/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
- * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define SERIALCOMM "115200/8n1"
-static const int hwopts[] = {
+static const int32_t hwopts[] = {
SR_CONF_CONN,
SR_CONF_SERIALCOMM,
- 0,
};
-static const int hwcaps[] = {
+static const int32_t hwcaps[] = {
SR_CONF_LOGIC_ANALYZER,
SR_CONF_SAMPLERATE,
+ SR_CONF_TRIGGER_TYPE,
SR_CONF_CAPTURE_RATIO,
SR_CONF_LIMIT_SAMPLES,
SR_CONF_RLE,
- 0,
};
/* Probes are numbered 0-31 (on the PCB silkscreen). */
};
/* Default supported samplerates, can be overridden by device metadata. */
-static const struct sr_samplerates samplerates = {
- .low = SR_HZ(10),
- .high = SR_MHZ(200),
- .step = SR_HZ(1),
- .list = NULL,
+static const uint64_t samplerates[] = {
+ SR_HZ(10),
+ SR_MHZ(200),
+ SR_HZ(1),
};
SR_PRIV struct sr_dev_driver ols_driver_info;
src = l->data;
switch (src->key) {
case SR_CONF_CONN:
- conn = src->value;
+ conn = g_variant_get_string(src->data, NULL);
break;
case SR_CONF_SERIALCOMM:
- serialcomm = src->value;
+ serialcomm = g_variant_get_string(src->data, NULL);
break;
}
}
devc = sdi->priv;
} else {
/* Not an OLS -- some other board that uses the sump protocol. */
+ sr_info("Device does not support metadata.");
sdi = sr_dev_inst_new(0, SR_ST_INACTIVE,
"Sump", "Logic Analyzer", "v1.0");
sdi->driver = di;
- devc = ols_dev_new();
for (i = 0; i < 32; i++) {
if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
ols_probe_names[i])))
return 0;
sdi->probes = g_slist_append(sdi->probes, probe);
}
+ devc = ols_dev_new();
sdi->priv = devc;
}
- devc->serial = serial;
+ /* Configure samplerate and divider. */
+ if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
+ sr_dbg("Failed to set default samplerate (%"PRIu64").",
+ DEFAULT_SAMPLERATE);
+ /* Clear trigger masks, values and stages. */
+ ols_configure_probes(sdi);
+ sdi->inst_type = SR_INST_SERIAL;
+ sdi->conn = serial;
+
drvc->instances = g_slist_append(drvc->instances, sdi);
devices = g_slist_append(devices, sdi);
static GSList *hw_dev_list(void)
{
- struct drv_context *drvc;
-
- drvc = di->priv;
-
- return drvc->instances;
+ return ((struct drv_context *)(di->priv))->instances;
}
static int hw_dev_open(struct sr_dev_inst *sdi)
{
- struct dev_context *devc;
-
- devc = sdi->priv;
+ struct sr_serial_dev_inst *serial;
- if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK)
+ serial = sdi->conn;
+ if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return SR_ERR;
sdi->status = SR_ST_ACTIVE;
static int hw_dev_close(struct sr_dev_inst *sdi)
{
- struct dev_context *devc;
-
- devc = sdi->priv;
+ struct sr_serial_dev_inst *serial;
- if (devc->serial && devc->serial->fd != -1) {
- serial_close(devc->serial);
+ serial = sdi->conn;
+ if (serial && serial->fd != -1) {
+ serial_close(serial);
sdi->status = SR_ST_INACTIVE;
}
struct sr_dev_inst *sdi;
struct drv_context *drvc;
struct dev_context *devc;
+ struct sr_serial_dev_inst *serial;
int ret = SR_OK;
if (!(drvc = di->priv))
continue;
}
hw_dev_close(sdi);
- sr_serial_dev_inst_free(devc->serial);
+ serial = sdi->conn;
+ sr_serial_dev_inst_free(serial);
sr_dev_inst_free(sdi);
}
g_slist_free(drvc->instances);
return ret;
}
-static int config_get(int id, const void **data, const struct sr_dev_inst *sdi)
+static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
+ if (!sdi)
+ return SR_ERR_ARG;
+
+ devc = sdi->priv;
switch (id) {
case SR_CONF_SAMPLERATE:
- if (sdi) {
- devc = sdi->priv;
- *data = &devc->cur_samplerate;
- } else
- return SR_ERR;
+ *data = g_variant_new_uint64(devc->cur_samplerate);
+ break;
+ case SR_CONF_CAPTURE_RATIO:
+ *data = g_variant_new_uint64(devc->capture_ratio);
+ break;
+ case SR_CONF_LIMIT_SAMPLES:
+ *data = g_variant_new_uint64(devc->limit_samples);
+ break;
+ case SR_CONF_RLE:
+ *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE);
break;
default:
- return SR_ERR_ARG;
+ return SR_ERR_NA;
}
return SR_OK;
}
-static int config_set(int id, const void *value, const struct sr_dev_inst *sdi)
+static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
int ret;
- const uint64_t *tmp_u64;
-
- devc = sdi->priv;
+ uint64_t tmp_u64;
if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR;
+ return SR_ERR_DEV_CLOSED;
+
+ devc = sdi->priv;
switch (id) {
case SR_CONF_SAMPLERATE:
- ret = ols_set_samplerate(sdi, *(const uint64_t *)value,
- &samplerates);
+ tmp_u64 = g_variant_get_uint64(data);
+ if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
+ return SR_ERR_SAMPLERATE;
+ ret = ols_set_samplerate(sdi, g_variant_get_uint64(data));
break;
case SR_CONF_LIMIT_SAMPLES:
- tmp_u64 = value;
- if (*tmp_u64 < MIN_NUM_SAMPLES)
+ tmp_u64 = g_variant_get_uint64(data);
+ if (tmp_u64 < MIN_NUM_SAMPLES)
return SR_ERR;
- if (*tmp_u64 > devc->max_samples)
- sr_err("Sample limit exceeds hardware maximum.");
- devc->limit_samples = *tmp_u64;
- sr_info("Sample limit is %" PRIu64 ".", devc->limit_samples);
+ devc->limit_samples = tmp_u64;
ret = SR_OK;
break;
case SR_CONF_CAPTURE_RATIO:
- devc->capture_ratio = *(const uint64_t *)value;
+ devc->capture_ratio = g_variant_get_uint64(data);
if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
devc->capture_ratio = 0;
ret = SR_ERR;
ret = SR_OK;
break;
case SR_CONF_RLE:
- if (GPOINTER_TO_INT(value)) {
+ if (g_variant_get_boolean(data)) {
sr_info("Enabling RLE.");
devc->flag_reg |= FLAG_RLE;
+ } else {
+ sr_info("Disabling RLE.");
+ devc->flag_reg &= ~FLAG_RLE;
}
ret = SR_OK;
break;
default:
- ret = SR_ERR;
+ ret = SR_ERR_NA;
}
return ret;
}
-static int config_list(int key, const void **data, const struct sr_dev_inst *sdi)
+static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
{
+ GVariant *gvar;
+ GVariantBuilder gvb;
(void)sdi;
switch (key) {
case SR_CONF_SCAN_OPTIONS:
- *data = hwopts;
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
break;
case SR_CONF_DEVICE_OPTIONS:
- *data = hwcaps;
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
break;
case SR_CONF_SAMPLERATE:
- *data = &samplerates;
+ g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
+ gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
+ ARRAY_SIZE(samplerates), sizeof(uint64_t));
+ g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
+ *data = g_variant_builder_end(&gvb);
break;
case SR_CONF_TRIGGER_TYPE:
- *data = (char *)TRIGGER_TYPE;
+ *data = g_variant_new_string(TRIGGER_TYPE);
break;
default:
- return SR_ERR_ARG;
+ return SR_ERR_NA;
}
return SR_OK;
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
void *cb_data)
{
- struct sr_datafeed_packet *packet;
- struct sr_datafeed_header *header;
struct dev_context *devc;
+ struct sr_serial_dev_inst *serial;
uint32_t trigger_config[4];
uint32_t data;
uint16_t readcount, delaycount;
int num_channels;
int i;
- devc = sdi->priv;
-
if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR;
+ return SR_ERR_DEV_CLOSED;
+
+ devc = sdi->priv;
+ serial = sdi->conn;
if (ols_configure_probes(sdi) != SR_OK) {
sr_err("Failed to configure probes.");
readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4;
memset(trigger_config, 0, 16);
- trigger_config[devc->num_stages - 1] |= 0x08;
+ trigger_config[devc->num_stages] |= 0x08;
if (devc->trigger_mask[0]) {
delaycount = readcount * (1 - devc->capture_ratio / 100.0);
devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0,
reverse32(devc->trigger_mask[0])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0,
reverse32(devc->trigger_value[0])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0,
trigger_config[0]) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_1,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_1,
reverse32(devc->trigger_mask[1])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_1,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_1,
reverse32(devc->trigger_value[1])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_1,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_1,
trigger_config[1]) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_2,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_2,
reverse32(devc->trigger_mask[2])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_2,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_2,
reverse32(devc->trigger_value[2])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_2,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_2,
trigger_config[2]) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_3,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_3,
reverse32(devc->trigger_mask[3])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_3,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_3,
reverse32(devc->trigger_value[3])) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_3,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_3,
trigger_config[3]) != SR_OK)
return SR_ERR;
} else {
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0,
devc->trigger_mask[0]) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0,
devc->trigger_value[0]) != SR_OK)
return SR_ERR;
- if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
+ if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0,
0x00000008) != SR_OK)
return SR_ERR;
delaycount = readcount;
sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, "
"demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider,
devc->flag_reg & FLAG_DEMUX ? "on" : "off");
- if (send_longcommand(devc->serial, CMD_SET_DIVIDER,
+ if (send_longcommand(serial, CMD_SET_DIVIDER,
reverse32(devc->cur_samplerate_divider)) != SR_OK)
return SR_ERR;
/* Send sample limit and pre/post-trigger capture ratio. */
data = ((readcount - 1) & 0xffff) << 16;
data |= (delaycount - 1) & 0xffff;
- if (send_longcommand(devc->serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
+ if (send_longcommand(serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
return SR_ERR;
/* The flag register wants them here, and 1 means "disable channel". */
devc->flag_reg |= FLAG_FILTER;
devc->rle_count = 0;
data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
- if (send_longcommand(devc->serial, CMD_SET_FLAGS, data) != SR_OK)
+ if (send_longcommand(serial, CMD_SET_FLAGS, data) != SR_OK)
return SR_ERR;
/* Start acquisition on the device. */
- if (send_shortcommand(devc->serial, CMD_RUN) != SR_OK)
+ if (send_shortcommand(serial, CMD_RUN) != SR_OK)
return SR_ERR;
- sr_source_add(devc->serial->fd, G_IO_IN, -1, ols_receive_data,
- cb_data);
-
- if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
- sr_err("Datafeed packet malloc failed.");
- return SR_ERR_MALLOC;
- }
-
- if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
- sr_err("Datafeed header malloc failed.");
- g_free(packet);
- return SR_ERR_MALLOC;
- }
+ /* Reset all operational states. */
+ devc->num_transfers = devc->num_samples = devc->num_bytes = 0;
/* Send header packet to the session bus. */
- packet->type = SR_DF_HEADER;
- packet->payload = (unsigned char *)header;
- header->feed_version = 1;
- gettimeofday(&header->starttime, NULL);
- sr_session_send(cb_data, packet);
+ std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
- g_free(header);
- g_free(packet);
+ sr_source_add(serial->fd, G_IO_IN, -1, ols_receive_data, cb_data);
return SR_OK;
}
-/* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
/* Avoid compiler warnings. */
projects / libsigrok.git / blobdiff