#include <ftdi.h>
#include <glib.h>
+#include <string.h>
#include <sigrok.h>
#include <sigrok-internal.h>
#define SDRAM_SIZE (8 * 1024 * 1024)
#define MIN_NUM_SAMPLES 1
+#define BS 4096 /* Block size */
+#define NUM_BLOCKS 2048 /* Number of blocks */
+
static GSList *device_instances = NULL;
struct la8 {
/** The current sampling limit (in number of samples). */
uint64_t limit_samples;
- /** The number of probes. */
- int num_probes;
-
/** TODO */
gpointer session_id;
/**
- * An 8MB buffer containing the (mangled) samples from the device.
+ * A buffer containing some (mangled) samples from the device.
* Format: Pretty mangled-up (due to hardware reasons), see code.
*/
- uint8_t *mangled_buf;
+ uint8_t mangled_buf[BS];
/**
* An 8MB buffer where we'll store the de-mangled samples.
/** Time (in seconds) before the trigger times out. */
uint64_t trigger_timeout;
+ /** Tells us whether an SR_DF_TRIGGER packet was already sent. */
+ int trigger_found;
+
/** TODO */
time_t done;
- /** Counter/index for the data block (0..2047) to be read. */
+ /** Counter/index for the data block to be read. */
int block_counter;
/** The divcount value (determines the sample period) for the LA8. */
*/
static int la8_reset(struct la8 *la8)
{
- uint8_t buf[4096];
+ uint8_t buf[BS];
time_t done, now;
int bytes_read;
done = 20 + time(NULL);
do {
/* TODO: Ignore errors? Check for < 0 at least! */
- bytes_read = la8_read(la8, (uint8_t *)&buf, 4096);
+ bytes_read = la8_read(la8, (uint8_t *)&buf, BS);
now = time(NULL);
} while ((done > now) && (bytes_read > 0));
la8->cur_samplerate = SR_MHZ(100); /* 100MHz == max. samplerate */
la8->limit_msec = 0;
la8->limit_samples = 0;
- la8->num_probes = NUM_PROBES;
la8->session_id = NULL;
- la8->mangled_buf = NULL;
+ memset(la8->mangled_buf, 0, BS);
la8->final_buf = NULL;
la8->trigger_pattern = 0x00; /* Value irrelevant, see trigger_mask. */
la8->trigger_mask = 0x00; /* All probes are "don't care". */
la8->trigger_timeout = 10; /* Default to 10s trigger timeout. */
+ la8->trigger_found = 0;
la8->done = 0;
la8->block_counter = 0;
la8->divcount = 0; /* 10ns sample period == 100MHz samplerate */
- /* Allocate memory for the raw (mangled) data from the LA8. */
- if (!(la8->mangled_buf = g_try_malloc(SDRAM_SIZE))) {
- sr_err("la8: %s: mangled_buf malloc failed", __func__);
- ret = SR_ERR_MALLOC;
- goto err_free_la8;
- }
-
/* Allocate memory where we'll store the de-mangled data. */
if (!(la8->final_buf = g_try_malloc(SDRAM_SIZE))) {
sr_err("la8: %s: final_buf malloc failed", __func__);
ret = SR_ERR_MALLOC;
- goto err_free_mangled_buf;
+ goto err_free_la8;
}
/* Allocate memory for the FTDI context (ftdic) and initialize it. */
free(la8->ftdic); /* NOT g_free()! */
err_free_final_buf:
g_free(la8->final_buf);
-err_free_mangled_buf:
- g_free(la8->mangled_buf);
err_free_la8:
g_free(la8);
err_free_nothing:
return SR_OK;
}
-static void hw_closedev(int device_index)
+static int hw_closedev(int device_index)
{
struct sr_device_instance *sdi;
struct la8 *la8;
if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
sr_err("la8: %s: sdi was NULL", __func__);
- return;
+ return SR_ERR; /* TODO: SR_ERR_ARG? */
}
if (!(la8 = sdi->priv)) {
sr_err("la8: %s: sdi->priv was NULL", __func__);
- return;
+ return SR_ERR; /* TODO: SR_ERR_ARG? */
}
sr_dbg("la8: closing device");
if (sdi->status == SR_ST_ACTIVE) {
sr_dbg("la8: %s: status ACTIVE, closing device", __func__);
+ /* TODO: Really ignore errors here, or return SR_ERR? */
(void) la8_close_usb_reset_sequencer(la8); /* Ignore errors. */
} else {
sr_dbg("la8: %s: status not ACTIVE, nothing to do", __func__);
sdi->status = SR_ST_INACTIVE;
sr_dbg("la8: %s: freeing sample buffers", __func__);
- free(la8->mangled_buf);
- free(la8->final_buf);
+ g_free(la8->final_buf);
+
+ return SR_OK;
}
static void hw_cleanup(void)
}
/**
- * Get a block of 4096 bytes of data from the LA8.
+ * Get a block of data from the LA8.
*
* @param la8 The LA8 struct containing private per-device-instance data.
* @return SR_OK upon success, or SR_ERR upon errors.
// sr_dbg("la8: %s: reading block %d", __func__, la8->block_counter);
- bytes_read = la8_read(la8, la8->mangled_buf, 4096);
+ bytes_read = la8_read(la8, la8->mangled_buf, BS);
/* If first block read got 0 bytes, retry until success or timeout. */
if ((bytes_read == 0) && (la8->block_counter == 0)) {
do {
// sr_dbg("la8: %s: reading block 0 again", __func__);
- bytes_read = la8_read(la8, la8->mangled_buf, 4096);
+ bytes_read = la8_read(la8, la8->mangled_buf, BS);
/* TODO: How to handle read errors here? */
now = time(NULL);
} while ((la8->done > now) && (bytes_read == 0));
}
/* Check if block read was successful or a timeout occured. */
- if (bytes_read != 4096) {
+ if (bytes_read != BS) {
sr_warn("la8: %s: trigger timed out", __func__);
(void) la8_reset(la8); /* Ignore errors. */
return SR_ERR;
/* De-mangle the data. */
// sr_dbg("la8: de-mangling samples of block %d", la8->block_counter);
- byte_offset = la8->block_counter * 4096;
+ byte_offset = la8->block_counter * BS;
m = byte_offset / (1024 * 1024);
mi = m * (1024 * 1024);
- for (i = 0; i < 4096; i++) {
+ for (i = 0; i < BS; i++) {
p = i & (1 << 0);
index = m * 2 + (((byte_offset + i) - mi) / 2) * 16;
index += (la8->divcount == 0) ? p : (1 - p);
return SR_OK;
}
+static void send_block_to_session_bus(struct la8 *la8, int block)
+{
+ int i;
+ uint8_t sample, expected_sample;
+ struct sr_datafeed_packet packet;
+ int trigger_point; /* Relative trigger point (in this block). */
+
+ /* Note: No sanity checks on la8/block, caller is responsible. */
+
+ /* Check if we can find the trigger condition in this block. */
+ trigger_point = -1;
+ expected_sample = la8->trigger_pattern & la8->trigger_mask;
+ for (i = 0; i < BS; i++) {
+ /* Don't continue if the trigger was found previously. */
+ if (la8->trigger_found)
+ break;
+
+ sample = *(la8->final_buf + (block * BS) + i);
+
+ if ((sample & la8->trigger_mask) == expected_sample) {
+ trigger_point = i;
+ la8->trigger_found = 1;
+ break;
+ }
+ }
+
+ /* If no trigger was found, send one SR_DF_LOGIC packet. */
+ if (trigger_point == -1) {
+ /* Send an SR_DF_LOGIC packet to the session bus. */
+ // sr_dbg("la8: %s: sending SR_DF_LOGIC packet", __func__);
+ packet.type = SR_DF_LOGIC;
+ packet.length = BS;
+ packet.unitsize = 1;
+ packet.payload = la8->final_buf + (block * BS);
+ sr_session_bus(la8->session_id, &packet);
+ return;
+ }
+
+ /*
+ * We found the trigger, so some special handling is needed. We have
+ * to send an SR_DF_LOGIC packet with the samples before the trigger
+ * (if any), then the SD_DF_TRIGGER packet itself, then another
+ * SR_DF_LOGIC packet with the samples after the trigger (if any).
+ */
+
+ /* TODO: Send SR_DF_TRIGGER packet before or after the actual sample? */
+
+ /* If at least one sample is located before the trigger... */
+ if (trigger_point > 0) {
+ /* Send pre-trigger SR_DF_LOGIC packet to the session bus. */
+ sr_dbg("la8: %s: sending pre-trigger SR_DF_LOGIC packet, ",
+ "start = %" PRIu64 ", length = %d", __func__,
+ block * BS, trigger_point);
+ packet.type = SR_DF_LOGIC;
+ packet.length = trigger_point;
+ packet.unitsize = 1;
+ packet.payload = la8->final_buf + (block * BS);
+ sr_session_bus(la8->session_id, &packet);
+ }
+
+ /* Send the SR_DF_TRIGGER packet to the session bus. */
+ sr_dbg("la8: %s: sending SR_DF_TRIGGER packet, sample = %" PRIu64,
+ __func__, (block * BS) + trigger_point);
+ packet.type = SR_DF_TRIGGER;
+ packet.length = 0;
+ packet.unitsize = 0;
+ packet.payload = NULL;
+ sr_session_bus(la8->session_id, &packet);
+
+ /* If at least one sample is located after the trigger... */
+ if (trigger_point < (BS - 1)) {
+ /* Send post-trigger SR_DF_LOGIC packet to the session bus. */
+ sr_dbg("la8: %s: sending post-trigger SR_DF_LOGIC packet, ",
+ "start = %" PRIu64 ", length = %d", __func__,
+ (block * BS) + trigger_point, (BS - 1) - trigger_point);
+ packet.type = SR_DF_LOGIC;
+ packet.length = (BS - 1) - trigger_point;
+ packet.unitsize = 1;
+ packet.payload = la8->final_buf + (block * BS) + trigger_point;
+ sr_session_bus(la8->session_id, &packet);
+ }
+}
+
static int receive_data(int fd, int revents, void *user_data)
{
int i, ret;
struct sr_device_instance *sdi;
- struct sr_datafeed_packet packet;
struct la8 *la8;
/* Avoid compiler errors. */
return FALSE;
}
- /* Get one block of data (4096 bytes). */
+ /* Get one block of data. */
if ((ret = la8_read_block(la8)) < 0) {
sr_err("la8: %s: la8_read_block error: %d", __func__, ret);
hw_stop_acquisition(sdi->index, user_data);
return FALSE;
}
- /* We need to get exactly 2048 blocks (i.e. 8MB) of data. */
- if (la8->block_counter != 2047) {
+ /* We need to get exactly NUM_BLOCKS blocks (i.e. 8MB) of data. */
+ if (la8->block_counter != (NUM_BLOCKS - 1)) {
la8->block_counter++;
return TRUE;
}
sr_dbg("la8: sampling finished, sending data to session bus now");
/* All data was received and demangled, send it to the session bus. */
- for (i = 0; i < 2048; i++) {
- /* Send a 4096 byte SR_DF_LOGIC packet to the session bus. */
- // sr_dbg("la8: %s: sending SR_DF_LOGIC packet", __func__);
- packet.type = SR_DF_LOGIC;
- packet.length = 4096;
- packet.unitsize = 1;
- packet.payload = la8->final_buf + (i * 4096);
- sr_session_bus(la8->session_id, &packet);
- }
+ for (i = 0; i < NUM_BLOCKS; i++)
+ send_block_to_session_bus(la8, i);
hw_stop_acquisition(sdi->index, user_data);
gettimeofday(&header.starttime, NULL);
header.samplerate = la8->cur_samplerate;
header.protocol_id = SR_PROTO_RAW;
- header.num_logic_probes = la8->num_probes;
+ header.num_logic_probes = NUM_PROBES;
header.num_analog_probes = 0;
sr_session_bus(session_device_id, &packet);
la8->done = (la8->divcount + 1) * 0.08388608 + time(NULL)
+ la8->trigger_timeout;
la8->block_counter = 0;
+ la8->trigger_found = 0;
/* Hook up a dummy handler to receive data from the LA8. */
sr_source_add(-1, G_IO_IN, 0, receive_data, sdi);
.api_version = 1,
.init = hw_init,
.cleanup = hw_cleanup,
- .open = hw_opendev,
- .close = hw_closedev,
+ .opendev = hw_opendev,
+ .closedev = hw_closedev,
.get_device_info = hw_get_device_info,
.get_status = hw_get_status,
.get_capabilities = hw_get_capabilities,
projects / libsigrok.git / blobdiff