* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
+/**
+ * @file
+ *
* Metex 14-bytes ASCII protocol parser.
*
+ * @internal
* This should work for various multimeters which use this kind of protocol,
* even though there is some variation in which modes each DMM supports.
*
#include "libsigrok.h"
#include "libsigrok-internal.h"
-/* Message logging helpers with subsystem-specific prefix string. */
-#define LOG_PREFIX "metex14: "
-#define sr_log(l, s, args...) sr_log(l, LOG_PREFIX s, ## args)
-#define sr_spew(s, args...) sr_spew(LOG_PREFIX s, ## args)
-#define sr_dbg(s, args...) sr_dbg(LOG_PREFIX s, ## args)
-#define sr_info(s, args...) sr_info(LOG_PREFIX s, ## args)
-#define sr_warn(s, args...) sr_warn(LOG_PREFIX s, ## args)
-#define sr_err(s, args...) sr_err(LOG_PREFIX s, ## args)
+#define LOG_PREFIX "metex14"
-static int parse_value(const uint8_t *buf, float *result)
+/** Parse value from buf, byte 2-8. */
+static int parse_value(const uint8_t *buf, struct metex14_info *info,
+ float *result)
{
int i, is_ol, cnt;
char valstr[7 + 1];
/* Bytes 5-7: Over limit (various forms) */
is_ol = 0;
- is_ol += (!strcmp((const char *)&valstr, ".OL")) ? 1 : 0;
- is_ol += (!strcmp((const char *)&valstr, "O.L")) ? 1 : 0;
- is_ol += (!strcmp((const char *)&valstr, "OL.")) ? 1 : 0;
- is_ol += (!strcmp((const char *)&valstr, "OL")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, ".OL")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "O.L")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "OL.")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "OL")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "-.OL")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "-O.L")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "-OL.")) ? 1 : 0;
+ is_ol += (!strcasecmp((const char *)&valstr, "-OL")) ? 1 : 0;
if (is_ol != 0) {
sr_spew("Over limit.");
*result = INFINITY;
return SR_OK;
}
+ /* Logic functions */
+ if (!strcmp((const char *)&valstr, "READY") ||
+ !strcmp((const char *)&valstr, "FLOAT")) {
+ *result = INFINITY;
+ info->is_logic = TRUE;
+ } else if (!strcmp((const char *)&valstr, "Hi")) {
+ *result = 1.0;
+ info->is_logic = TRUE;
+ } else if (!strcmp((const char *)&valstr, "Lo")) {
+ *result = 0.0;
+ info->is_logic = TRUE;
+ }
+ if (info->is_logic)
+ return SR_OK;
+
/* Bytes 2-8: Sign, value (up to 5 digits) and decimal point */
sscanf((const char *)&valstr, "%f", result);
char unit[4 + 1];
const char *u;
- /* Bytes 0-1: Measurement mode */
- /* Note: Protocol doesn't distinguish "resistance" from "beep" mode. */
- info->is_ac = !strncmp(buf, "AC", 2);
- info->is_dc = !strncmp(buf, "DC", 2);
- info->is_resistance = !strncmp(buf, "OH", 2);
- info->is_capacity = !strncmp(buf, "CA", 2);
- info->is_temperature = !strncmp(buf, "TE", 2);
- info->is_diode = !strncmp(buf, "DI", 2);
- info->is_frequency = !strncmp(buf, "FR", 2);
- info->is_gain = !strncmp(buf, "DB", 2);
- info->is_hfe = !strncmp(buf, "HF", 2);
-
- /*
- * Note: "DB" shows the logarithmic ratio of input voltage to a
- * pre-stored (user-changeable) value in the DMM.
- */
-
- if (info->is_dc || info->is_ac)
- info->is_volt = TRUE;
+ /* Bytes 0-1: Measurement mode AC, DC */
+ info->is_ac = !strncmp(buf, "AC", 2);
+ info->is_dc = !strncmp(buf, "DC", 2);
/* Bytes 2-8: See parse_value(). */
/* Bytes 9-12: Unit */
u = (const char *)&unit;
- if (!strcmp(u, "A"))
+ if (!strcasecmp(u, "A"))
info->is_ampere = TRUE;
- else if (!strcmp(u, "mA"))
+ else if (!strcasecmp(u, "mA"))
info->is_milli = info->is_ampere = TRUE;
- else if (!strcmp(u, "uA"))
+ else if (!strcasecmp(u, "uA"))
info->is_micro = info->is_ampere = TRUE;
- else if (!strcmp(u, "V"))
+ else if (!strcasecmp(u, "V"))
info->is_volt = TRUE;
- else if (!strcmp(u, "mV"))
+ else if (!strcasecmp(u, "mV"))
info->is_milli = info->is_volt = TRUE;
- else if (!strcmp(u, "Ohm"))
+ else if (!strcasecmp(u, "Ohm"))
info->is_ohm = TRUE;
- else if (!strcmp(u, "KOhm"))
+ else if (!strcasecmp(u, "KOhm"))
info->is_kilo = info->is_ohm = TRUE;
- else if (!strcmp(u, "MOhm"))
+ else if (!strcasecmp(u, "MOhm"))
info->is_mega = info->is_ohm = TRUE;
- else if (!strcmp(u, "nF"))
+ else if (!strcasecmp(u, "pF"))
+ info->is_pico = info->is_farad = TRUE;
+ else if (!strcasecmp(u, "nF"))
info->is_nano = info->is_farad = TRUE;
- else if (!strcmp(u, "uF"))
+ else if (!strcasecmp(u, "uF"))
info->is_micro = info->is_farad = TRUE;
- else if (!strcmp(u, "KHz"))
+ else if (!strcasecmp(u, "KHz"))
info->is_kilo = info->is_hertz = TRUE;
- else if (!strcmp(u, "C"))
+ else if (!strcasecmp(u, "C"))
info->is_celsius = TRUE;
- else if (!strcmp(u, "DB"))
+ else if (!strcasecmp(u, "DB"))
info->is_decibel = TRUE;
- else if (!strcmp(u, ""))
+ else if (!strcasecmp(u, ""))
info->is_unitless = TRUE;
+ /* Bytes 0-1: Measurement mode, except AC/DC */
+ info->is_resistance = !strncmp(buf, "OH", 2) ||
+ (!strncmp(buf, " ", 2) && info->is_ohm);
+ info->is_capacity = !strncmp(buf, "CA", 2) ||
+ (!strncmp(buf, " ", 2) && info->is_farad);
+ info->is_temperature = !strncmp(buf, "TE", 2);
+ info->is_diode = !strncmp(buf, "DI", 2) ||
+ (!strncmp(buf, " ", 2) && info->is_volt && info->is_milli);
+ info->is_frequency = !strncmp(buf, "FR", 2) ||
+ (!strncmp(buf, " ", 2) && info->is_hertz);
+ info->is_gain = !strncmp(buf, "DB", 2);
+ info->is_hfe = !strncmp(buf, "HF", 2) ||
+ (!strncmp(buf, " ", 2) && !info->is_volt && !info->is_ohm &&
+ !info->is_logic && !info->is_farad && !info->is_hertz);
+ /*
+ * Note:
+ * - Protocol doesn't distinguish "resistance" from "beep" mode.
+ * - "DB" shows the logarithmic ratio of input voltage to a
+ * pre-stored (user-changeable) value in the DMM.
+ */
+
/* Byte 13: Always '\r' (carriage return, 0x0d, 13) */
}
const struct metex14_info *info)
{
/* Factors */
+ if (info->is_pico)
+ *floatval /= 1000000000000ULL;
if (info->is_nano)
*floatval /= 1000000000;
if (info->is_micro)
analog->mq = SR_MQ_GAIN;
analog->unit = SR_UNIT_UNITLESS;
}
+ if (info->is_logic) {
+ analog->mq = SR_MQ_GAIN;
+ analog->unit = SR_UNIT_UNITLESS;
+ }
/* Measurement related flags */
if (info->is_ac)
/* Does the packet have more than one multiplier? */
count = 0;
+ count += (info->is_pico) ? 1 : 0;
count += (info->is_nano) ? 1 : 0;
count += (info->is_micro) ? 1 : 0;
count += (info->is_milli) ? 1 : 0;
count += (info->is_kilo) ? 1 : 0;
count += (info->is_mega) ? 1 : 0;
if (count > 1) {
- sr_err("More than one multiplier detected in packet.");
+ sr_dbg("More than one multiplier detected in packet.");
return FALSE;
}
count += (info->is_diode) ? 1 : 0;
count += (info->is_frequency) ? 1 : 0;
if (count > 1) {
- sr_err("More than one measurement type detected in packet.");
+ sr_dbg("More than one measurement type detected in packet.");
return FALSE;
}
/* Both AC and DC set? */
if (info->is_ac && info->is_dc) {
- sr_err("Both AC and DC flags detected in packet.");
+ sr_dbg("Both AC and DC flags detected in packet.");
return FALSE;
}
return TRUE;
}
+#ifdef HAVE_LIBSERIALPORT
SR_PRIV int sr_metex14_packet_request(struct sr_serial_dev_inst *serial)
{
const uint8_t wbuf = 'D';
return (serial_write(serial, &wbuf, 1) == 1) ? SR_OK : SR_ERR;
}
+#endif
SR_PRIV gboolean sr_metex14_packet_valid(const uint8_t *buf)
{
/* Don't print byte 13. That one contains the carriage return. */
sr_dbg("DMM packet: \"%.13s\"", buf);
- if ((ret = parse_value(buf, floatval)) != SR_OK) {
- sr_err("Error parsing value: %d.", ret);
+ memset(info_local, 0x00, sizeof(struct metex14_info));
+
+ if ((ret = parse_value(buf, info_local, floatval)) != SR_OK) {
+ sr_dbg("Error parsing value: %d.", ret);
return ret;
}
- memset(info_local, 0x00, sizeof(struct metex14_info));
parse_flags((const char *)buf, info_local);
handle_flags(analog, floatval, info_local);