* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef LIBSIGROK_SIGROK_H
-#define LIBSIGROK_SIGROK_H
+#ifndef LIBSIGROK_LIBSIGROK_H
+#define LIBSIGROK_LIBSIGROK_H
#include <stdio.h>
#include <sys/time.h>
SR_T_KEYVALUE,
SR_T_UINT64_RANGE,
SR_T_DOUBLE_RANGE,
+ SR_T_INT32,
};
/** Value for sr_datafeed_packet.type. */
SR_MQFLAG_SPL_PCT_OVER_ALARM = 0x10000,
/** Time is duration (as opposed to epoch, ...). */
SR_MQFLAG_DURATION = 0x20000,
+ /** Device is in "avg" mode, averaging upon each new value. */
+ SR_MQFLAG_AVG = 0x40000,
};
-/** sigrok context (opaque). @see sr_init(), sr_exit(). */
+/**
+ * @struct sr_context
+ * Opaque structure representing a libsigrok context.
+ *
+ * None of the fields of this structure are meant to be accessed directly.
+ *
+ * @see sr_init(), sr_exit().
+ */
struct sr_context;
/** Packet in a sigrok data feed. */
/** Information on single probe. */
struct sr_probe {
- /** Number of probes, starting at 0. @deprecated The index field
- * will go: use g_slist_length(sdi->probes) instead. */
+ /** Number of probes, starting at 0. */
int index;
/** Probe type (SR_PROBE_LOGIC, ...) */
int type;
/** The device can measure energy consumption. */
SR_CONF_ENERGYMETER,
+ /** The device can demodulate signals. */
+ SR_CONF_DEMODULATOR,
+
+ /** Programmable power supply. */
+ SR_CONF_POWER_SUPPLY,
+
/*--- Driver scan options -------------------------------------------*/
/**
/** Logic low-high threshold range. */
SR_CONF_VOLTAGE_THRESHOLD,
- /** The device supports using a external clock. */
+ /** The device supports using an external clock. */
SR_CONF_EXTERNAL_CLOCK,
/**
*/
SR_CONF_SWAP,
+ /** Center frequency.
+ * The input signal is downmixed by this frequency before the ADC
+ * anti-aliasing filter.
+ */
+ SR_CONF_CENTER_FREQUENCY,
+
+ /** The device supports setting the number of logic probes. */
+ SR_CONF_NUM_LOGIC_PROBES,
+
+ /** The device supports setting the number of analog probes. */
+ SR_CONF_NUM_ANALOG_PROBES,
+
+ /** Output voltage. */
+ SR_CONF_OUTPUT_VOLTAGE,
+
+ /** Maximum output voltage. */
+ SR_CONF_OUTPUT_VOLTAGE_MAX,
+
+ /** Output current. */
+ SR_CONF_OUTPUT_CURRENT,
+
+ /** Maximum output current. */
+ SR_CONF_OUTPUT_CURRENT_MAX,
+
+ /** Enabling/disabling output. */
+ SR_CONF_OUTPUT_ENABLED,
+
+ /** Channel output configuration. */
+ SR_CONF_OUTPUT_CHANNEL,
+
+ /** Over-voltage protection (OVP) */
+ SR_CONF_OVER_VOLTAGE_PROTECTION,
+
+ /** Over-current protection (OCP) */
+ SR_CONF_OVER_CURRENT_PROTECTION,
+
+ /** Choice of clock edge for external clock ("r" or "f"). */
+ SR_CONF_CLOCK_EDGE,
+
/*--- Special stuff -------------------------------------------------*/
/** Scan options supported by the driver. */
/** The device supports specifying the capturefile unit size. */
SR_CONF_CAPTURE_UNITSIZE,
- /** The device supports setting the number of probes. */
- SR_CONF_CAPTURE_NUM_PROBES,
-
/** Power off the device. */
SR_CONF_POWER_OFF,
- /** Data source for acquisition. If not present, acquisition from
+ /**
+ * Data source for acquisition. If not present, acquisition from
* the device is always "live", i.e. acquisition starts when the
* frontend asks and the results are sent out as soon as possible.
*
* there is a choice. sr_config_list() returns those choices.
*
* In any case if a device has live acquisition capabilities, it
- * is always the default. */
+ * is always the default.
+ */
SR_CONF_DATA_SOURCE,
/*--- Acquisition modes ---------------------------------------------*/
SR_ST_STOPPING,
};
-/** Device driver data */
+/** Device driver data. See also http://sigrok.org/wiki/Hardware_driver_API . */
struct sr_dev_driver {
/* Driver-specific */
- /** Driver name */
+ /** Driver name. Lowercase a-z, 0-9 and dashes (-) only. */
char *name;
- /** Long name, e.g. device name. */
+ /** Long name. Verbose driver name shown to user. */
char *longname;
/** API version (currently 1). */
int api_version;
- /** Init driver */
+ /** Called when driver is loaded, e.g. program startup. */
int (*init) (struct sr_context *sr_ctx);
- /** Free driver */
+ /** Called before driver is unloaded.
+ * Driver must free all resouces held by it. */
int (*cleanup) (void);
- /** Scan for devices */
+ /** Scan for devices. Driver should do all initialisation required.
+ * Can be called several times, e.g. with different port options.
+ * \retval NULL Error or no devices found.
+ * \retval other GSList of a struct sr_dev_inst for each device.
+ * Must be freed by caller!
+ */
GSList *(*scan) (GSList *options);
- /** Get device list */
+ /** Get list of device instances the driver knows about.
+ * \returns NULL or GSList of a struct sr_dev_inst for each device.
+ * Must not be freed by caller!
+ */
GSList *(*dev_list) (void);
+ /** Clear list of devices the driver knows about. */
int (*dev_clear) (void);
+ /** Query value of a configuration key in driver or given device instance.
+ * @see sr_config_get().
+ */
int (*config_get) (int id, GVariant **data,
const struct sr_dev_inst *sdi,
const struct sr_probe_group *probe_group);
+ /** Set value of a configuration key in driver or a given device instance.
+ * @see sr_config_set(). */
int (*config_set) (int id, GVariant *data,
const struct sr_dev_inst *sdi,
const struct sr_probe_group *probe_group);
+ /** Probe status change.
+ * @see sr_dev_probe_enable(), sr_dev_trigger_set(). */
+ int (*config_probe_set) (const struct sr_dev_inst *sdi,
+ struct sr_probe *probe, unsigned int changes);
+ /** Apply configuration settings to the device hardware.
+ * @see sr_config_commit().*/
+ int (*config_commit) (const struct sr_dev_inst *sdi);
+ /** List all possible values for a configuration key in a device instance.
+ * @see sr_config_list().
+ */
int (*config_list) (int info_id, GVariant **data,
const struct sr_dev_inst *sdi,
const struct sr_probe_group *probe_group);
int (*dev_open) (struct sr_dev_inst *sdi);
/** Close device */
int (*dev_close) (struct sr_dev_inst *sdi);
- /** Start data aquisition. */
+ /** Begin data aquisition on the specified device. */
int (*dev_acquisition_start) (const struct sr_dev_inst *sdi,
void *cb_data);
- /** Stop data aquisition. */
+ /** End data aquisition on the specified device. */
int (*dev_acquisition_stop) (struct sr_dev_inst *sdi,
void *cb_data);
/* Dynamic */
- /** Device driver private data */
+ /** Device driver private data. Initialized by init(). */
void *priv;
};
/**
+ * @struct sr_session
+ *
* Opaque data structure representing a libsigrok session. None of the fields
* of this structure are meant to be accessed directly.
*/
projects / libsigrok.git / blobdiff