* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
+#include <config.h>
#include "protocol.h"
#define USB_VENDOR_ID 0x0403
#define USB_DEVICE_ID 0x6014
-#define USB_VENDOR_NAME "IKALOGIC"
-#define USB_MODEL_NAME "ScanaPLUS"
#define USB_IPRODUCT "SCANAPLUS"
#define SAMPLE_BUF_SIZE (8 * 1024 * 1024)
-static const uint32_t devopts[] = {
+static const uint32_t drvopts[] = {
SR_CONF_LOGIC_ANALYZER,
+};
+
+static const uint32_t devopts[] = {
SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
SR_CONF_LIMIT_MSEC | SR_CONF_SET,
SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
};
-/* Channels are numbered 1-9. */
static const char *channel_names[] = {
"1", "2", "3", "4", "5", "6", "7", "8", "9",
- NULL,
};
/* Note: The IKALOGIC ScanaPLUS always samples at 100MHz. */
-static uint64_t samplerates[1] = { SR_MHZ(100) };
-
-SR_PRIV struct sr_dev_driver ikalogic_scanaplus_driver_info;
-static struct sr_dev_driver *di = &ikalogic_scanaplus_driver_info;
-
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
+static const uint64_t samplerates[1] = { SR_MHZ(100) };
-static void clear_helper(void *priv)
+static void clear_helper(struct dev_context *devc)
{
- struct dev_context *devc;
-
- devc = priv;
-
ftdi_free(devc->ftdic);
g_free(devc->compressed_buf);
g_free(devc->sample_buf);
- g_free(devc);
}
-static int dev_clear(void)
+static int dev_clear(const struct sr_dev_driver *di)
{
- return std_dev_clear(di, clear_helper);
+ return std_dev_clear_with_callback(di, (std_dev_clear_callback)clear_helper);
}
-static int init(struct sr_context *sr_ctx)
-{
- return std_init(sr_ctx, di, LOG_PREFIX);
-}
-
-static GSList *scan(GSList *options)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_dev_inst *sdi;
- struct drv_context *drvc;
struct dev_context *devc;
- GSList *devices;
unsigned int i;
int ret;
(void)options;
- drvc = di->priv;
-
- devices = NULL;
-
- /* Allocate memory for our private device context. */
devc = g_malloc0(sizeof(struct dev_context));
/* Allocate memory for the incoming compressed samples. */
goto err_free_compressed_buf;
}
- /* Allocate memory for the FTDI context (ftdic) and initialize it. */
if (!(devc->ftdic = ftdi_new())) {
sr_err("Failed to initialize libftdi.");
goto err_free_sample_buf;
}
- /* Check for the device and temporarily open it. */
ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID,
USB_IPRODUCT, NULL);
if (ret < 0) {
goto err_free_ftdic;
}
- /* Register the device with libsigrok. */
sdi = g_malloc0(sizeof(struct sr_dev_inst));
- sdi->status = SR_ST_INITIALIZING;
- sdi->vendor = g_strdup(USB_VENDOR_NAME);
- sdi->model = g_strdup(USB_MODEL_NAME);
- sdi->driver = di;
+ sdi->status = SR_ST_INACTIVE;
+ sdi->vendor = g_strdup("IKALOGIC");
+ sdi->model = g_strdup("ScanaPLUS");
sdi->priv = devc;
- for (i = 0; channel_names[i]; i++)
- sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
- channel_names[i]);
-
- devices = g_slist_append(devices, sdi);
- drvc->instances = g_slist_append(drvc->instances, sdi);
+ for (i = 0; i < ARRAY_SIZE(channel_names); i++)
+ sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE, channel_names[i]);
- /* Close device. We'll reopen it again when we need it. */
scanaplus_close(devc);
- return devices;
+ return std_scan_complete(di, g_slist_append(NULL, sdi));
scanaplus_close(devc);
err_free_ftdic:
- ftdi_free(devc->ftdic); /* NOT free() or g_free()! */
+ ftdi_free(devc->ftdic);
err_free_sample_buf:
g_free(devc->sample_buf);
err_free_compressed_buf:
return NULL;
}
-static GSList *dev_list(void)
-{
- return ((struct drv_context *)(di->priv))->instances;
-}
-
static int dev_open(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
devc = sdi->priv;
- /* Select interface A, otherwise communication will fail. */
ret = ftdi_set_interface(devc->ftdic, INTERFACE_A);
if (ret < 0) {
sr_err("Failed to set FTDI interface A (%d): %s", ret,
ftdi_get_error_string(devc->ftdic));
return SR_ERR;
}
- sr_dbg("FTDI chip interface A set successfully.");
- /* Open the device. */
ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID,
USB_IPRODUCT, NULL);
if (ret < 0) {
ftdi_get_error_string(devc->ftdic));
return SR_ERR;
}
- sr_dbg("FTDI device opened successfully.");
- /* Purge RX/TX buffers in the FTDI chip. */
if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) {
sr_err("Failed to purge FTDI RX/TX buffers (%d): %s.",
ret, ftdi_get_error_string(devc->ftdic));
goto err_dev_open_close_ftdic;
}
- sr_dbg("FTDI chip buffers purged successfully.");
- /* Reset the FTDI bitmode. */
ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_RESET);
if (ret < 0) {
sr_err("Failed to reset the FTDI chip bitmode (%d): %s.",
ret, ftdi_get_error_string(devc->ftdic));
goto err_dev_open_close_ftdic;
}
- sr_dbg("FTDI chip bitmode reset successfully.");
- /* Set FTDI bitmode to "sync FIFO". */
ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_SYNCFF);
if (ret < 0) {
sr_err("Failed to put FTDI chip into sync FIFO mode (%d): %s.",
ret, ftdi_get_error_string(devc->ftdic));
goto err_dev_open_close_ftdic;
}
- sr_dbg("FTDI chip sync FIFO mode entered successfully.");
- /* Set the FTDI latency timer to 2. */
ret = ftdi_set_latency_timer(devc->ftdic, 2);
if (ret < 0) {
sr_err("Failed to set FTDI latency timer (%d): %s.",
ret, ftdi_get_error_string(devc->ftdic));
goto err_dev_open_close_ftdic;
}
- sr_dbg("FTDI chip latency timer set successfully.");
- /* Set the FTDI read data chunk size to 64kB. */
ret = ftdi_read_data_set_chunksize(devc->ftdic, 64 * 1024);
if (ret < 0) {
sr_err("Failed to set FTDI read data chunk size (%d): %s.",
ret, ftdi_get_error_string(devc->ftdic));
goto err_dev_open_close_ftdic;
}
- sr_dbg("FTDI chip read data chunk size set successfully.");
/* Get the ScanaPLUS device ID from the FTDI EEPROM. */
if ((ret = scanaplus_get_device_id(devc)) < 0) {
sr_dbg("Received ScanaPLUS device ID successfully: %02x %02x %02x.",
devc->devid[0], devc->devid[1], devc->devid[2]);
- sdi->status = SR_ST_ACTIVE;
-
return SR_OK;
err_dev_open_close_ftdic:
scanaplus_close(devc);
+
return SR_ERR;
}
static int dev_close(struct sr_dev_inst *sdi)
{
- int ret;
struct dev_context *devc;
- ret = SR_OK;
devc = sdi->priv;
- if (sdi->status == SR_ST_ACTIVE) {
- sr_dbg("Status ACTIVE, closing device.");
- ret = scanaplus_close(devc);
- } else {
- sr_spew("Status not ACTIVE, nothing to do.");
- }
-
- sdi->status = SR_ST_INACTIVE;
-
- return ret;
-}
-
-static int cleanup(void)
-{
- return dev_clear();
+ return scanaplus_close(devc);
}
-static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_get(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
(void)sdi;
(void)cg;
return SR_OK;
}
-static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
switch (key) {
/* Nothing to do, the ScanaPLUS samplerate is always 100MHz. */
break;
case SR_CONF_LIMIT_MSEC:
- if (g_variant_get_uint64(data) == 0)
- return SR_ERR_ARG;
devc->limit_msec = g_variant_get_uint64(data);
break;
case SR_CONF_LIMIT_SAMPLES:
- if (g_variant_get_uint64(data) == 0)
- return SR_ERR_ARG;
devc->limit_samples = g_variant_get_uint64(data);
break;
default:
return SR_OK;
}
-static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_list(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- GVariant *gvar;
- GVariantBuilder gvb;
-
- (void)sdi;
- (void)cg;
-
switch (key) {
case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
- break;
+ return STD_CONFIG_LIST(key, data, sdi, cg, NO_OPTS, drvopts, devopts);
case SR_CONF_SAMPLERATE:
- g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
- gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
- samplerates, ARRAY_SIZE(samplerates),
- sizeof(uint64_t));
- g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
- *data = g_variant_builder_end(&gvb);
+ *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates));
break;
default:
return SR_ERR_NA;
return SR_OK;
}
-static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
+static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
int ret;
struct dev_context *devc;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- if (!(devc = sdi->priv))
- return SR_ERR_BUG;
+ devc = sdi->priv;
if (!devc->ftdic)
return SR_ERR_BUG;
/* TODO: Configure channels later (thresholds etc.). */
- devc->cb_data = cb_data;
-
/* Properly reset internal variables before every new acquisition. */
devc->compressed_bytes_ignored = 0;
devc->samples_sent = 0;
if ((ret = scanaplus_start_acquisition(devc)) < 0)
return ret;
- /* Send header packet to the session bus. */
- std_session_send_df_header(sdi, LOG_PREFIX);
+ std_session_send_df_header(sdi);
/* Hook up a dummy handler to receive data from the device. */
- sr_session_source_add(sdi->session, -1, G_IO_IN, 0, scanaplus_receive_data, (void *)sdi);
+ sr_session_source_add(sdi->session, -1, 0, 0, scanaplus_receive_data, (void *)sdi);
return SR_OK;
}
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
+static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
- struct sr_datafeed_packet packet;
-
- (void)cb_data;
-
- sr_dbg("Stopping acquisition.");
sr_session_source_remove(sdi->session, -1);
-
- /* Send end packet to the session bus. */
- sr_dbg("Sending SR_DF_END.");
- packet.type = SR_DF_END;
- sr_session_send(sdi, &packet);
+ std_session_send_df_end(sdi);
return SR_OK;
}
-SR_PRIV struct sr_dev_driver ikalogic_scanaplus_driver_info = {
+static struct sr_dev_driver ikalogic_scanaplus_driver_info = {
.name = "ikalogic-scanaplus",
.longname = "IKALOGIC ScanaPLUS",
.api_version = 1,
- .init = init,
- .cleanup = cleanup,
+ .init = std_init,
+ .cleanup = std_cleanup,
.scan = scan,
- .dev_list = dev_list,
+ .dev_list = std_dev_list,
.dev_clear = dev_clear,
.config_get = config_get,
.config_set = config_set,
.dev_close = dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
- .priv = NULL,
+ .context = NULL,
};
+SR_REGISTER_DEV_DRIVER(ikalogic_scanaplus_driver_info);