* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/** @file
- * <em>Conrad DIGI 35 CPU</em> power supply driver
- * @internal
- */
-
#include <config.h>
#include "protocol.h"
SR_CONF_SERIALCOMM,
};
-static const uint32_t devopts[] = {
+static const uint32_t drvopts[] = {
SR_CONF_POWER_SUPPLY,
- SR_CONF_VOLTAGE | SR_CONF_SET,
- SR_CONF_CURRENT | SR_CONF_SET,
+};
+
+static const uint32_t devopts[] = {
+ SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST,
SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
};
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
+ struct dev_context *devc;
struct sr_dev_inst *sdi;
- struct drv_context *drvc;
struct sr_config *src;
struct sr_serial_dev_inst *serial;
- GSList *l, *devices;
+ GSList *l;
const char *conn, *serialcomm;
- devices = NULL;
- drvc = di->context;
conn = serialcomm = NULL;
for (l = options; l; l = l->next) {
sdi->status = SR_ST_INACTIVE;
sdi->vendor = g_strdup("Conrad");
sdi->model = g_strdup("DIGI 35 CPU");
+ devc = g_malloc0(sizeof(struct dev_context));
+ sr_sw_limits_init(&devc->limits);
+ sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
- sdi->priv = NULL;
+ sdi->priv = devc;
sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "CH1");
- devices = g_slist_append(devices, sdi);
- return std_scan_complete(di, devices);
+ return std_scan_complete(di, g_slist_append(NULL, sdi));
}
-static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
double dblval;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
switch (key) {
- case SR_CONF_VOLTAGE:
+ case SR_CONF_VOLTAGE_TARGET:
dblval = g_variant_get_double(data);
if ((dblval < 0.0) || (dblval > 35.0)) {
sr_err("Voltage out of range (0 - 35.0)!");
return SR_ERR_ARG;
}
- ret = send_msg1(sdi, 'V', (int) (dblval * 10 + 0.5));
- break;
- case SR_CONF_CURRENT:
+ return send_msg1(sdi, 'V', (int) (dblval * 10 + 0.5));
+ case SR_CONF_CURRENT_LIMIT:
dblval = g_variant_get_double(data);
- if ((dblval < 0.01) || (dblval > 2.55)) {
+ if ((dblval < 0.00) || (dblval > 2.55)) {
sr_err("Current out of range (0 - 2.55)!");
return SR_ERR_ARG;
}
- ret = send_msg1(sdi, 'C', (int) (dblval * 100 + 0.5));
- break;
+ return send_msg1(sdi, 'C', (int) (dblval * 100 + 0.5));
case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
if (g_variant_get_boolean(data))
- ret = send_msg1(sdi, 'V', 900);
+ return send_msg1(sdi, 'V', 900);
else /* Constant current mode */
- ret = send_msg1(sdi, 'V', 901);
- break;
+ return send_msg1(sdi, 'V', 901);
default:
- ret = SR_ERR_NA;
+ return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
-static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_list(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
-
- (void)sdi;
- (void)cg;
-
- ret = SR_OK;
switch (key) {
case SR_CONF_SCAN_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
- break;
case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
+ case SR_CONF_VOLTAGE_TARGET:
+ *data = std_gvar_min_max_step(0.0, 35.0, 0.1);
+ break;
+ case SR_CONF_CURRENT_LIMIT:
+ *data = std_gvar_min_max_step(0.0, 2.55, 0.01);
break;
default:
return SR_ERR_NA;
}
- return ret;
-}
-
-static int dev_acquisition_start(const struct sr_dev_inst *sdi)
-{
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- return SR_OK;
-}
-
-static int dev_acquisition_stop(struct sr_dev_inst *sdi)
-{
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
return SR_OK;
}
.cleanup = std_cleanup,
.scan = scan,
.dev_list = std_dev_list,
- .dev_clear = NULL,
+ .dev_clear = std_dev_clear,
.config_get = NULL,
.config_set = config_set,
.config_list = config_list,
.dev_open = std_serial_dev_open,
.dev_close = std_serial_dev_close,
- .dev_acquisition_start = dev_acquisition_start,
- .dev_acquisition_stop = dev_acquisition_stop,
+ .dev_acquisition_start = std_dummy_dev_acquisition_start,
+ .dev_acquisition_stop = std_dummy_dev_acquisition_stop,
.context = NULL,
};
SR_REGISTER_DEV_DRIVER(conrad_digi_35_cpu_driver_info);