* This file is part of the sigrok project.
*
* Copyright (C) 2011 Daniel Ribeiro <drwyrm@gmail.com>
+ * Copyright (C) 2012 Renato Caldas <rmsc@fe.up.pt>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef LINK_MSO19_H
-#define LINK_MSO19_H
+#ifndef LIBSIGROK_HARDWARE_LINK_MSO19_LINK_MSO19_H
+#define LIBSIGROK_HARDWARE_LINK_MSO19_LINK_MSO19_H
+
+/* Structure for the pattern generator state */
+struct mso_patgen {
+ /* Pattern generator clock config */
+ uint16_t clock;
+ /* Buffer start address */
+ uint16_t start;
+ /* Buffer end address */
+ uint16_t end;
+ /* Pattern generator config */
+ uint8_t config;
+ /* Samples buffer */
+ uint8_t buffer[1024];
+ /* Input/output configuration for the samples buffer (?)*/
+ uint8_t io[1024];
+ /* Number of loops for the pattern generator */
+ uint8_t loops;
+ /* Bit enable mask for the I/O lines */
+ uint8_t mask;
+};
+
+/* Data structure for the protocol trigger state */
+struct mso_prototrig {
+ /* Word match buffer */
+ uint8_t word[4];
+ /* Masks for the wordmatch buffer */
+ uint8_t mask[4];
+ /* SPI mode 0, 1, 2, 3. Set to 0 for I2C */
+ uint8_t spimode;
+};
-/* our private per-instance data */
+/* Private, per-device-instance driver context. */
struct mso {
/* info */
uint8_t hwmodel;
uint16_t dac_offset;
uint16_t offset_range;
/* register cache */
- uint8_t ctlbase;
- uint8_t slowmode;
+ uint8_t ctlbase1;
+ uint8_t ctlbase2;
/* state */
uint8_t la_threshold;
uint64_t cur_rate;
uint8_t dso_probe_attn;
uint8_t trigger_chan;
uint8_t trigger_slope;
- uint8_t trigger_spimode;
uint8_t trigger_outsrc;
uint8_t trigger_state;
uint8_t la_trigger;
uint8_t la_trigger_mask;
double dso_trigger_voltage;
uint16_t dso_trigger_width;
- gpointer session_id;
+ struct mso_prototrig protocol_trigger;
+ void *session_dev_id;
uint16_t buffer_n;
char buffer[4096];
};
const char mso_head[] = { 0x40, 0x4c, 0x44, 0x53, 0x7e };
const char mso_foot[] = { 0x7e };
-/* registers */
+/* bank agnostic registers */
+#define REG_CTL2 15
+
+/* bank 0 registers */
#define REG_BUFFER 1
#define REG_TRIGGER 2
#define REG_CLKRATE1 9
#define REG_CLKRATE2 10
#define REG_DAC1 12
#define REG_DAC2 13
-#define REG_CTL 14
+/* possibly bank agnostic: */
+#define REG_CTL1 14
+
+/* bank 2 registers (SPI/I2C protocol trigger) */
+#define REG_PT_WORD(x) (x)
+#define REG_PT_MASK(x) (x+4)
+#define REG_PT_SPIMODE 8
-/* bits */
-#define BIT_CTL_RESETFSM (1 << 0)
-#define BIT_CTL_ARM (1 << 1)
-#define BIT_CTL_ADC_UNKNOWN4 (1 << 4) /* adc enable? */
-#define BIT_CTL_RESETADC (1 << 6)
-#define BIT_CTL_LED (1 << 7)
+/* bits - REG_CTL1 */
+#define BIT_CTL1_RESETFSM (1 << 0)
+#define BIT_CTL1_ARM (1 << 1)
+#define BIT_CTL1_ADC_UNKNOWN4 (1 << 4) /* adc enable? */
+#define BIT_CTL1_RESETADC (1 << 6)
+#define BIT_CTL1_LED (1 << 7)
+
+/* bits - REG_CTL2 */
+#define BITS_CTL2_BANK(x) (x & 0x3)
+#define BIT_CTL2_SLOWMODE (1 << 5)
struct rate_map {
uint32_t rate;
};
static struct rate_map rate_map[] = {
- { MHZ(200), 0x0205, 0 },
- { MHZ(100), 0x0105, 0 },
- { MHZ(50), 0x0005, 0 },
- { MHZ(20), 0x0303, 0 },
- { MHZ(10), 0x0308, 0 },
- { MHZ(5), 0x030c, 0 },
- { MHZ(2), 0x0330, 0 },
- { MHZ(1), 0x0362, 0 },
- { KHZ(500), 0x03c6, 0 },
- { KHZ(200), 0x07f2, 0 },
- { KHZ(100), 0x0fe6, 0 },
- { KHZ(50), 0x1fce, 0 },
- { KHZ(20), 0x4f86, 0 },
- { KHZ(10), 0x9f0e, 0 },
- { KHZ(5), 0x03c7, 0x20 },
- { KHZ(2), 0x07f3, 0x20 },
- { KHZ(1), 0x0fe7, 0x20 },
+ { SR_MHZ(200), 0x0205, 0 },
+ { SR_MHZ(100), 0x0105, 0 },
+ { SR_MHZ(50), 0x0005, 0 },
+ { SR_MHZ(20), 0x0303, 0 },
+ { SR_MHZ(10), 0x0308, 0 },
+ { SR_MHZ(5), 0x030c, 0 },
+ { SR_MHZ(2), 0x0330, 0 },
+ { SR_MHZ(1), 0x0362, 0 },
+ { SR_KHZ(500), 0x03c6, 0 },
+ { SR_KHZ(200), 0x07f2, 0 },
+ { SR_KHZ(100), 0x0fe6, 0 },
+ { SR_KHZ(50), 0x1fce, 0 },
+ { SR_KHZ(20), 0x4f86, 0 },
+ { SR_KHZ(10), 0x9f0e, 0 },
+ { SR_KHZ(5), 0x03c7, 0x20 },
+ { SR_KHZ(2), 0x07f3, 0x20 },
+ { SR_KHZ(1), 0x0fe7, 0x20 },
{ 500, 0x1fcf, 0x20 },
{ 200, 0x4f87, 0x20 },
{ 100, 0x9f0f, 0x20 },
};
/* FIXME: Determine corresponding voltages */
-uint16_t la_threshold_map[] = {
+static uint16_t la_threshold_map[] = {
0x8600,
0x8770,
0x88ff,
0x8eff,
0x8fff,
};
-#endif
+#endif