*/
#include <config.h>
+#include <math.h>
+#include <stdlib.h>
#include "scpi.h"
#include "protocol.h"
static const char *scope_trigger_slopes[] = {
"POS",
"NEG",
+ "EITH",
NULL,
};
"CH2",
"LINE",
"EXT",
+ "PATT",
+ "BUS1",
+ "BUS2",
"D0",
"D1",
"D2",
"CH4",
"LINE",
"EXT",
+ "PATT",
+ "BUS1",
+ "BUS2",
"D0",
"D1",
"D2",
{ 2, 1 },
{ 5, 1 },
{ 10, 1 },
+ { 20, 1 },
+ { 50, 1 },
};
static const char *scope_analog_channel_names[] = {
static const struct scope_config scope_models[] = {
{
- .name = {"HMO722", "HMO1022", "HMO1522", "HMO2022", NULL},
+ /* HMO2522/3032/3042/3052 support 16 digital channels but they're not supported yet. */
+ .name = {"HMO1002", "HMO722", "HMO1022", "HMO1522", "HMO2022", "HMO2522",
+ "HMO3032", "HMO3042", "HMO3052", NULL},
.analog_channels = 2,
.digital_channels = 8,
.digital_pods = 1,
.scpi_dialect = &hameg_scpi_dialect,
},
{
- .name = {"HMO724", "HMO1024", "HMO1524", "HMO2024", NULL},
+ /* HMO2524/3034/3044/3054 support 16 digital channels but they're not supported yet. */
+ .name = {"HMO724", "HMO1024", "HMO1524", "HMO2024", "HMO2524",
+ "HMO3034", "HMO3044", "HMO3054", NULL},
.analog_channels = 4,
.digital_channels = 8,
.digital_pods = 1,
* @return SR_ERR on any parsing error, SR_OK otherwise.
*/
static int array_float_get(gchar *value, const uint64_t array[][2],
- int array_len, int *result)
+ int array_len, unsigned int *result)
{
- int i;
+ int i, e;
+ size_t pos;
uint64_t f;
float s;
unsigned int s_int;
memset(ss, 0, sizeof(ss));
memset(es, 0, sizeof(es));
- strncpy(ss, value, 5);
- strncpy(es, &(value[6]), 3);
+ /* Get index of the separating 'E' character and break up the string. */
+ pos = strcspn(value, "E");
+
+ strncpy(ss, value, pos);
+ strncpy(es, &(value[pos+1]), 3);
if (sr_atof_ascii(ss, &s) != SR_OK)
return SR_ERR;
- if (sr_atoi(es, &i) != SR_OK)
+ if (sr_atoi(es, &e) != SR_OK)
return SR_ERR;
/* Transform e.g. 10^-03 to 1000 as the array stores the inverse. */
- f = pow(10, abs(i));
+ f = pow(10, abs(e));
/*
* Adjust the significand/factor pair to make sure
*/
while ((int)fmod(log10(f), 3) > 0) {
s *= 10;
- f *= 10;
+
+ if (e < 0)
+ f *= 10;
+ else
+ f /= 10;
}
/* Truncate s to circumvent rounding errors. */
const struct scope_config *config;
float tmp_float;
unsigned int i;
+ char *tmp_str;
devc = sdi->priv;
config = devc->model_config;
&tmp_float) != SR_OK)
return SR_ERR;
- for (i = 0; i < config->num_timebases; i++) {
- if (tmp_float == ((float) (*config->timebases)[i][0] /
- (*config->timebases)[i][1])) {
- state->timebase = i;
- break;
- }
- }
- if (i == config->num_timebases) {
+ if (sr_scpi_get_string(sdi->conn,
+ (*config->scpi_dialect)[SCPI_CMD_GET_TIMEBASE],
+ &tmp_str) != SR_OK)
+ return SR_ERR;
+
+ if (array_float_get(tmp_str, hmo_timebases, ARRAY_SIZE(hmo_timebases),
+ &i) != SR_OK) {
+ g_free(tmp_str);
sr_err("Could not determine array index for time base.");
return SR_ERR;
}
+ state->timebase = i;
+
if (sr_scpi_get_float(sdi->conn,
(*config->scpi_dialect)[SCPI_CMD_GET_HORIZ_TRIGGERPOS],
&tmp_float) != SR_OK)
struct sr_datafeed_logic logic;
(void)fd;
+ (void)revents;
data = NULL;
if (!(devc = sdi->priv))
return TRUE;
+ /* Although this is correct in general, the USBTMC libusb implementation
+ * currently does not generate an event prior to the first read. Often
+ * it is ok to start reading just after the 50ms timeout. See bug #785.
if (revents != G_IO_IN)
return TRUE;
+ */
ch = devc->current_channel->data;
analog.mqflags = 0;
packet.type = SR_DF_ANALOG_OLD;
packet.payload = &analog;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
g_slist_free(analog.channels);
g_array_free(data, TRUE);
data = NULL;
logic.data = data->data;
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
g_array_free(data, TRUE);
data = NULL;
break;
devc->current_channel = devc->current_channel->next;
hmo_request_data(sdi);
} else if (++devc->num_frames == devc->frame_limit) {
- sdi->driver->dev_acquisition_stop(sdi, cb_data);
+ sdi->driver->dev_acquisition_stop(sdi);
} else {
devc->current_channel = devc->enabled_channels;
hmo_request_data(sdi);