metex14: Support DMMs with whitespace differences.

[libsigrok.git] / hardware / common / dmm / metex14.c

diff --git a/hardware/common/dmm/metex14.c b/hardware/common/dmm/metex14.c
index 9091885614d2c46e8754e594fe8aca62a4428392..2ef5ecff7459d4f637964c0b794006fd123a13fb 100644 (file)
--- a/hardware/common/dmm/metex14.c
+++ b/hardware/common/dmm/metex14.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the libsigrok project.
  *
- * Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -117,6 +117,10 @@ static int parse_value(const uint8_t *buf, float *result)
 
 static void parse_flags(const char *buf, struct metex14_info *info)
 {
+       int i, cnt;
+       char unit[4 + 1];
+       const char *u;
+
        /* Bytes 0-1: Measurement mode */
        /* Note: Protocol doesn't distinguish "resistance" from "beep" mode. */
        info->is_ac          = !strncmp(buf, "AC", 2);
@@ -142,33 +146,39 @@ static void parse_flags(const char *buf, struct metex14_info *info)
        /* Bytes 3-8: See parse_value(). */
 
        /* Bytes 9-12: Unit */
-       if (!strncmp(buf + 9, "   A", 4))
+       memset(&unit, 0, 4 + 1);
+       for (i = 0, cnt = 0; i < 4; i++) {
+               if (buf[9 + i] != ' ')
+                       unit[cnt++] = buf[9 + i];
+       }
+       u = (const char *)&unit;
+       if (!strcmp(u, "A"))
                info->is_ampere = TRUE;
-       else if (!strncmp(buf + 9, "  mA", 4))
+       else if (!strcmp(u, "mA"))
                info->is_milli = info->is_ampere = TRUE;
-       else if (!strncmp(buf + 9, "  uA", 4))
+       else if (!strcmp(u, "uA"))
                info->is_micro = info->is_ampere = TRUE;
-       else if (!strncmp(buf + 9, "   V", 4))
+       else if (!strcmp(u, "V"))
                info->is_volt = TRUE;
-       else if (!strncmp(buf + 9, "  mV", 4))
+       else if (!strcmp(u, "mV"))
                info->is_milli = info->is_volt = TRUE;
-       else if (!strncmp(buf + 9, " Ohm", 4))
+       else if (!strcmp(u, "Ohm"))
                info->is_ohm = TRUE;
-       else if (!strncmp(buf + 9, "KOhm", 4))
+       else if (!strcmp(u, "KOhm"))
                info->is_kilo = info->is_ohm = TRUE;
-       else if (!strncmp(buf + 9, "MOhm", 4))
+       else if (!strcmp(u, "MOhm"))
                info->is_mega = info->is_ohm = TRUE;
-       else if (!strncmp(buf + 9, "  nF", 4))
+       else if (!strcmp(u, "nF"))
                info->is_nano = info->is_farad = TRUE;
-       else if (!strncmp(buf + 9, "  uF", 4))
+       else if (!strcmp(u, "uF"))
                info->is_micro = info->is_farad = TRUE;
-       else if (!strncmp(buf + 9, " KHz", 4))
+       else if (!strcmp(u, "KHz"))
                info->is_kilo = info->is_hertz = TRUE;
-       else if (!strncmp(buf + 9, "   C", 4))
+       else if (!strcmp(u, "C"))
                info->is_celsius = TRUE;
-       else if (!strncmp(buf + 9, "  DB", 4))
+       else if (!strcmp(u, "DB"))
                info->is_decibel = TRUE;
-       else if (!strncmp(buf + 9, "    ", 4))
+       else if (!strcmp(u, ""))
                info->is_unitless = TRUE;
 
        /* Byte 13: Always '\r' (carriage return, 0x0d, 13) */
@@ -232,6 +242,8 @@ static void handle_flags(struct sr_datafeed_analog *analog, float *floatval,
                analog->mqflags |= SR_MQFLAG_AC;
        if (info->is_dc)
                analog->mqflags |= SR_MQFLAG_DC;
+       if (info->is_diode)
+               analog->mqflags |= SR_MQFLAG_DIODE;
 }
 
 static gboolean flags_valid(const struct metex14_info *info)