SR_DF_TRIGGER,
/** Payload is struct sr_datafeed_logic. */
SR_DF_LOGIC,
- /** Payload is struct sr_datafeed_analog_old. */
- SR_DF_ANALOG_OLD,
/** Beginning of frame. No payload. */
SR_DF_FRAME_BEGIN,
/** End of frame. No payload. */
SR_MQFLAG_REFERENCE = 0x80000,
/** Unstable value (hasn't settled yet). */
SR_MQFLAG_UNSTABLE = 0x100000,
+ /** Measurement is four wire (e.g. Kelvin connection). */
+ SR_MQFLAG_FOUR_WIRE = 0x200000,
/*
* Update mq_strings[] (analog.c) and fancyprint() (output/analog.c)
void *data;
};
-/** Analog datafeed payload for type SR_DF_ANALOG_OLD. */
-struct sr_datafeed_analog_old {
- /** The channels for which data is included in this packet. */
- GSList *channels;
- /** Number of samples in data */
- int num_samples;
- /** Measured quantity (voltage, current, temperature, and so on).
- * Use SR_MQ_VOLTAGE, ... */
- int mq;
- /** Unit in which the MQ is measured. Use SR_UNIT_VOLT, ... */
- int unit;
- /** Bitmap with extra information about the MQ. Use SR_MQFLAG_AC, ... */
- uint64_t mqflags;
- /** The analog value(s). The data is interleaved according to
- * the channels list. */
- float *data;
-};
-
/** Analog datafeed payload for type SR_DF_ANALOG. */
struct sr_datafeed_analog {
void *data;
/** Generic option struct used by various subsystems. */
struct sr_option {
/* Short name suitable for commandline usage, [a-z0-9-]. */
- char *id;
+ const char *id;
/* Short name suitable for GUI usage, can contain UTF-8. */
- char *name;
+ const char *name;
/* Description of the option, in a sentence. */
- char *desc;
+ const char *desc;
/* Default value for this option. */
GVariant *def;
/* List of possible values, if this is an option with few values. */
/** Data type like SR_T_STRING, etc if applicable. */
int datatype;
/** Short, lowercase ID string, e.g. "serialcomm", "voltage". */
- char *id;
+ const char *id;
/** Full capitalized name, e.g. "Serial communication". */
- char *name;
+ const char *name;
/** Verbose description (unused currently). */
- char *description;
+ const char *description;
};
-#define SR_CONF_GET (1 << 31)
-#define SR_CONF_SET (1 << 30)
-#define SR_CONF_LIST (1 << 29)
-#define SR_CONF_MASK 0x1fffffff
+/** Configuration capabilities. */
+enum sr_configcap {
+ /** Value can be read. */
+ SR_CONF_GET = (1 << 31),
+ /** Value can be written. */
+ SR_CONF_SET = (1 << 30),
+ /** Possible values can be enumerated. */
+ SR_CONF_LIST = (1 << 29),
+};
/** Configuration keys */
enum sr_configkey {
/** Over-temperature protection (OTP) active. */
SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
- /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+ /** Under-voltage condition. */
+ SR_CONF_UNDER_VOLTAGE_CONDITION,
- /*--- Special stuff -------------------------------------------------*/
+ /** Under-voltage condition active. */
+ SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE,
- /** Scan options supported by the driver. */
- SR_CONF_SCAN_OPTIONS = 40000,
+ /** Trigger level. */
+ SR_CONF_TRIGGER_LEVEL,
- /** Device options for a particular device. */
- SR_CONF_DEVICE_OPTIONS,
+ /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
+ /*--- Special stuff -------------------------------------------------*/
/** Session filename. */
- SR_CONF_SESSIONFILE,
+ SR_CONF_SESSIONFILE = 40000,
/** The device supports specifying a capturefile to inject. */
SR_CONF_CAPTUREFILE,
/** The device supports setting a probe factor. */
SR_CONF_PROBE_FACTOR,
+ /** Number of powerline cycles for ADC integration time. */
+ SR_CONF_ADC_POWERLINE_CYCLES,
+
/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
/*--- Acquisition modes, sample limiting ----------------------------*/
struct sr_dev_driver {
/* Driver-specific */
/** Driver name. Lowercase a-z, 0-9 and dashes (-) only. */
- char *name;
+ const char *name;
/** Long name. Verbose driver name shown to user. */
- char *longname;
+ const char *longname;
/** API version (currently 1). */
int api_version;
/** Called when driver is loaded, e.g. program startup. */
/** Close device */
int (*dev_close) (struct sr_dev_inst *sdi);
/** Begin data acquisition on the specified device. */
- int (*dev_acquisition_start) (const struct sr_dev_inst *sdi,
- void *cb_data);
+ int (*dev_acquisition_start) (const struct sr_dev_inst *sdi);
/** End data acquisition on the specified device. */
- int (*dev_acquisition_stop) (struct sr_dev_inst *sdi,
- void *cb_data);
+ int (*dev_acquisition_stop) (struct sr_dev_inst *sdi);
/* Dynamic */
/** Device driver context, considered private. Initialized by init(). */