return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error opening port: %s.", error);
+ sr_err("Error opening port (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
-#ifndef _WIN32
- sp_get_port_handle(serial->data, &serial->fd);
-#endif
-
if (serial->serialcomm)
return serial_set_paramstr(serial, serial->serialcomm);
else
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot close unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot close unopened serial port %s.", serial->port);
return SR_ERR;
}
- sr_spew("Closing serial port %s (fd %d).", serial->port, serial->fd);
+ sr_spew("Closing serial port %s.", serial->port);
ret = sp_close(serial->data);
- sp_free_port(serial->data);
switch (ret) {
case SP_ERR_ARG:
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error closing port: %s.", error);
+ sr_err("Error closing port (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
- serial->fd = -1;
+ sp_free_port(serial->data);
+ serial->data = NULL;
return SR_OK;
}
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot flush unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot flush unopened serial port %s.", serial->port);
return SR_ERR;
}
- sr_spew("Flushing serial port %s (fd %d).", serial->port, serial->fd);
+ sr_spew("Flushing serial port %s.", serial->port);
ret = sp_flush(serial->data, SP_BUF_BOTH);
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error flushing port: %s.", error);
+ sr_err("Error flushing port (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot use unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot use unopened serial port %s.", serial->port);
return SR_ERR;
}
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Write error: %s.", error);
+ sr_err("Write error (%d): %s.", sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
- sr_spew("Wrote %d/%d bytes (fd %d).", ret, count, serial->fd);
+ sr_spew("Wrote %d/%d bytes.", ret, count);
return ret;
}
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot use unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot use unopened serial port %s.", serial->port);
return SR_ERR;
}
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Read error: %s.", error);
+ sr_err("Read error (%d): %s.", sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
if (ret > 0)
- sr_spew("Read %d/%d bytes (fd %d).", ret, count, serial->fd);
+ sr_spew("Read %d/%d bytes.", ret, count);
return ret;
}
* Set serial parameters for the specified serial port.
*
* @param serial Previously initialized serial port structure.
- * @param baudrate The baudrate to set.
- * @param bits The number of data bits to use.
- * @param parity The parity setting to use (0 = none, 1 = even, 2 = odd).
- * @param stopbits The number of stop bits to use (1 or 2).
- * @param flowcontrol The flow control settings to use (0 = none, 1 = RTS/CTS,
- * 2 = XON/XOFF).
+ * @param[in] baudrate The baudrate to set.
+ * @param[in] bits The number of data bits to use (5, 6, 7 or 8).
+ * @param[in] parity The parity setting to use (0 = none, 1 = even, 2 = odd).
+ * @param[in] stopbits The number of stop bits to use (1 or 2).
+ * @param[in] flowcontrol The flow control settings to use (0 = none,
+ * 1 = RTS/CTS, 2 = XON/XOFF).
+ * @param[in] rts Status of RTS line (0 or 1; required by some interfaces).
+ * @param[in] dtr Status of DTR line (0 or 1; required by some interfaces).
*
- * @return SR_OK upon success, SR_ERR upon failure.
+ * @retval SR_OK Success
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_set_params(struct sr_serial_dev_inst *serial, int baudrate,
int bits, int parity, int stopbits,
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot configure unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot configure unopened serial port %s.", serial->port);
return SR_ERR;
}
- sr_spew("Setting serial parameters on port %s (fd %d).", serial->port,
- serial->fd);
+ sr_spew("Setting serial parameters on port %s.", serial->port);
sp_new_config(&config);
sp_set_config_baudrate(config, baudrate);
return SR_ERR_ARG;
case SP_ERR_FAIL:
error = sp_last_error_message();
- sr_err("Error setting serial port parameters: %s.", error);
+ sr_err("Error setting serial port parameters (%d): %s.",
+ sp_last_error_code(), error);
sp_free_error_message(error);
return SR_ERR;
}
* Set serial parameters for the specified serial port.
*
* @param serial Previously initialized serial port structure.
- * @param paramstr A serial communication parameters string, in the form
- * of <speed>/<data bits><parity><stopbits><flow>, for example "9600/8n1" or
- * "600/7o2" or "460800/8n1/flow=2" where flow is 0 for none, 1 for rts/cts and 2 for xon/xoff.
+ * @param[in] paramstr A serial communication parameters string, in the form
+ * of \<speed\>/\<data bits\>\<parity\>\<stopbits\>\<flow\>, for example
+ * "9600/8n1" or "600/7o2" or "460800/8n1/flow=2" where flow is 0 for none,
+ * 1 for rts/cts and 2 for xon/xoff.
*
- * @return SR_OK upon success, SR_ERR upon failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
#define SERIAL_COMM_SPEC "^(\\d+)/([5678])([neo])([12])(.*)$"
SR_PRIV int serial_set_paramstr(struct sr_serial_dev_inst *serial,
* @param serial Previously initialized serial port structure.
* @param buf Buffer where to store the bytes that are read.
* @param buflen Size of the buffer.
- * @param timeout_ms How long to wait for a line to come in.
+ * @param[in] timeout_ms How long to wait for a line to come in.
*
* Reading stops when CR of LR is found, which is stripped from the buffer.
*
- * @return SR_OK on success, SR_ERR on failure.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_readline(struct sr_serial_dev_inst *serial, char **buf,
int *buflen, gint64 timeout_ms)
gint64 start;
int maxlen, len;
- if (!serial || serial->fd == -1) {
+ if (!serial) {
sr_dbg("Invalid serial port.");
return SR_ERR;
}
- if (serial->fd == -1) {
- sr_dbg("Cannot use unopened serial port %s (fd %d).",
- serial->port, serial->fd);
+ if (!serial->data) {
+ sr_dbg("Cannot use unopened serial port %s.", serial->port);
return -1;
}
*
* @param serial Previously initialized serial port structure.
* @param buf Buffer containing the bytes to write.
- * @param count Size of the buffer.
- * @param packet_size Size, in bytes, of a valid packet.
+ * @param buflen Size of the buffer.
+ * @param[in] packet_size Size, in bytes, of a valid packet.
* @param is_valid Callback that assesses whether the packet is valid or not.
- * @param timeout_ms The timeout after which, if no packet is detected, to
+ * @param[in] timeout_ms The timeout after which, if no packet is detected, to
* abort scanning.
- * @param baudrate The baudrate of the serial port. This parameter is not
+ * @param[in] baudrate The baudrate of the serial port. This parameter is not
* critical, but it helps fine tune the serial port polling
* delay.
*
- * @return SR_OK if a valid packet is found within the given timeout,
- * SR_ERR upon failure.
+ * @retval SR_OK Valid packet was found within the given timeout
+ * @retval SR_ERR Failure.
*/
SR_PRIV int serial_stream_detect(struct sr_serial_dev_inst *serial,
uint8_t *buf, size_t *buflen,
maxlen = *buflen;
- sr_dbg("Detecting packets on FD %d (timeout = %" PRIu64
- "ms, baudrate = %d).", serial->fd, timeout_ms, baudrate);
+ sr_dbg("Detecting packets on %s (timeout = %" PRIu64
+ "ms, baudrate = %d).", serial->port, timeout_ms, baudrate);
if (maxlen < (packet_size / 2) ) {
sr_err("Buffer size must be at least twice the packet size.");
SR_PRIV int serial_source_add(struct sr_serial_dev_inst *serial, int events,
int timeout, sr_receive_data_callback_t cb, void *cb_data)
{
- return sr_source_add(serial->fd, events, timeout, cb, cb_data);
+#ifdef _WIN32
+ return SR_ERR;
+#else
+ int fd;
+ sp_get_port_handle(serial->data, &fd);
+ return sr_source_add(fd, events, timeout, cb, cb_data);
+#endif
+}
+
+SR_PRIV int serial_source_remove(struct sr_serial_dev_inst *serial)
+{
+#ifdef _WIN32
+ return SR_ERR;
+#else
+ int fd;
+ sp_get_port_handle(serial->data, &fd);
+ return sr_source_remove(fd);
+#endif
}
projects / libsigrok.git / blobdiff