int nonblocking;
#ifdef _WIN32
HANDLE hdl;
+ OVERLAPPED write_ovl;
+ BYTE pending_byte;
+ BOOL writing;
#else
int fd;
#endif
#define RETURN_FAIL(msg) do { DEBUG_FAIL(msg); return SP_ERR_FAIL; } while (0)
#define RETURN_VALUE(fmt, x) do { DEBUG("%s returning " fmt, __func__, x); return x; } while (0)
#define SET_ERROR(val, err, msg) do { DEBUG_ERROR(err, msg); val = err; } while (0)
-#define SET_FAIL(val, msg) do { DEBUG_FAIL(msg); val = err; } while (0)
+#define SET_FAIL(val, msg) do { DEBUG_FAIL(msg); val = SP_ERR_FAIL; } while (0)
#define TRACE(fmt, ...) DEBUG("%s(" fmt ") called", __func__, ##__VA_ARGS__)
#define TRY(x) do { int ret = x; if (ret != SP_OK) RETURN_CODEVAL(ret); } while (0)
#ifdef _WIN32
DWORD desired_access = 0, flags_and_attributes = 0;
+ COMMTIMEOUTS timeouts;
char *escaped_port_name;
/* Prefix port name with '\\.\' to work with ports above COM9. */
if (port->hdl == INVALID_HANDLE_VALUE)
RETURN_FAIL("CreateFile() failed");
+
+ /* All timeouts disabled. */
+ timeouts.ReadIntervalTimeout = 0;
+ timeouts.ReadTotalTimeoutMultiplier = 0;
+ timeouts.ReadTotalTimeoutConstant = 0;
+ timeouts.WriteTotalTimeoutMultiplier = 0;
+ timeouts.WriteTotalTimeoutConstant = 0;
+
+ if (port->nonblocking) {
+ /* Set read timeout such that all reads return immediately. */
+ timeouts.ReadIntervalTimeout = MAXDWORD;
+ /* Prepare OVERLAPPED structure for non-blocking writes. */
+ memset(&port->write_ovl, 0, sizeof(port->write_ovl));
+ if (!(port->write_ovl.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL))) {
+ sp_close(port);
+ RETURN_FAIL("CreateEvent() failed");
+ }
+ port->writing = FALSE;
+ }
+
+ if (SetCommTimeouts(port->hdl, &timeouts) == 0) {
+ sp_close(port);
+ RETURN_FAIL("SetCommTimeouts() failed");
+ }
#else
int flags_local = 0;
struct port_data data;
RETURN_CODEVAL(ret);
}
- /* Turn off all serial port cooking. */
- data.term.c_iflag &= ~(ISTRIP | INLCR | ICRNL);
- data.term.c_oflag &= ~(ONLCR | OCRNL | ONOCR);
-#if !defined(__FreeBSD__) && !defined(__OpenBSD__) && !defined(__NetBSD__)
+ /* Turn off all fancy termios tricks, give us a raw channel. */
+ data.term.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IUCLC|IMAXBEL);
+ data.term.c_oflag &= ~(OPOST|OLCUC|ONLCR|OCRNL|ONOCR|ONLRET|NLDLY|CRDLY|TABDLY|BSDLY|VTDLY|FFDLY);
+#ifdef OFILL
data.term.c_oflag &= ~OFILL;
#endif
- /* Disable canonical mode, and don't echo input characters. */
- data.term.c_lflag &= ~(ICANON | ECHO);
+ data.term.c_lflag &= ~(ISIG|ICANON|ECHO|IEXTEN);
+ data.term.c_cc[VMIN] = 0;
+ data.term.c_cc[VTIME] = 0;
- /* Ignore modem status lines; enable receiver */
- data.term.c_cflag |= (CLOCAL | CREAD);
+ /* Ignore modem status lines; enable receiver; leave control lines alone on close. */
+ data.term.c_cflag |= (CLOCAL | CREAD | HUPCL);
ret = set_config(port, &data, &config);
if (CloseHandle(port->hdl) == 0)
RETURN_FAIL("CloseHandle() failed");
port->hdl = INVALID_HANDLE_VALUE;
+ if (port->nonblocking) {
+ /* Close event handle created for overlapped writes. */
+ if (CloseHandle(port->write_ovl.hEvent) == 0)
+ RETURN_FAIL("CloseHandle() failed");
+ }
#else
/* Returns 0 upon success, -1 upon failure. */
if (close(port->fd) == -1)
DEBUG("Writing up to %d bytes to port %s", count, port->name);
+ if (count == 0)
+ RETURN_VALUE("0", 0);
+
#ifdef _WIN32
DWORD written = 0;
+ BYTE *ptr = (BYTE *) buf;
+
+ if (port->nonblocking) {
+ /* Non-blocking write. */
+
+ /* Check whether previous write is complete. */
+ if (port->writing) {
+ if (HasOverlappedIoCompleted(&port->write_ovl)) {
+ DEBUG("Previous write completed");
+ port->writing = 0;
+ } else {
+ DEBUG("Previous write not complete");
+ /* Can't take a new write until the previous one finishes. */
+ RETURN_VALUE("0", 0);
+ }
+ }
+
+ /* Keep writing data until the OS has to actually start an async IO for it.
+ * At that point we know the buffer is full. */
+ while (written < count)
+ {
+ /* Copy first byte of user buffer. */
+ port->pending_byte = *ptr++;
+
+ /* Start asynchronous write. */
+ if (WriteFile(port->hdl, &port->pending_byte, 1, NULL, &port->write_ovl) == 0) {
+ if (GetLastError() == ERROR_IO_PENDING) {
+ DEBUG("Asynchronous write started");
+ port->writing = 1;
+ RETURN_VALUE("%d", ++written);
+ } else {
+ /* Actual failure of some kind. */
+ RETURN_FAIL("WriteFile() failed");
+ }
+ } else {
+ DEBUG("Single byte written immediately.");
+ written++;
+ }
+ }
+
+ DEBUG("All bytes written immediately.");
+
+ } else {
+ /* Blocking write. */
+ if (WriteFile(port->hdl, buf, count, &written, NULL) == 0) {
+ RETURN_FAIL("WriteFile() failed");
+ }
+ }
- /* Returns non-zero upon success, 0 upon failure. */
- if (WriteFile(port->hdl, buf, count, &written, NULL) == 0)
- RETURN_FAIL("WriteFile() failed");
RETURN_VALUE("%d", written);
#else
/* Returns the number of bytes written, or -1 upon failure. */
case NOPARITY:
config->parity = SP_PARITY_NONE;
break;
+ case ODDPARITY:
+ config->parity = SP_PARITY_ODD;
+ break;
case EVENPARITY:
config->parity = SP_PARITY_EVEN;
break;
- case ODDPARITY:
- config->parity = SP_PARITY_ODD;
+ case MARKPARITY:
+ config->parity = SP_PARITY_MARK;
+ break;
+ case SPACEPARITY:
+ config->parity = SP_PARITY_SPACE;
break;
default:
config->parity = -1;
config->parity = SP_PARITY_NONE;
else if (!(data->term.c_cflag & PARENB) || (data->term.c_iflag & IGNPAR))
config->parity = -1;
+ else if (data->term.c_cflag & CMSPAR)
+ config->parity = (data->term.c_cflag & PARODD) ? SP_PARITY_MARK : SP_PARITY_SPACE;
else
config->parity = (data->term.c_cflag & PARODD) ? SP_PARITY_ODD : SP_PARITY_EVEN;
case SP_PARITY_NONE:
data->dcb.Parity = NOPARITY;
break;
+ case SP_PARITY_ODD:
+ data->dcb.Parity = ODDPARITY;
+ break;
case SP_PARITY_EVEN:
data->dcb.Parity = EVENPARITY;
break;
- case SP_PARITY_ODD:
- data->dcb.Parity = ODDPARITY;
+ case SP_PARITY_MARK:
+ data->dcb.Parity = MARKPARITY;
+ break;
+ case SP_PARITY_SPACE:
+ data->dcb.Parity = SPACEPARITY;
break;
default:
RETURN_ERROR(SP_ERR_ARG, "Invalid parity setting");
if (config->parity >= 0) {
data->term.c_iflag &= ~IGNPAR;
- data->term.c_cflag &= ~(PARENB | PARODD);
+ data->term.c_cflag &= ~(PARENB | PARODD | CMSPAR);
switch (config->parity) {
case SP_PARITY_NONE:
data->term.c_iflag |= IGNPAR;
case SP_PARITY_ODD:
data->term.c_cflag |= PARENB | PARODD;
break;
+ case SP_PARITY_MARK:
+ data->term.c_cflag |= PARENB | PARODD | CMSPAR;
+ break;
+ case SP_PARITY_SPACE:
+ data->term.c_cflag |= PARENB | CMSPAR;
+ break;
default:
RETURN_ERROR(SP_ERR_ARG, "Invalid parity setting");
}