*/
#include <config.h>
+#include <scpi.h>
+#include <string.h>
#include "protocol.h"
-SR_PRIV struct sr_dev_driver hp_3457a_driver_info;
+static const uint32_t scanopts[] = {
+ SR_CONF_CONN,
+};
+
+static const uint32_t drvopts[] = {
+ SR_CONF_MULTIMETER,
+};
+
+static const uint32_t devopts[] = {
+ SR_CONF_CONTINUOUS,
+ SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
+ SR_CONF_MEASURED_QUANTITY | SR_CONF_SET,
+ SR_CONF_ADC_POWERLINE_CYCLES | SR_CONF_SET | SR_CONF_GET,
+};
+
+static struct sr_dev_driver hp_3457a_driver_info;
-static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
+static int create_front_channel(struct sr_dev_inst *sdi, int chan_idx)
{
- return std_init(sr_ctx, di, LOG_PREFIX);
+ struct sr_channel *channel;
+ struct sr_channel_group *front;
+ struct channel_context *chanc;
+
+ chanc = g_malloc(sizeof(*chanc));
+ chanc->location = CONN_FRONT;
+
+ channel = sr_channel_new(sdi, chan_idx++, SR_CHANNEL_ANALOG,
+ TRUE, "Front");
+ channel->priv = chanc;
+
+ front = g_malloc0(sizeof(*front));
+ front->name = g_strdup("Front");
+ front->channels = g_slist_append(front->channels, channel);
+
+ sdi->channel_groups = g_slist_append(sdi->channel_groups, front);
+
+ return chan_idx;
}
-static GSList *scan(struct sr_dev_driver *di, GSList *options)
+static int create_rear_channels(struct sr_dev_inst *sdi, int chan_idx,
+ const struct rear_card_info *card)
+{
+ unsigned int i;
+ struct sr_channel *channel;
+ struct sr_channel_group *group;
+ struct channel_context *chanc;
+ char name[16];
+
+ /* When card is NULL, we couldn't identify the type of card. */
+ if (!card)
+ return chan_idx;
+
+ group = g_malloc0(sizeof(*group));
+ group->priv = NULL;
+ group->name = g_strdup(card->cg_name);
+ sdi->channel_groups = g_slist_append(sdi->channel_groups, group);
+
+ for (i = 0; i < card->num_channels; i++) {
+
+ chanc = g_malloc(sizeof(*chanc));
+ chanc->location = CONN_REAR;
+
+ if (card->type == REAR_TERMINALS) {
+ chanc->index = -1;
+ g_snprintf(name, sizeof(name), "%s", card->cg_name);
+ } else {
+ chanc->index = i;
+ g_snprintf(name, sizeof(name), "%s%u", card->cg_name, i);
+ }
+
+ channel = sr_channel_new(sdi, chan_idx++, SR_CHANNEL_ANALOG,
+ FALSE, name);
+ channel->priv = chanc;
+ group->channels = g_slist_append(group->channels, channel);
+ }
+
+ return chan_idx;
+}
+
+static gchar *get_revision(struct sr_scpi_dev_inst *scpi)
{
- struct drv_context *drvc;
- GSList *devices;
+ int ret, major, minor;
+ GArray *rev_numbers;
- (void)options;
+ /* Report a version of '0.0' if we can't parse the response. */
+ major = minor = 0;
- devices = NULL;
- drvc = di->context;
- drvc->instances = NULL;
+ ret = sr_scpi_get_floatv(scpi, "REV?", &rev_numbers);
+ if ((ret == SR_OK) && (rev_numbers->len >= 2)) {
+ major = (int)g_array_index(rev_numbers, float, 0);
+ minor = (int)g_array_index(rev_numbers, float, 1);
+ }
- /* TODO: scan for devices, either based on a SR_CONF_CONN option
- * or on a USB scan. */
+ g_array_free(rev_numbers, TRUE);
- return devices;
+ return g_strdup_printf("%d.%d", major, minor);
}
-static GSList *dev_list(const struct sr_dev_driver *di)
+static struct sr_dev_inst *probe_device(struct sr_scpi_dev_inst *scpi)
{
- return ((struct drv_context *)(di->context))->instances;
+ int ret, idx;
+ char *response;
+ struct sr_dev_inst *sdi;
+ struct dev_context *devc;
+
+ /*
+ * This command ensures we receive an EOI after every response, so that
+ * we don't wait the entire timeout after the response is received.
+ */
+ if (sr_scpi_send(scpi, "END ALWAYS") != SR_OK)
+ return NULL;
+
+ ret = sr_scpi_get_string(scpi, "ID?", &response);
+ if ((ret != SR_OK) || !response)
+ return NULL;
+
+ if (strcmp(response, "HP3457A"))
+ return NULL;
+
+ g_free(response);
+
+ devc = g_malloc0(sizeof(struct dev_context));
+ sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ sdi->vendor = g_strdup("Hewlett-Packard");
+ sdi->model = g_strdup("3457A");
+ sdi->version = get_revision(scpi);
+ sdi->conn = scpi;
+ sdi->driver = &hp_3457a_driver_info;
+ sdi->inst_type = SR_INST_SCPI;
+ sdi->priv = devc;
+
+ /* There is no way to probe the measurement mode. It must be set. */
+ devc->measurement_mq = 0;
+ devc->measurement_unit = 0;
+
+ /* Probe rear card option and create channels accordingly (TODO). */
+ devc->rear_card = hp_3457a_probe_rear_card(scpi);
+ idx = 0;
+ idx = create_front_channel(sdi, idx);
+ create_rear_channels(sdi, idx, devc->rear_card);
+
+ return sdi;
}
-static int dev_clear(const struct sr_dev_driver *di)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
- return std_dev_clear(di, NULL);
+ return sr_scpi_scan(di->context, options, probe_device);
}
+/*
+ * We need to set the HP 3457A to a known state, and there are quite a number
+ * of knobs to tweak. Here's a brief explanation of what's going on. For more
+ * details, print out and consult the user manual.
+ * PRESET
+ * Set the instrument to a pre-determined state. This is easier and faster
+ * than sending a few dozen commands. Some of the PRESET defaults include
+ * ASCII output format, and synchronous triggering. See user manual for
+ * more details.
+ *
+ * After the PRESET command, the instrument is in a known state, and only those
+ * parameters for which the default is unsuitable are modified:
+ * INBUF ON
+ * Enable the HP-IB input buffer. This allows the instrument to release the
+ * HP-IB bus before processing the command, and increases throughput on
+ * GPIB buses with more than one device.
+ * TRIG HOLD
+ * Do not trigger new measurements until instructed to do so.
+ */
static int dev_open(struct sr_dev_inst *sdi)
{
- (void)sdi;
+ struct sr_scpi_dev_inst *scpi = sdi->conn;
+ struct dev_context *devc;
- /* TODO: get handle from sdi->conn and open it. */
+ if (sr_scpi_open(scpi) != SR_OK)
+ return SR_ERR;
- sdi->status = SR_ST_ACTIVE;
+ devc = sdi->priv;
+
+ sr_scpi_send(scpi, "PRESET");
+ sr_scpi_send(scpi, "INBUF ON");
+ sr_scpi_send(scpi, "TRIG HOLD");
+ sr_scpi_get_float(scpi, "NPLC?", &devc->nplc);
return SR_OK;
}
static int dev_close(struct sr_dev_inst *sdi)
{
- (void)sdi;
-
- /* TODO: get handle from sdi->conn and close it. */
+ struct sr_scpi_dev_inst *scpi = sdi->conn;
- sdi->status = SR_ST_INACTIVE;
+ /* Disable scan-advance (preserve relay life). */
+ sr_scpi_send(scpi, "SADV HOLD");
+ /* Switch back to auto-triggering. */
+ sr_scpi_send(scpi, "TRIG AUTO");
- return SR_OK;
-}
-
-static int cleanup(const struct sr_dev_driver *di)
-{
- dev_clear(di);
-
- /* TODO: free other driver resources, if any. */
+ sr_scpi_close(scpi);
return SR_OK;
}
static int config_get(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
+ struct dev_context *devc;
- (void)sdi;
- (void)data;
(void)cg;
- ret = SR_OK;
+ devc = sdi->priv;
+
switch (key) {
- /* TODO */
+ case SR_CONF_ADC_POWERLINE_CYCLES:
+ *data = g_variant_new_double(devc->nplc);
+ break;
default:
return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
+ enum sr_mq mq;
+ enum sr_mqflag mq_flags;
+ struct dev_context *devc;
+ GVariant *tuple_child;
- (void)data;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
+ devc = sdi->priv;
- ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_LIMIT_SAMPLES:
+ devc->limit_samples = g_variant_get_uint64(data);
+ break;
+ case SR_CONF_MEASURED_QUANTITY:
+ tuple_child = g_variant_get_child_value(data, 0);
+ mq = g_variant_get_uint32(tuple_child);
+ tuple_child = g_variant_get_child_value(data, 1);
+ mq_flags = g_variant_get_uint64(tuple_child);
+ g_variant_unref(tuple_child);
+ return hp_3457a_set_mq(sdi, mq, mq_flags);
+ case SR_CONF_ADC_POWERLINE_CYCLES:
+ return hp_3457a_set_nplc(sdi, g_variant_get_double(data));
default:
- ret = SR_ERR_NA;
+ return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
static int config_list(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
+ /*
+ * TODO: Implement channel group configuration when adding support for
+ * plug-in cards.
+ */
- (void)sdi;
- (void)data;
- (void)cg;
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
+}
- ret = SR_OK;
- switch (key) {
- /* TODO */
- default:
- return SR_ERR_NA;
- }
+static void create_channel_index_list(GSList *channels, GArray **arr)
+{
+ struct sr_channel *channel;
+ struct channel_context *chanc;
+ GSList *list_elem;
+
+ *arr = g_array_new(FALSE, FALSE, sizeof(unsigned int));
- return ret;
+ for (list_elem = channels; list_elem; list_elem = list_elem->next) {
+ channel = list_elem->data;
+ chanc = channel->priv;
+ g_array_append_val(*arr, chanc->index);
+ }
}
-static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
+/*
+ * TRIG SGL
+ * Trigger the first measurement, then hold. We can't let the instrument
+ * auto-trigger because we read several registers to make a complete
+ * reading. If the instrument were auto-triggering, we could get the
+ * reading for sample N, but a new measurement is made and when we read the
+ * HIRES register, it contains data for sample N+1. This would produce
+ * wrong readings.
+ * SADV AUTO
+ * Activate the scan-advance feature. This automatically connects the next
+ * channel in the scan list to the A/D converter. This way, we do not need to
+ * occupy the HP-IB bus to send channel select commands.
+ */
+static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
- (void)sdi;
- (void)cb_data;
+ int ret;
+ gboolean front_selected, rear_selected;
+ struct sr_scpi_dev_inst *scpi;
+ struct sr_channel *channel;
+ struct dev_context *devc;
+ struct channel_context *chanc;
+ GArray *ch_list;
+ GSList *channels;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
+ scpi = sdi->conn;
+ devc = sdi->priv;
+
+ ret = sr_scpi_source_add(sdi->session, scpi, G_IO_IN, 100,
+ hp_3457a_receive_data, (void *)sdi);
+ if (ret != SR_OK)
+ return ret;
+
+ std_session_send_df_header(sdi);
+
+ front_selected = rear_selected = FALSE;
+ devc->active_channels = NULL;
+
+ for (channels = sdi->channels; channels; channels = channels->next) {
+ channel = channels->data;
+
+ if (!channel->enabled)
+ continue;
+
+ chanc = channel->priv;
+
+ if (chanc->location == CONN_FRONT)
+ front_selected = TRUE;
+ if (chanc->location == CONN_REAR)
+ rear_selected = TRUE;
+
+ devc->active_channels = g_slist_append(devc->active_channels, channel);
+ }
+
+ if (front_selected && rear_selected) {
+ sr_err("Can not use front and rear channels at the same time!");
+ g_slist_free(devc->active_channels);
+ return SR_ERR_ARG;
+ }
+
+ devc->num_active_channels = g_slist_length(devc->active_channels);
+ if (!devc->num_active_channels) {
+ sr_err("Need at least one active channel!");
+ g_slist_free(devc->active_channels);
+ return SR_ERR_ARG;
+ }
+ devc->current_channel = devc->active_channels->data;
+
+ hp_3457a_select_input(sdi, front_selected ? CONN_FRONT : CONN_REAR);
+
+ /* For plug-in cards, use the scan-advance features to scan channels. */
+ if (rear_selected && (devc->rear_card->card_id != REAR_TERMINALS)) {
+ create_channel_index_list(devc->active_channels, &ch_list);
+ hp_3457a_send_scan_list(sdi, (void *)ch_list->data, ch_list->len);
+ sr_scpi_send(scpi, "SADV AUTO");
+ g_array_free(ch_list, TRUE);
+ }
- /* TODO: configure hardware, reset acquisition state, set up
- * callbacks and send header packet. */
+ /* Start first measurement. */
+ sr_scpi_send(scpi, "TRIG SGL");
+ devc->acq_state = ACQ_TRIGGERED_MEASUREMENT;
+ devc->num_samples = 0;
return SR_OK;
}
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
+static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
- (void)cb_data;
+ struct dev_context *devc;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
+ devc = sdi->priv;
- /* TODO: stop acquisition. */
+ g_slist_free(devc->active_channels);
return SR_OK;
}
-SR_PRIV struct sr_dev_driver hp_3457a_driver_info = {
+static struct sr_dev_driver hp_3457a_driver_info = {
.name = "hp-3457a",
.longname = "HP 3457A",
.api_version = 1,
- .init = init,
- .cleanup = cleanup,
+ .init = std_init,
+ .cleanup = std_cleanup,
.scan = scan,
- .dev_list = dev_list,
- .dev_clear = dev_clear,
+ .dev_list = std_dev_list,
+ .dev_clear = std_dev_clear,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
+SR_REGISTER_DEV_DRIVER(hp_3457a_driver_info);