
+SR_PRIV int la2016_upload_firmware(const struct sr_dev_inst *sdi,
+ struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id);
SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_start_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_abort_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_receive_data(int fd, int revents, void *cb_data);
+SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
+ gboolean show_message);
SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi);
SR_PRIV int la2016_deinit_device(const struct sr_dev_inst *sdi);