]> sigrok.org Git - libsigrok.git/blobdiff - sigrok.h
Demo: Obery samplerate and fix race condition.
[libsigrok.git] / sigrok.h
index cf5cb61f2dd1e18be897551611233f9550744c07..2f31a34b252421555525f752529b247da4e96da5 100644 (file)
--- a/sigrok.h
+++ b/sigrok.h
 #include <glib.h>
 #include <libusb.h>
 
-/* Returned status/error codes */
-#define SIGROK_STATUS_DISABLED         0
-#define SIGROK_OK                      1
-#define SIGROK_NOK                     2
-#define SIGROK_ERR_BADVALUE            20
+/*
+ * Status/error codes returned by libsigrok functions.
+ *
+ * All possible return codes of libsigrok functions must be listed here.
+ * Functions should never return hardcoded numbers as status, but rather
+ * use these #defines instead. All error codes are negative numbers.
+ *
+ * The error codes are globally unique in libsigrok, i.e. if one of the
+ * libsigrok functions returns a "malloc error" it must be exactly the same
+ * return value as used by all other functions to indicate "malloc error".
+ * There must be no functions which indicate two different errors via the
+ * same return code.
+ *
+ * Also, for compatibility reasons, no defined return codes are ever removed
+ * or reused for different #defines later. You can only add new #defines and
+ * return codes, but never remove or redefine existing ones.
+ */
+#define SIGROK_OK                 0 /* No error */
+#define SIGROK_ERR               -1 /* Generic/unspecified error */
+#define SIGROK_ERR_MALLOC        -2 /* Malloc/calloc/realloc error */
+#define SIGROK_ERR_SAMPLERATE    -3 /* Incorrect samplerate */
+
+/* limited by uint64_t */
+#define MAX_NUM_PROBES 64
+#define MAX_PROBENAME_LEN 32
 
 /* Handy little macros */
-#define KHZ(n) (n * 1000)
-#define MHZ(n) (n * 1000000)
-#define GHZ(n) (n * 1000000000)
+#define KHZ(n) ((n) * 1000)
+#define MHZ(n) ((n) * 1000000)
+#define GHZ(n) ((n) * 1000000000)
 
-/* Data types, used by hardware plugins for set_configuration() */
+#define HZ_TO_NS(n) (1000000000 / (n))
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+#endif
+
+#ifndef ARRAY_AND_SIZE
+#define ARRAY_AND_SIZE(a) (a), ARRAY_SIZE(a)
+#endif
+
+typedef int (*receive_data_callback) (int fd, int revents, void *user_data);
+
+/* Data types used by hardware plugins for set_configuration() */
 enum {
        T_UINT64,
        T_CHAR,
@@ -55,26 +87,20 @@ struct protocol {
        int stackindex;
 };
 
-/*
- * datafeed
- */
-
 /* datafeed_packet.type values */
 enum {
        DF_HEADER,
        DF_END,
        DF_TRIGGER,
-       DF_LOGIC8,
-       DF_LOGIC16,
-       DF_LOGIC24,
-       DF_LOGIC32,
-       DF_LOGIC48,
-       DF_LOGIC64,
+       DF_LOGIC,
+       DF_ANALOG,
+       DF_PD,
 };
 
 struct datafeed_packet {
        uint16_t type;
-       uint16_t length;
+       uint64_t length;
+       uint16_t unitsize;
        void *payload;
 };
 
@@ -83,12 +109,24 @@ struct datafeed_header {
        struct timeval starttime;
        uint64_t samplerate;
        int protocol_id;
-       int num_probes;
+       int num_analog_probes;
+       int num_logic_probes;
+};
+
+struct input {
+       struct input_format *format;
+       char *param;
+       struct device *vdevice;
+};
+
+struct input_format {
+       char *extension;
+       char *description;
+       int (*format_match) (const char *filename);
+       int (*init) (struct input *in);
+       int (*loadfile) (struct input *in, const char *filename);
 };
 
-/*
- * output
- */
 struct output {
        struct output_format *format;
        struct device *device;
@@ -99,20 +137,14 @@ struct output {
 struct output_format {
        char *extension;
        char *description;
-       void (*init) (struct output *o);
+       int df_type;
+       int (*init) (struct output *o);
        int (*data) (struct output *o, char *data_in, uint64_t length_in,
                     char **data_out, uint64_t *length_out);
        int (*event) (struct output *o, int event_type, char **data_out,
                      uint64_t *length_out);
 };
 
-struct output_format **output_list(void);
-int filter_probes(int in_unitsize, int out_unitsize, int *probelist,
-                 char *data_in, uint64_t length_in, char **data_out,
-                 uint64_t *length_out);
-
-/*--- analyzer.c ------------------------------------------------------------*/
-
 struct analyzer {
        char *name;
        char *filename;
@@ -122,34 +154,16 @@ struct analyzer {
         */
 };
 
-/*--- backend.c -------------------------------------------------------------*/
-
-int sigrok_init(void);
-void sigrok_cleanup(void);
-
-/*--- datastore.c -----------------------------------------------------------*/
-
 /* Size of a chunk in units */
 #define DATASTORE_CHUNKSIZE 512000
 
 struct datastore {
        /* Size in bytes of the number of units stored in this datastore */
        int ds_unitsize;
-       unsigned int num_units;
+       unsigned int num_units; /* TODO: uint64_t */
        GSList *chunklist;
 };
 
-struct datastore *datastore_new(int unitsize);
-void datastore_destroy(struct datastore *ds);
-void datastore_put(struct datastore *ds, void *data, unsigned int length,
-                  int in_unitsize, int *probelist);
-
-/*--- debug.c ---------------------------------------------------------------*/
-
-void hexdump(unsigned char *address, int length);
-
-/*--- device.c --------------------------------------------------------------*/
-
 /*
  * This represents a generic device connected to the system.
  * For device-specific information, ask the plugin. The plugin_index refers
@@ -167,8 +181,14 @@ struct device {
        struct datastore *datastore;
 };
 
+enum {
+       PROBE_TYPE_LOGIC,
+       PROBE_TYPE_ANALOG,
+};
+
 struct probe {
        int index;
+       int type;
        gboolean enabled;
        char *name;
        char *trigger;
@@ -176,32 +196,22 @@ struct probe {
 
 extern GSList *devices;
 
-void device_scan(void);
-void device_close_all(void);
-GSList *device_list(void);
-struct device *device_new(struct device_plugin *plugin, int plugin_index);
-void device_clear(struct device *device);
-void device_destroy(struct device *dev);
-
-void device_probe_clear(struct device *device, int probenum);
-void device_probe_add(struct device *device, char *name);
-struct probe *probe_find(struct device *device, int probenum);
-void device_probe_name(struct device *device, int probenum, char *name);
-
-void device_trigger_clear(struct device *device);
-void device_trigger_set(struct device *device, int probenum, char *trigger);
-
-/*--- hwplugin.c ------------------------------------------------------------*/
-
 /* Hardware plugin capabilities */
 enum {
-       HWCAP_DUMMY,            // used to terminate lists
+       HWCAP_DUMMY,             /* Used to terminate lists */
+       /* device classes */
        HWCAP_LOGIC_ANALYZER,
-       HWCAP_SAMPLERATE,       // change samplerate
-       HWCAP_PROBECONFIG,      // configure probe mask
-       HWCAP_CAPTURE_RATIO,    // set pre-trigger / post-trigger ratio
-       HWCAP_LIMIT_MSEC,       // set a time limit for sample acquisition
-       HWCAP_LIMIT_SAMPLES,    // set a limit on number of samples
+
+       /* device options */
+       HWCAP_SAMPLERATE,        /* Change samplerate */
+       HWCAP_PROBECONFIG,       /* Configure probe mask */
+       HWCAP_CAPTURE_RATIO,     /* Set pre/post-trigger capture ratio */
+       HWCAP_PATTERN_MODE,      /* Pattern generator mode */
+
+       /* acquisition modes */
+       HWCAP_LIMIT_MSEC,        /* Set a time limit for sample acquisition */
+       HWCAP_LIMIT_SAMPLES,     /* Set a limit on number of samples */
+       HWCAP_CONTINUOUS,
 };
 
 struct hwcap_option {
@@ -218,6 +228,7 @@ struct sigrok_device_instance {
        char *vendor;
        char *model;
        char *version;
+       void *priv;
        union {
                struct usb_device_instance *usb;
                struct serial_device_instance *serial;
@@ -269,10 +280,13 @@ enum {
        DI_TRIGGER_TYPES,
        /* The currently set samplerate in Hz (uint64_t) */
        DI_CUR_SAMPLERATE,
+       /* Supported pattern generator modes */
+       DI_PATTERNMODES,
 };
 
-/* a device supports either a range of samplerates with steps of a given
- * granularity, or is limited to a set of defined samplerates. use either
+/*
+ * A device supports either a range of samplerates with steps of a given
+ * granularity, or is limited to a set of defined samplerates. Use either
  * step or list, but not both.
  */
 struct samplerates {
@@ -283,13 +297,13 @@ struct samplerates {
 };
 
 struct device_plugin {
-       /* plugin-specific */
+       /* Plugin-specific */
        char *name;
        int api_version;
        int (*init) (char *deviceinfo);
        void (*cleanup) (void);
 
-       /* device-specific */
+       /* Device-specific */
        int (*open) (int device_index);
        void (*close) (int device_index);
        void *(*get_device_info) (int device_index, int device_info_id);
@@ -307,76 +321,16 @@ struct gsource_fd {
        GSource *timeout_source;
 };
 
-typedef int (*receive_data_callback) (int fd, int revents, void *user_data);
-
-int load_hwplugins(void);
-GSList *list_hwplugins(void);
-
-/* Generic device instances */
-struct sigrok_device_instance *sigrok_device_instance_new(int index,
-       int status, char *vendor, char *model, char *version);
-struct sigrok_device_instance *get_sigrok_device_instance(GSList *device_instances, int device_index);
-void sigrok_device_instance_free(struct sigrok_device_instance *sdi);
-
-/* USB-specific instances */
-struct usb_device_instance *usb_device_instance_new(uint8_t bus,
-               uint8_t address, struct libusb_device_handle *hdl);
-void usb_device_instance_free(struct usb_device_instance *usb);
-
-/* Serial-specific instances */
-struct serial_device_instance *serial_device_instance_new(char *port, int fd);
-void serial_device_instance_free(struct serial_device_instance *serial);
-
-int find_hwcap(int *capabilities, int hwcap);
-struct hwcap_option *find_hwcap_option(int hwcap);
-void source_remove(int fd);
-void source_add(int fd, int events, int timeout, receive_data_callback rcv_cb, void *user_data);
-
-/*--- session.c -------------------------------------------------------------*/
-
-typedef void (*source_callback_remove) (int fd);
-typedef void (*source_callback_add) (int fd, int events, int timeout,
-               receive_data_callback callback, void *user_data);
-typedef void (*datafeed_callback) (struct device *device,
-                                struct datafeed_packet *packet);
-
 struct session {
        /* List of struct device* */
        GSList *devices;
        /* List of struct analyzer* */
        GSList *analyzers;
-       /* datafeed callbacks */
+       /* Datafeed callbacks */
        GSList *datafeed_callbacks;
        GTimeVal starttime;
 };
 
-/* Session setup */
-struct session *session_load(char *filename);
-struct session *session_new(void);
-void session_destroy(void);
-void session_device_clear(void);
-int session_device_add(struct device *device);
-
-/* Protocol analyzers setup */
-void session_pa_clear(void);
-void session_pa_add(struct analyzer *pa);
-
-/* Datafeed setup */
-void session_datafeed_callback_clear(void);
-void session_datafeed_callback_add(datafeed_callback callback);
-
-/* Session control */
-int session_start(void);
-void session_stop(void);
-void session_bus(struct device *device, struct datafeed_packet *packet);
-void make_metadata(char *filename);
-int session_save(char *filename);
-
-/*--- hwcommon.c ------------------------------------------------------------*/
-
-int ezusb_reset(struct libusb_device_handle *hdl, int set_clear);
-int ezusb_install_firmware(libusb_device_handle *hdl, char *filename);
-
-GSList *list_serial_ports(void);
+#include "sigrok-proto.h"
 
 #endif